UltraPro 800 Series Z-Wave On/Off Switch Instruction Manual

1. บทนำ

The UltraPro 800 Series Z-Wave On/Off Switch provides smart control for your lights and fixtures. This device integrates into your Z-Wave network, allowing for remote operation, scheduling, and voice control when paired with a compatible smart hub. It supports both Z-Wave Plus Long Range and Z-Wave Classic protocols, offering flexible connectivity options for various home environments.

2. ข้อมูลด้านความปลอดภัย

คำเตือน: มีความเสี่ยงต่อการเกิดไฟฟ้าช็อต This product requires installation involving 120V wiring. Improper installation can result in injury or death. Always consult a qualified electrician if you are unsure about any part of the installation process.

• Turn OFF power at the circuit breaker or fuse box before wiring.
• ตรวจสอบให้แน่ใจว่าการเชื่อมต่อสายไฟทั้งหมดมีความปลอดภัยและมีฉนวนหุ้มอย่างเหมาะสม
• Do not exceed the maximum load ratings for the switch.
• ติดตั้งภายในอาคารเท่านั้น
• Use only copper wire for connections.

3. คุณสมบัติ

• การควบคุมด้วยเสียง: Compatible with Amazon Alexa and Google Assistant (requires Z-Wave certified hub).
• การออกแบบ DIY: QuickFit design with reduced housing depth and color-coded flying leads for easier installation.
• Multi-Switch Capable: Supports single-pole or multi-switch configurations with up to four compatible add-on switches or one standard three-way switch.
• เข้ากันได้สากล: Z-Wave Plus Long Range (up to 1,300ft) and Z-Wave Classic (up to 150ft) for broad network integration.
• การปรับแต่ง: Customizable LED indicator with eight colors and four operation modes.

Image: UltraPro Z-Wave Plus LR Switch highlighting mobile or voice control and scheduling capabilities.

4. การติดตั้ง

4.1 การเดินสายไฟview

The UltraPro Z-Wave switch features color-coded flying leads for simplified wiring. Ensure power is OFF at the circuit breaker before proceeding.

ภาพ: ด้านหน้า view of the UltraPro Z-Wave switch showing wiring connections and product specifications.

4.2 การเดินสายแบบขั้วเดียว

1. ปิดไฟ: Locate the circuit breaker controlling the switch and turn it OFF.
2. ถอดสวิตช์เก่าออก: Unscrew and carefully pull the existing switch from the wall box. Disconnect wires, noting their connections.
3. Connect new switch: Connect the UltraPro switch wires to your home's wiring using wire nuts (not included):
   • Black wire (Line): Connect to the incoming 120V AC hot wire.
   • Red wire (Load): Connect to the wire going to the light fixture or load.
   • White wire (Neutral): Connect to the neutral wire bundle (usually white).
   • Green wire (Ground): Connect to the bare copper or green ground wire.
   • Note: The yellow wire is for 3-way/multi-switch configurations only. Insulate if not used.
4. สวิตช์ติดตั้ง: Carefully push the wired switch back into the wall box. Secure it with screws.
5. Install wallplate: Attach your desired wallplate (sold separately).
6. คืนพลังงาน: Turn the circuit breaker back ON.

4.3 3-Way / Multi-Switch Wiring

This switch supports direct 3-way wiring without needing an add-on switch, or can be used with up to four UltraPro add-on switches. For direct 3-way, the yellow traveler wire is used. Refer to the detailed wiring diagrams provided with your product packaging or on the manufacturer's website for specific multi-switch configurations.

สำคัญ: In a 3-way setup, ensure that the switch location where the UltraPro Z-Wave switch is installed has a constant hot line, a load wire, and a neutral wire. The yellow wire from the UltraPro switch connects to the traveler wire that goes to the other standard 3-way switch. The other standard 3-way switch will then control the power to the yellow traveler wire.

5. Setup and Pairing (Z-Wave Inclusion)

To integrate your UltraPro Z-Wave switch into your smart home system, you must pair it with a compatible Z-Wave certified hub.

1. Prepare your hub: Follow your Z-Wave hub's instructions to enter inclusion (pairing) mode. This is often referred to as "Add Device" or "Discover Device."
2. Initiate pairing on switch: Press the top or bottom of the paddle switch once. The LED indicator will flash to confirm inclusion mode.
3. Confirm pairing: Your hub should confirm the device has been added. The switch's LED will stop flashing and return to its normal state.
4. ตั้งชื่ออุปกรณ์: Assign a name to your switch within your hub's interface (e.g., "Kitchen Light").

5.1 Z-Wave Exclusion (Removing from Network)

To remove the switch from your Z-Wave network:

1. Prepare your hub: Follow your Z-Wave hub's instructions to enter exclusion (removal) mode. This is often referred to as "Remove Device" or "Exclude Device."
2. Initiate exclusion on switch: Press the top or bottom of the paddle switch once. The LED indicator will flash to confirm exclusion mode.
3. Confirm exclusion: Your hub should confirm the device has been removed. The switch's LED will stop flashing.

5.2 การตั้งค่าการควบคุมด้วยเสียง

Once paired with a compatible Z-Wave hub (e.g., SmartThings, Ring Alarm) that supports Amazon Alexa or Google Assistant integration, you can enable voice control:

1. Link accounts: In your Alexa or Google Home app, link your Z-Wave hub account.
2. ค้นพบอุปกรณ์: Ask your voice assistant to "Discover devices" or use the app to initiate discovery.
3. ควบคุม: You can now use voice commands like "Alexa, turn on Kitchen Light" or "Hey Google, turn off Living Room Fan."

Image: A family in a kitchen, demonstrating voice control functionality with Amazon Alexa and Google Home compatibility.

6. การดำเนินการ

6.1 การควบคุมด้วยตนเอง

• บน: Press the top of the paddle switch to turn the connected load ON.
• ปิด: Press the bottom of the paddle switch to turn the connected load OFF.

6.2 Remote Control and Scheduling

Once paired with your Z-Wave hub, you can control the switch remotely via your hub's mobile application. This allows you to turn lights ON/OFF from anywhere and set up schedules for automated operation.

Image: A person using a mobile device to schedule and control home lighting remotely.

6.3 LED Indicator Customization

The switch features a customizable LED indicator. Refer to your Z-Wave hub's advanced settings or the UltraPro support documentation for instructions on how to change the LED color and operation mode (e.g., always ON, always OFF, ON when load is OFF, ON when load is ON).

7. การบำรุงรักษา

The UltraPro Z-Wave switch requires minimal maintenance. To clean, wipe with a soft, dry cloth. Do not use liquid cleaners or sprays directly on the switch.

8 การแก้ไขปัญหา

• สวิตช์ไม่ตอบสนอง: Ensure power is ON at the circuit breaker. Check wiring connections. Try re-pairing the switch with your Z-Wave hub.
• Cannot pair with hub: Ensure your hub is in inclusion mode. Move the switch closer to the hub if range is an issue (especially for Z-Wave Classic). Perform a factory reset on the switch (refer to manufacturer's website for specific steps, usually involves a sequence of button presses).
• Lights flicker or do not turn on/off correctly: Verify the load connected to the switch does not exceed the maximum rating (15A resistive, 10A incandescent, 1/2 HP motor). Ensure proper wiring, especially for 3-way configurations.
• ติดตั้งในกล่องติดผนังได้ยาก: The QuickFit design reduces housing depth. Ensure sufficient space for wiring and wire nuts.

9. ข้อมูลจำเพาะ

Image: UltraPro Z-Wave switch showing physical dimensions and LED indicator information.

10. การรับประกันและการสนับสนุน

For warranty information or technical support, please visit the UltraPro website or contact Jasco Products Company, LLC directly. Keep your purchase receipt for warranty claims.

ข้อมูลติดต่อ:

• Web: byjasco.com/support
• โทรศัพท์: โปรดดูข้อมูลจากผู้ผลิต website for current support numbers.