Godox iT32 Camera Flash Instruction Manual

Godox iT32 Camera Flash

ข้อมูลจำเพาะ

• แบบอย่าง: ไอที32
• รหัสสินค้า : 705-YT3200-00
• ขนาด : 80*100มม.
• ผู้ผลิต: GODOX โฟโต้ อีควิปเมนท์ บจก.
• วันที่ผลิต : 2025/10/9
• ประเทศต้นกำเนิด: ผลิตในประเทศจีน
• Webเว็บไซต์: www.godox.com

การตั้งค่าทั่วไป:

• Ensure the flash unit is compatible with your camera model.
• Attach the flash securely to your camera’s hot shoe.
• Power on the flash unit and the camera.
• Adjust flash settings (power, mode, etc.) according to your shooting needs.
• Refer to the camera’s manual for optimal flash synchronization settings.

การแก้ไขปัญหา

Issue: Flash not firing.

• Check battery levels and ensure batteries are inserted correctly.
• Verify the flash is securely mounted on the camera.
• Ensure the flash is powered on.
• Check camera settings for flash synchronization.
• Test with a different camera or trigger if possible.

Issue: Inconsistent flash output.

• ตรวจสอบให้แน่ใจว่าแบตเตอรี่ชาร์จหรือเปลี่ยนจนเต็มแล้ว
• ตรวจสอบดูว่ามีสิ่งกีดขวางระหว่างแฟลชกับวัตถุหรือไม่
• Reset flash settings to default.

Issue: Error messages on the flash unit.

• Consult the specific model’s manual for error code meanings.
• ติดต่อฝ่ายสนับสนุนลูกค้าหากปัญหายังคงมีอยู่

การสนับสนุนลูกค้า

• บัญชี WeChat อย่างเป็นทางการ: 2
• โทรศัพท์: +86-755-29609320 (Ext. 8062) / +86-755-25723423
• อีเมล: godox@godox.com
• ที่อยู่: อาคาร 2, เขตอุตสาหกรรมเหยาฉวน, ชุมชน Tangwei, Fuhai Street, Bao'an District, Shenzhen 518103, China

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

สิ่งที่อยู่ข้างใน

armng
• All transport protective materials and packaging on the product must be removed
ก่อนการใช้งาน
• This product is a professional lighting fixture, children are prohibited from using it.
• Do not point the flash directly at the eyes (especially baby’s eyes) under any
สถานการณ์.
• This device is not waterproof. Keep it dry and avoid immersing it in water or other
liquids. It should be installed in a ventilated and dry location and avoid using in rainy,
humid, dusty, or overheated environments. Do not place items above the device or
allow liquids to flow into it to prevent danger.
• Do not use damaged equipment or accessories, and wait for professional
maintenance personnel to check and repair to confirm being normal before use.
• Stop using immediately if the product shell is cracked due to falling, squeezing, or
strong impact, to avoid touching the internal electronic components and getting an
ไฟฟ้าช็อต,
• Please refer to the electronic version of detailed instruction manual for more safety
คำแนะนำ.

ชื่อชิ้นส่วน

1. หัวแฟลช
2. Wide-angle Diffuser
(Transparent, inside the flash head)
3. Catchlight Panel (White, inside
the flash head)
4. LED การสร้างแบบจำลอง Lamp
5. Photocell Sensor
6. แจ็คสายซิงค์
7. IJSB-C Port (Charging/firmware
อัพเกรด)
8. หน้าจอสัมผัส
9. ปุ่มเมนู
10. ปุ่ม SET
11. < > Button
12. เลือก Dial
13. Select Dial Alignment Marker

TTL Wireless Flash Trigger. X5C/X5N/X5S/X5F/X50 (Sold Separately)

Installing the Flash Trigger

Align the flash trigger with the bottom of the flash body in the direction as shown and
place it in, the flash will automatically absorb it. Once installed, the
> icon in the menu interface will light up.

Align the protruding side of the diffuser with the model <iT32> logo side of the flash
body, then insert it firmly until fully seated.

Mounting on the Camera

Rotate clockwise the hot shoe locking ring of the flash trigger to the top and insert
into the hot shoe mount of the camera, then rotate anticlockwise the hot shoe locking
ring until it’s firmly locked.
Note Please make sure the flash and camera are powered off before installing and disassembling.

สวิตซ์ไฟฟ้า
Power on: Press and hold the < > button until the icon appears, then slide up on
the screen or rotate up the select dial to unlock. The device will turn off automatically
if it stays locked for 6 seconds after power on(This function can be turned off in
bootup settings, then press and hold the < > button can directly power on the
อุปกรณ์)
Power off: Press and hold the < fid) > button until the screen blacks out.
The flash trigger X5 does not have power on/off function, users can check its
status via the indicator according to the following table:

Wi-Off Mode Settings

TTL auto flash — adjust the FEC amount
from -3.0 to +3,0 with ± 1/3 increment.
M manual flash — adjust the flash power
from I / 128 to 1/1 with ± I /3 increment.
Multi: stroboscopic flash — number of
flashes (1-100), flash frequency (1-100),
flash output range (1 / 128-1/4), details of
which refer to the electronic version of the
คู่มือการใช้งาน
Sender Mode Settings — Gr [Mul
Gr group setting — press and hold the group
box or SET button to switch among OFF, TTL

M manual flash — receive the M flash
signals from the sender unit.
Multi: stroboscopic flash — receive the
multi flash signals from the sender unit,
2-19
CH25 M
0432 หลาย
+0.3 +
1/16
การถ่ายภาพด้วยแฟลชไร้สาย (2.4G Wireless
การแพร่เชื้อ)
To take wireless flash shooting, you will need one or more flashes that support
wireless transmission in addition to this flash, and you must pair the sender unit and
receiver unit. The group, channel, and ID of the sender unit and receiver unit must
be set to the same. Details of which refer to the electronic version of the instruction