MOSS-โลโก้

MOSS IllumaSync Software

MOSS-IllumaSync-Software-PRODUCT

ข้อมูลจำเพาะ

  • Product Name: IllumaSyncTM Software
  • Compatible with: IllumaDimTM product family of LED controllers
  • Manufacturer: Moss LED
  • ติดต่อ: www.mossled.com | 1.800.924.1585 | 416.463.6677 |
  • info@mossled.com

คำแนะนำการใช้ผลิตภัณฑ์

SINGLE UPLOAD FIRMWARE UPDATE

  • ฟังก์ชันการทำงาน: Upload firmware to one IllumaDimTM device at a time. This method is most successful.
  • สำคัญ: If other devices are powered on, they may flash randomly. Power off other devices or put them in manual mode.
  • ฟังก์ชั่น RDM: Press the RDM button next to each device in the list to access basic RDM functions.

Connect & Discover Devices:

  1. Press Connect in the Individual Update tab.
  2. If an error occurs, reinsert the USB and ensure the computer recognizes the device dongle.
  3. Press Discover All to list connected devices.

Select Firmware & Update Devices:

  1. Click Browse and choose the firmware file.
  2. Select the device and press Update. Expect flashing if other devices are not powered off.

วิธีการทางเลือก:

  • Click the software version number to update a specific device.
  • Factory reset your device after firmware update by holding down the BACK & ENTER buttons.

IllumaSync™ Software Guide

IllumaSync™ software is designed to work with the IllumaDim™ product family of LED controllers. The software allows for firmware updates, setting updates, and simple DMX testing and control. Too use the software, you will require three things:

  • One or more IllumaDim™ Products from Moss LED™
  • IllumaSync™ software from the Moss LED™ webเว็บไซต์
  • IllumaSync™ USB Dongle

สำคัญ

  1. Before you start, ensure that all devices are connected via DMX cabling and are powered on.
  2. It is advised to only have IllumaDim™ products on the DMX chain when operating the IllumaSync Software.
  3. Moss LED has not tested the effects of running the IllumaDim™ software while using non-IllumaDim™ products, and the effects are unknown.
  4. Moss LED cannot be held liable for any unwanted effects caused by running IllumaSync™ software on nonnon-IllumaDim™™ products.

MOSS-IllumaSync-Software-FIG- (1)

SINGLE UPLOAD FIRMWARE UPDATE

  • MOSS-IllumaSync-Software-FIG- (2)Functionality: Upload firmware to one IllumaDim™ device at a time. This method is most successful.
  • สำคัญ: If other devices are powered on, they may flash randomly. Power other devices off or put them in manual mode.
  • MOSS-IllumaSync-Software-FIG- (3)RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

MOSS-IllumaSync-Software-FIG- (4)MOSS-IllumaSync-Software-FIG- (5)

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

GROUP FIRMWARE UPDATE

  • MOSS-IllumaSync-Software-FIG- (2)Functionality: Upload firmware to multiple IllumaDim™ devices at a time.
  • Recommended: Use when devices are physically close together and connected with a professional DMX cable.
  • MOSS-IllumaSync-Software-FIG- (3)RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

MOSS-IllumaSync-Software-FIG- (6)MOSS-IllumaSync-Software-FIG- (7)

If the device gets stuck in update mode, power cycle the device and try again.
Do not remove power from the device during firmware update

GROUP SETTINGS UPDATE


  • MOSS-IllumaSync-Software-FIG- (2)Functionality: Configure the settings of multiple IllumaDIM™ devices simultaneously
  • Recommended: Use when devices are physically close together and connected with a professional DMX cable.
  • MOSS-IllumaSync-Software-FIG- (3)RDM Function: Press the RDM button next to each device in the list to access basic RDM functions.

MOSS-IllumaSync-Software-FIG- (8)MOSS-IllumaSync-Software-FIG- (9)

DMX TESTER

MOSS-IllumaSync-Software-FIG- (10)Functionality: IllumaSync™ can be used as a DMX tester for 1 universe at a time.

MOSS-IllumaSync-Software-FIG- (11)MOSS-IllumaSync-Software-FIG- (12)

คำถามที่พบบ่อย

Q: What should I do if a device gets stuck in update mode?
A: Power cycle the device and try the update process again. Do not remove power during firmware update.

เอกสาร / แหล่งข้อมูล

MOSS IllumaSync Software [พีดีเอฟ] คู่มือการใช้งาน
IllumaDimTM, USB to DMX Dongle Cable, IllumaSync Software, Software

อ้างอิง

ฝากความคิดเห็น

ที่อยู่อีเมลของคุณจะไม่ถูกเผยแพร่ ช่องที่ต้องกรอกข้อมูลมีเครื่องหมาย *