PINE64 PineVoice Speaker User Guide

PINE64 PineVoice Speaker

เนื้อหาแพ็คเกจ

ข้อควรระวัง
ก่อนใช้อุปกรณ์ โปรดอ่านคู่มือนี้อย่างละเอียด

• The Pine Voice speaker device should be using a 5W (1A 5V) power adapter. Using at a higher voltagอาจส่งผลให้เกิดความเสียหายได้
• The device should never be operated with an external temperature lower than 0°C or higher than 40°C.
• Do not disassemble the Pine Voice. It is sealed using a compound to keep better sound quality.
• Comply with local regulations pertaining to using Pine Voice devices. This includes use in public spaces, when operating motor vehicles and heavy machinery.

การรีไซเคิลส่วนประกอบ
Recycling of the PineVoice or its components should be done according to local regulation. This may require you to dispose of the speaker or its parts at a local recycling centre or at a designated container. Please consult local legislation for details.

การเริ่มต้น

• Connect the provided USB cord into a USB-A Host Port delivering 5W (1A 5V). On startup, the ring LED gently pulses white, indicating the speaker device is ready. Next, the ring LED will blink yellow.
• Follow the WiFi Setup chapter to connect your speaker device. If the ring displays a different color, perform a factory reset as described in the Factory Reset chapter.

 ตั้งค่า WiFi

• The speaker device enters WiFi provisioning mode automatically on first boot, indicated by the ring LED blinking yellow. If the ring is not blinking yellow, perform a factory reset to enter provisioning mode.
• PineVoice implements open-source WiFi Provisioning protocol Improv. Any application supporting this protocol is capable of setting up WiFi on the PineVoice.

Here are some of available options:

•  Webเว็บไซต์ https://pine64.org/documentation/PineVoice/WiFi_Setup/
• Webเว็บไซต์ https://www.improv-wifi.com/
• Home Assistant ‒ requires Bluetooth Low Energy adapter available on the server

Link with Home Assistance
To link the PineVoice with a SBC (Single Board Computer) or PC (Personal Computer), you’ll need the Home Assistance software preinstalled. PineVoice implements open-source voice assistant protocol Wyoming, so any Home Assistance software supporting this protocol is compatible with the PineVoice, such as Home Assistant OS.

The PineVoice implements auto-discovery, so the device should be visible in the dashboard of Home Assistance automatically after connection to the WiFi network. For more information, please visit https://pine64.org/documentation/PineVoice/Assistance_Setup/

รีเซ็ตเป็นค่าโรงงาน
To factory reset the speaker device, turn it on, hold the dot button for 15 seconds, and then release the button. PineVoice should reset and start WiFi setup. Please follow the WiFi Setup chapter.

การอัพเดตเฟิร์มแวร์
To update your firmware, you need the PineVoice to be connected via USB cable to a PC with a companion app installed. Each platform and companion app have a different process that needs to be followed to successfully update. The process usually involves downloading the newest firmware onto the device running the companion app and updating from the user interface. Newest releases and pre-releases of PineVoice repository

 ฮาร์ดแวร์

Detailed specifications including schematics can be found on our Wiki: https://wiki.pine64.org/wiki/PineVoice

• ขนาด: 65 x 63 x 85มม.
•  น้ำหนัก : 160 กรัม
•  System on Chip: Bouffalo BL606P
  • แฟลช: 16MB
  • แรม: 788KB
  • Embedded 4MB PSRAM
• Bluetooth: 5.x dual mode (BT + BLE)
•  Wifi: 802.11 b/g/n
• Input: Dual Microphone
• Output: Speaker (Mono)

การปฏิบัติตามกฎระเบียบ
The PineVoice is CE and FCC certified.

 เอกสารและข้อมูลการติดต่อ
Detailed hardware and software documentation can be located on our Wiki วิกิ.pine64.org

ติดต่อ

• สอบถามการขาย: sales@pine64.org
  สนับสนุน: support@pine64.org
  สอบถามข้อมูลทั่วไป: info@pine64.org