Emaux Water Technology specializes in professional water treatment equipment, including sand filters, pumps, and disinfection systems for swimming pools and spas.
Emaux Water Technology is a global manufacturer widely recognized for its contribution to the swimming pool, spa, and water park industries. With over 40 years of experience, the company designs and produces a comprehensive range of water treatment products, including high-performance filtration systems, pumps, underwater lighting, and disinfection solutions. Their products are engineered for durability and efficiency, catering to both residential and commercial aquatic facilities.
Headquartered with a focus on specialized water technology, Emaux delivers solutions that ensure water quality and system reliability. From robust sand filters to energy-efficient pumps, Emaux products are trusted by pool professionals worldwide for their ease of installation and low maintenance requirements.
คู่มือล่าสุดจาก manuals+ คัดสรรมาเพื่อแบรนด์นี้
คำถามที่พบบ่อยเกี่ยวกับคู่มือ การลงทะเบียน และการสนับสนุนสำหรับแบรนด์นี้
You should backwash the filter when the pressure gauge reading is approximately 1.5 bar (or 20-25 kPa) higher than the initial pressure recorded when the filter sand was clean.
Release all air from the filter and piping system. If the pump is above the water level, fill the trap and pump body with water, tighten the lid by hand, and then start the pump.
The sand surface should be leveled and generally come to about the middle of the filter tank. Always check your specific model's manual for the exact sand quantity required.
This may indicate that the multiport valve spider gasket is damaged or the valve handle is not fully seated in the 'Filter' position. Ensure the handle is locked into place or inspect the gasket.
No. Always turn the pump off before depressing the control valve handle and rotating it to a new position to prevent damage to the valve seal and system components.