1. บทนำ
The PAC L.O.C. Pro Advanced Audio Integration T-Harness (Model LPHGM51) is designed to simplify the integration of aftermarket audio equipment with your vehicle's factory radio system. This vehicle-specific T-harness provides all necessary high-level inputs and speaker outputs, allowing for the addition of aftermarket amplifiers or signal processors while retaining the original factory radio.
หมายเหตุสำคัญ: This product is specifically designed for OEM non-amplified systems and is not for use in vehicles with a factory ampชีวิต.
2. ความเข้ากันได้
The LPHGM51 T-Harness is compatible with select 2018 to 2023 non-amplified GM vehicles. Please verify your vehicle's compatibility before installation.
Compatible Vehicles (All Trim Levels, Non-Amplified Systems):
- บิวอิค : Envision 2017, LaCrosse 2016, Regal 2014-2015
- คาดิลแลค: ATS 2015-2016, CTS 2014-2015, Escalade 2015, SRX 2015-2016, XT5 2017
- เชฟโรเลต : Camaro 2016-2018 (with 8-in. screen IO5/IO6), Colorado 2015-2016, Cruze 2016-2017, Impala Non-Classic 2014-2016 (with 8-in. screen IO5/IO6), Impala 2017-2019 (with 8-in. screen IO5/IO6), Malibu Non-Classic 2016, Malibu 2017-2018, Silverado 2014-2017, Silverado 2018 (with 8-in. screen IO5/IO6), Silverado Classic 2019 (with 8-in. screen IO5/IO6), Silverado HD 2015-2019, Sonic 2017, Spark 2015 and 2018
3. การตั้งค่าและการติดตั้ง
3.1 อะไรอยู่ในกล่อง
- PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51)
- คู่มือการใช้งาน
3.2 ข้อควรพิจารณาก่อนการติดตั้ง
- ความปลอดภัยเป็นสิ่งสำคัญที่สุด: Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent short circuits and damage.
- แนะนำการติดตั้งอย่างมืออาชีพ: If you are not familiar with car audio wiring and vehicle disassembly, professional installation is highly recommended.
- เครื่องมือที่จำเป็น: Basic tools such as wire strippers, crimpers, electrical tape, zip ties, and a panel removal tool may be necessary.
- โรงงาน Amplifier Check: Confirm your vehicle does ไม่ have a factory-installed amplifier. This harness is incompatible with ampระบบ lified
3.3 ขั้นตอนการติดตั้ง
- Access the Factory Radio: Carefully remove the necessary trim panels and components to gain access to the back of your vehicle's factory radio. Refer to your vehicle's service manual for specific instructions.
- Disconnect Factory Harness: Locate and disconnect the main wiring harness from the back of the factory radio.
- Connect T-Harness: Connect the male end of the LPHGM51 T-Harness to the factory radio. Then, connect the female end of the LPHGM51 T-Harness to the vehicle's factory wiring harness that was just disconnected.
- Wire Aftermarket Equipment: The T-harness provides labeled wires for high-level audio outputs (e.g., front left speaker +, front left speaker -, etc.). Connect these wires to the corresponding inputs on your aftermarket amplifier or signal processor. Ensure all connections are secure and properly insulated.
- การเดินสายไฟที่ปลอดภัย: Route and secure all wiring to prevent pinching, chafing, or interference. Use zip ties to keep cables tidy.
- ระบบทดสอบ: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal and test the audio system to ensure proper functionality of both the factory radio and aftermarket components.
- ประกอบกลับเข้าที่: Once confirmed working, carefully reassemble all removed trim panels and components.
รูปที่ 1: เกินview of the PAC L.O.C. Pro Advanced Audio Integration T-Harness, showing the main connectors and individual speaker wire outputs.
รูปที่ 2: ตัวปิด view of the PAC L.O.C. Pro T-Harness, illustrating the connection points for factory and aftermarket wiring.
4. การใช้งานระบบ
Once the PAC L.O.C. Pro Advanced Audio Integration T-Harness is correctly installed, its operation is seamless and integrated with your vehicle's existing audio system. The harness functions as an intermediary, providing high-level audio signals from your factory radio to your aftermarket audio components without altering the factory radio's functionality.
- Your factory radio will operate as normal, controlling volume, source selection, and tone.
- The audio signals are passed through the T-harness to your aftermarket amplifier or signal processor, which then processes and amplifies the sound for your aftermarket speakers.
- Adjustments to sound quality (e.g., bass, treble, balance, fader) will primarily be managed through your factory radio, while specific amplifier settings (gain, crossover) will be managed on the aftermarket equipment.
5. การบำรุงรักษา
The PAC L.O.C. Pro Advanced Audio Integration T-Harness is designed for durable, long-term, and maintenance-free operation. No routine maintenance is required for the harness itself.
- ความสมบูรณ์ของการเชื่อมต่อ: Ensure all connections made during installation remain secure and free from moisture or physical damage. Loose connections can lead to intermittent audio or signal loss.
- การตรวจสอบสายไฟ: If you experience any audio issues, a visual inspection of the wiring for signs of wear, fraying, or damage is recommended.
- การปกป้องสิ่งแวดล้อม: Keep the harness and connected components away from excessive heat, moisture, and corrosive substances.
6 การแก้ไขปัญหา
If you encounter issues after installing the LPHGM51 T-Harness, refer to the following troubleshooting guide:
6.1 No Audio Output from Aftermarket System
- ตรวจสอบการเชื่อมต่อ: Verify that all connections between the T-harness, factory radio, vehicle harness, and aftermarket equipment are secure and correctly seated.
- Aftermarket Equipment Power: Ensure your aftermarket amplifier or signal processor is receiving power and is turned on. Check its power, ground, and remote turn-on connections.
- โรงงาน Ampเครื่องฟอก: Double-check that your vehicle does not have a factory amplifier. This harness is not compatible with ampระบบ lified
- การเลือกแหล่งที่มา: Confirm the factory radio is set to an active audio source (e.g., radio, media player).
6.2 Distorted or Poor Audio Quality
- การตั้งค่าเกน: Adjust the gain settings on your aftermarket amplifier. Incorrect gain settings can lead to distortion.
- ความสมบูรณ์ของสายไฟ: Inspect all audio signal wires for shorts, breaks, or poor insulation. Ensure they are not running too close to power wires, which can cause interference.
- การต่อลงดิน: Verify that the ground connection for your aftermarket equipment is solid and free of corrosion.
6.3 Intermittent Audio
- การเชื่อมต่อหลวม: Re-check all harness and wiring connections for any looseness.
- Damaged Wiring: Inspect wiring for any signs of damage or intermittent contact.
7. ข้อมูลจำเพาะ
| คุณลักษณะ | ข้อมูลจำเพาะ |
| ยี่ห้อ | แพค |
| แบบอย่าง | แอลพีเอชจีเอ็ม51 |
| วัสดุ | Locpro |
| ขนาดรายการ (ยาว x กว้าง x สูง) | 8 x 8 x 1 นิ้ว |
| น้ำหนักสินค้า | 4.9 ออนซ์ (0.14 กิโลกรัม) |
| ประเภทขั้วต่อ | GM-specific Connector |
| เส้นผ่านศูนย์กลางลวด | 1.02 มิลลิเมตร |
| ยูพีซี | 609098900485 |
| ความเข้ากันได้ | Select 2018-2023 Non-Amplified GM Vehicles |
8. ข้อมูลการรับประกัน
Specific warranty details for the PAC L.O.C. Pro Advanced Audio Integration T-Harness (LPHGM51) are not provided in this manual. For comprehensive warranty information, including terms, conditions, and duration, please refer to the official PAC Audio webสถานที่หรือบรรจุภัณฑ์ของผลิตภัณฑ์
9. การสนับสนุนลูกค้า
For technical assistance, installation questions, or any other inquiries regarding your PAC L.O.C. Pro Advanced Audio Integration T-Harness, please contact PAC Audio customer support directly. You can typically find contact information and support resources on the official PAC Audio webเว็บไซต์.
Webเว็บไซต์: https://pac-audio.com/ (Please check for the most current URL)
