AOOSTAR EG01 OCuLink eGPU Dock Instruction Manual

1. บทนำ

The AOOSTAR EG01 OCuLink eGPU Dock is an external graphics processing unit enclosure designed to enhance the graphical performance of compatible mini-PCs and laptops. It features an OCuLink (PCIe 4.0 x4) interface for high-bandwidth data transfer and supports both ATX and SFX power supplies, offering flexibility for various graphics card configurations. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your eGPU dock.

2. ข้อมูลด้านความปลอดภัย

• คำเตือน: The OCuLink interface does not support hot-plugging. The host machine must be powered off before connecting or disconnecting the OCuLink cable to prevent potential damage to the device or the host.
• Ensure your device has an OCuLink (PCIe 4.0 x4) port before purchasinหรือพยายามเชื่อมต่อ
• Do not support expansion brackets with a width of 3 slots or more due to physical limitations.
• Always handle components with care to avoid electrostatic discharge.

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

• 1 x AOOSTAR EG01 OCuLink eGPU Dock
• 1 x 6-pin to DC cable
• 1 x OCuLink Cable (80CM)
• สกรูสำหรับประกอบ
• คู่มือการใช้งาน

Note: The Graphics Processing Unit (GPU) and Power Supply Unit (PSU) are not included and must be purchased separately.

4. คู่มือการติดตั้ง

4.1. การประกอบเบื้องต้น

The AOOSTAR EG01 dock requires minimal assembly. Follow these steps to prepare your dock:

1. Attach the side brackets to the base panel using the provided screws. Ensure they are securely fastened.
2. If using the detachable multi-functional mount, attach it to the base as desired for stacking a mini-PC.

4.2. การติดตั้งชุดจ่ายไฟ (PSU)

The EG01 supports both ATX and SFX power supplies. Choose a PSU compatible with your graphics card's power requirements.

1. Align your chosen ATX or SFX power supply with the designated mounting holes on the dock's frame.
2. Secure the PSU to the frame using the appropriate screws.
3. Connect the 24-pin power cable from the PSU to the 24-pin port on the dock's circuit board.
4. If powering a mini-PC via the dock's DC output, connect the 6-pin to DC cable from the PSU to the dock's DC input.

Image: AOOSTAR EG01 OCuLink eGPU Dock with an installed power supply and graphics card.

4.3 การติดตั้งหน่วยประมวลผลกราฟิก (GPU)

Install your graphics card into the dock:

1. Carefully remove any protective covers from the graphics card's gold fingers.
2. Align the graphics card with the PCIe slot on the dock's circuit board and firmly insert it until it is fully seated.
3. Secure the graphics card to the dock's frame using the provided screws.
4. Connect the necessary PCIe power cables (e.g., 8-pin or 6+2-pin) from your PSU to the graphics card.

4.4. Connecting to Host Computer

Connect the eGPU dock to your mini-PC or laptop:

1. Ensure your host computer is completely powered off.
2. Connect one end of the OCuLink cable to the OCuLink port on the eGPU dock.
3. Connect the other end of the OCuLink cable to the OCuLink port on your host computer.
4. If using the 6-pin to DC cable to power a mini-PC, connect the DC end to your mini-PC's power input.

4.5. การติดตั้งไดร์เวอร์

Proper drivers are essential for the external GPU to function correctly:

1. Before installing new drivers, it is recommended to uninstall any existing GPU drivers from your host computer using a Display Driver Uninstaller (DDU) tool. Select the GPU device type and the brand of your external GPU (e.g., NVIDIA or AMD), then clean and restart your computer.
2. After restarting, visit the official website of your external GPU's brand (NVIDIA, AMD, or Intel).
3. Navigate to the drivers section and select the desktop version of your graphics card model (not the laptop version).
4. Download and install the corresponding driver package. Follow the on-screen instructions, typically using the default or express installation.
5. After installation, check your Device Manager (under Display Adapters) to confirm that your external GPU is recognized and its model is correctly displayed.

5. คู่มือการใช้งาน

5.1. Power-On Sequence

To properly power on your eGPU setup:

1. First, ensure the external power supply connected to the EG01 dock is switched on.
2. Next, power on your host mini-PC or laptop. The graphics card dock will boot up along with the host.

5.2. OCuLink Interface Usage

The OCuLink interface provides high-speed data transfer for optimal GPU performance. Remember the critical safety warning:

• DO NOT HOT-PLUG OCuLink: Always power off your host computer completely before connecting or disconnecting the OCuLink cable. Failure to do so can result in permanent damage to both the eGPU dock and your host device.
• The power button on the EG01 dock is a non-latching type, designed as a power-off protection mechanism. Pressing it will not cut off the power supply to the graphics card while the host computer is still running. To power off the graphics card, first shut down the mini-PC, then press the switch on the graphics card dock.

6. การบำรุงรักษา

6.1. การทำความสะอาด

Due to its open-air design, the AOOSTAR EG01 dock offers excellent thermal performance but may accumulate dust over time. Regularly clean the graphics card and the dock to maintain optimal airflow and prevent overheating.

• Use compressed air to gently blow away dust from the graphics card fans, heatsinks, and the dock's components.
• Wipe down the exterior surfaces with a soft, dry cloth.
• ตรวจสอบให้แน่ใจว่าอุปกรณ์ปิดอยู่และถอดปลั๊กออกก่อนทำความสะอาด

6.2. การจัดการความร้อน

The open design of the EG01 promotes efficient heat dissipation. Monitor your GPU temperatures during heavy loads to ensure stable performance. If temperatures are consistently high, consider improving ambient airflow or checking for dust buildup.

7 การแก้ไขปัญหา

• Power Supply Test Light Not Lit: If the green test light on the dock's circuit board does not illuminate after connecting the 24-pin power cable and turning on the PSU, it indicates power supply incompatibility. Replace the PSU with a compatible model.
• Graphics Card Not Recognized (Microsoft Basic Display Adapter): This usually indicates a driver mismatch. Follow the driver uninstallation and reinstallation steps in Section 4.5.
• ไม่มีการแสดงผล: Ensure all power cables (24-pin, PCIe to GPU) are securely connected. Verify the OCuLink cable is properly seated and the host computer was powered off during connection. Check monitor connections to the graphics card.
• System Instability/Blue Screens: This can occur if the OCuLink cable is hot-plugged or if there's a driver conflict. Always power off the host before connecting/disconnecting OCuLink. Reinstall GPU drivers if necessary.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AOOSTAR webไซต์ เก็บหลักฐานการซื้อของคุณไว้เพื่อใช้ในกรณีเรียกร้องการรับประกัน