1. บทนำ
This manual provides detailed instructions for the ANCEL DS500 Elite Bidirectional Scan Tool and the ANCEL BT310 12V/24V Car Battery Tester. Please read this manual thoroughly before operating the devices to ensure correct usage and optimal performance. Keep this manual for future reference.
2. สินค้าหมดview
2.1 ANCEL DS500 Elite Bidirectional Scan Tool
The ANCEL DS500 Elite is an advanced diagnostic scan tool designed for comprehensive vehicle system analysis. It features bidirectional control capabilities, allowing users to send commands to vehicle modules and monitor system responses. This tool supports full-system deep scans and offers over 3,000 active test commands.
- การควบคุมแบบสองทิศทาง: Perform active tests on various components like fuel pumps, cooling fans, windows, and mirrors.
- Full System Deep Scan: Uncover critical data from every module and sensor, including Engine, ABS, Airbag, Transmission, TPMS, SAS, ESP, BCM, HVAC, EBS, and ACM.
- Hot Reset Service: Access over 28 maintenance reset functions for various car brands, including D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, SAS Calibration, A/F Ratio/Fuel Reset, ABS Bleeding, Air Suspension Reset, NOx Sensor Reset, AFS Reset, ETA Reset, Coolant Pump Activation, Brake-pad Reset, Seat Calibration, and Airbag Reset.
- อัปเดตฟรีตลอดอายุการใช้งาน: Ensures compatibility with evolving vehicle diagnostic systems without subscription fees.
2.2 ANCEL BT310 12V/24V Car Battery Tester
The ANCEL BT310 is a versatile battery load tester compatible with both 12V and 24V battery systems. It supports various battery types and provides accurate health assessments, cranking tests, and charging tests.
- เข้ากันได้สากล: Supports 12V and 24V Lithium and Lead-Acid batteries, including Flooded, AGM (Spiral & Flat Plate), GEL, and EFB types.
- มาตรฐานที่หลากหลาย: Compatible with major battery standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
- Key Diagnostics: Measures State of Charge (SOC), State of Health (SOH), Voltage Test, Rated and Measured CCA, and Internal Resistance.
- ผลการทดสอบ: Provides clear results: [GOOD BATTERY], [GOOD-RECHARGE], [CHARGE & RETEST], [REPLACE BATTERY], and [BAD CELL-REPLACE].
3. การตั้งค่า
3.1 ANCEL DS500 Elite Setup
- เปิดเครื่อง: Connect the DS500 Elite to the vehicle's OBD-II port. The device will power on automatically.
- การกำหนดค่าเริ่มต้น: Follow the on-screen prompts to select language, time zone, and Wi-Fi connection.
- การอัปเดตซอฟต์แวร์: Ensure the device is connected to Wi-Fi and check for available software updates to maintain optimal performance and vehicle compatibility.
3.2 ANCEL BT310 Setup
- เชื่อมต่อกับแบตเตอรี่: Ensure the vehicle engine is off. Connect the red clamp ไปยังขั้วบวก (+) ของแบตเตอรี่และ cl สีดำamp ไปยังขั้วลบ (-)
- เปิดเครื่อง: The BT310 will power on automatically once connected to the battery.
- เลือกประเภทแบตเตอรี่: Use the navigation buttons to select the correct battery type (e.g., Flooded, AGM, GEL, EFB, Lithium) and standard (e.g., CCA, BCI) as prompted on the screen.
4. คู่มือการใช้งาน
4.1 ANCEL DS500 Elite Operation
- การเชื่อมต่อยานพาหนะ: Plug the OBD-II cable into the vehicle's diagnostic port, usually located under the dashboard.
- การระบุยานพาหนะ: The DS500 Elite will automatically detect the vehicle's VIN or prompt you to manually enter vehicle information (make, model, year).
- Diagnostic Menu: Navigate the main menu to select desired functions:
- วินิจฉัย: Perform full system scans, read/clear fault codes, view live data streams, and check I/M readiness.
- ทดสอบการใช้งาน: Select specific control modules and components to perform bidirectional tests (e.g., activate ABS pump, cycle cooling fan).
- บริการ: Access various reset and maintenance functions (e.g., Oil Reset, EPB Reset, SAS Calibration).
- อัปเดต: ตรวจสอบและติดตั้งการอัปเดตซอฟต์แวร์
- ข้อมูล Review: After performing tests, review the diagnostic reports, freeze frame data, and live data graphs on the device screen.
4.2 ANCEL BT310 Operation
- เมนูหลัก: Once powered on, the BT310 will display the main menu with options like 'Battery Test', 'Cranking Test', 'Charging Test', and 'Review Data'.
- การทดสอบแบตเตอรี่: Select 'Battery Test'. The device will prompt you to enter the battery's rated CCA (Cold Cranking Amps) or other standard values. Follow the on-screen instructions. The test will provide results such as SOC, SOH, Voltage, Measured CCA, and Internal Resistance, along with a clear status (e.g., GOOD BATTERY, REPLACE BATTERY).
- การทดสอบการหมุน: Select 'Cranking Test'. The device will instruct you to start the vehicle. It will then measure the cranking voltage and time, providing an assessment of the starter system's performance.
- การทดสอบการชาร์จ: Select 'Charging Test'. The device will instruct you to run the engine at idle and then at a higher RPM (e.g., 2500 RPM). It will measure the alternator's output voltage and ripple, assessing the charging system's efficiency.
- Review ข้อมูล: เลือก 'Review Data' to view ผลการทดสอบที่บันทึกไว้ก่อนหน้านี้
5. การบำรุงรักษา
- การทำความสะอาด: Use a soft, dry cloth to clean the device screens and bodies. Avoid using abrasive cleaners or solvents.
- พื้นที่จัดเก็บ: Store both devices in a dry, cool environment, away from direct sunlight and extreme temperatures.
- การดูแลสายเคเบิล: Inspect cables regularly for any signs of damage. Do not pull on the cables to disconnect them; always grasp the connector.
- Software Updates (DS500 Elite): Regularly check for and install software updates to ensure the scanner has the latest vehicle data and diagnostic capabilities.
6 การแก้ไขปัญหา
- อุปกรณ์ไม่ได้เปิดเครื่อง:
- DS500 Elite: Ensure the OBD-II cable is securely connected to the vehicle's diagnostic port. Check the vehicle's battery for sufficient charge.
- บีที310: ตรวจสอบว่า clamps are correctly connected to the battery terminals (red to positive, black to negative) and that the battery has sufficient voltage.
- Communication Error (DS500 Elite):
- ตรวจสอบว่าระบบจุดระเบิดของรถเปิดอยู่หรือไม่
- Ensure the OBD-II connector is fully seated.
- Verify that the vehicle supports the OBD-II protocol.
- Try testing on a different compatible vehicle to rule out a vehicle-specific issue.
- Inaccurate Battery Test Results (BT310):
- ตรวจสอบให้แน่ใจว่าแบตเตอรี่clamps are clean and have good contact with the battery terminals.
- Verify that the correct battery type and CCA rating were entered into the tester.
- ตรวจสอบให้แน่ใจว่าแบตเตอรี่ชาร์จเต็มก่อนทำการทดสอบ เพื่อให้ได้ผลลัพธ์ที่แม่นยำที่สุด
- Screen Freezes or Device Unresponsive:
- Perform a soft reset by holding the power button (if available) or disconnecting and reconnecting the device.
- If the issue persists, contact ANCEL support.
7. ข้อมูลจำเพาะ
7.1 ANCEL DS500 Elite Bidirectional Scan Tool
- โปรเซสเซอร์: 2.0GHz Cortex-A53 Quad-Core
- ระบบปฏิบัติการ: แอนดรอยด์ 10.0
- หน่วยความจำ: 2GB RAM, ROM 32GB
- แสดง: 7-inch screen, 1024x600 resolution
- แบตเตอรี่: 3150mAh, 3.8V
- การเชื่อมต่อ: Wi-Fi for updates and online support
- ฟังก์ชั่นการวินิจฉัย: Full system diagnostics, bidirectional control, 28+ reset services.
7.2 ANCEL BT310 12V/24V Car Battery Tester
- เล่มที่tagอี ช่วง: 12V และ 24V
- ช่วง CCA: 100-2000 ซีซีเอ
- ประเภทแบตเตอรี่ที่รองรับ: Flooded, AGM (Spiral & Flat Plate), GEL, EFB, Lithium.
- มาตรฐานที่รองรับ: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
- Tests Performed: Battery Health (SOC, SOH, Voltage, Internal Resistance, Rated/Measured CCA), Cranking Test, Charging Test.
8. การรับประกันและการสนับสนุน
The ANCEL DS500 Elite comes with lifetime free software updates, ensuring your tool remains compatible with evolving vehicle diagnostic systems without additional subscription fees. For technical assistance or support, you can easily contact the professional engineering team through the online chat window available on the DS500 Elite device. Feedback can also be provided via the feedback section on the device to help improve services.
