คู่มือและคู่มือผู้ใช้ PAC

แพค (Pacific Accessory Corporation) is a trusted name in the mobile electronics industry, providing essential integration solutions for car audio installations. As a part of Stinger Solutions (AAMP Global), PAC develops technology that allows aftermarket radios, amplifiers, and safety cameras to work seamlessly with complex factory vehicle wiring and data bus systems.

Key product lines include:

• RadioPRO: All-in-one radio replacement interfaces that retain factory features such as steering wheel controls and OnStar.
• Ampข้อดี: ขั้นสูง amplifier interfaces that provide a clean, variable pre-amp output for aftermarket sound systems.
• SWI Series: Universal and vehicle-specific steering wheel control retention modules.
• Integration Accessories: Harnesses, antenna adapters, and dash kits for a professional finish.

Whether you are upgrading a Jeep, Ford, GM, or Toyota, PAC offers the hardware and firmware needed to ensure a plug-and-play installation.

• How do I update the firmware on my PAC interface?

  Most PAC interfaces can be updated using the RadioPRO PC Application or a specific updater tool. Connect the module to your computer via USB and download the latest firmware from the PAC Audio webเว็บไซต์.

• อะไรเป็นสาเหตุ AmpPRO interface do?

  การ AmpPRO interface (e.g., AP4 series) allows you to add aftermarket amplifiers to a factory sound system while retaining the factory radio's volume, balance, and fade controls. It provides a clean, variable pre-amp เอาท์พุต

• How do I retain steering wheel controls with a new radio?

  PAC offers steering wheel control (SWC) interfaces like the SWI-CP5. Many RadioPRO replacement kits also include built-in SWC retention that is pre-programmed for specific vehicles.

• Why is there no audio after installing my radio replacement kit?

  หากรถของคุณมีโรงงาน amplifier, ensure the interface is connected to the correct amplified output port and that the factory amplifier turn-on wire (usually Blue/White) is connected. You may need to cycle the ignition to initialize the factory system.