การแนะนำ
This instruction manual provides essential information for the safe and proper handling, installation, and maintenance of the Bertazzoni 606094 Oven Bake Element. This component is an original equipment manufacturer (OEM) part designed for specific Bertazzoni oven models, including BAF91EG, BAF92EG, and BAF91.1EG. Please read this manual thoroughly before attempting any installation or service.
เก็บคู่มือนี้ไว้เพื่อใช้อ้างอิงในอนาคต
สินค้าเกินview
The Bertazzoni 606094 Oven Bake Element is a critical heating component located at the bottom of the oven cavity. Its primary function is to generate heat for baking and roasting, ensuring even temperature distribution within the oven.
This image displays the Bertazzoni 606094 Oven Bake Element. It is a black, U-shaped heating element designed for the bottom of an oven cavity. The element features two electrical terminals at its base for connection to the oven's power supply, and a thin metal support rod running horizontally across its width.
การติดตั้งและการตั้งค่า
WARNING: Before attempting any installation or repair, ensure the oven's power supply is completely disconnected at the circuit breaker to prevent electric shock. It is recommended that installation be performed by a qualified technician.
- ความปลอดภัยเป็นสิ่งสำคัญที่สุด: Disconnect the oven from its power source by turning off the circuit breaker or unplugging the appliance.
- เข้าถึงองค์ประกอบ: Open the oven door and locate the bake element at the bottom of the oven cavity. Depending on the oven model, you may need to remove oven racks or a bottom panel to access the element.
- การตัดสายไฟ: Carefully pull the element forward slightly to expose the electrical terminals at the back. Note the position of the wires connected to the terminals. It is advisable to take a photograph for reference. Disconnect the wires from the old element.
- ลบองค์ประกอบเก่า: Unscrew any mounting screws holding the element in place. Gently slide the old element out of the oven cavity.
- ติดตั้งองค์ประกอบใหม่: Carefully insert the new Bertazzoni 606094 bake element into the oven cavity, ensuring it aligns with the mounting holes.
- เชื่อมต่อสายไฟใหม่: Connect the electrical wires to the terminals of the new element, ensuring they are securely attached in their original positions.
- องค์ประกอบที่ปลอดภัย: Fasten the new element with the mounting screws. Ensure it is firmly in place and does not wobble.
- คืนค่าพลัง: Close the oven door. Restore power to the oven at the circuit breaker.
- ทดสอบฟังก์ชันการทำงาน: Turn on the oven to a bake setting and observe if the element heats up properly.
การทำงาน
The Bertazzoni 606094 Oven Bake Element is a passive component that functions as part of the oven's heating system. Once installed and connected to the oven's electrical system, it receives power when the oven is set to a bake or roast function, converting electrical energy into radiant heat. This heat is then distributed throughout the oven cavity to cook food.
การซ่อมบำรุง
Proper maintenance can extend the lifespan of your oven's components. For the bake element:
- การทำความสะอาด: Ensure the oven is cool and disconnected from power before cleaning. Gently wipe the element with a soft, damp cloth to remove any food spills or residue. Avoid using abrasive cleaners, metal scouring pads, or harsh chemicals, as these can damage the element's surface.
- การตรวจสอบ: Periodically inspect the element for any visible signs of damage, such as cracks, blisters, or discoloration. If any damage is observed, the element may need replacement.
- หลีกเลี่ยงผลกระทบ: Be careful not to strike the element with cookware or other objects, as this can cause damage.
การแก้ไขปัญหา
If your oven is not heating correctly after element replacement, consider the following common issues:
- เตาอบไม่ร้อน:
- ไม่มีไฟฟ้า: Check if the oven is properly plugged in and the circuit breaker has not tripped.
- การเดินสายไฟไม่ถูกต้อง: Verify that the electrical wires are securely connected to the element terminals in the correct configuration.
- Faulty Element (Rare for New): Although rare for a new part, inspect the element for any visible defects.
- การให้ความร้อนที่ไม่สม่ำเสมอ:
- Element Not Fully Functional: If only parts of the element glow or heat, it may indicate an internal fault.
- ส่วนประกอบอื่นๆ ของเตาอบ: Uneven heating can also be caused by issues with the oven's thermostat or temperature sensor, which are separate from the bake element.
หากขั้นตอนการแก้ไขปัญหาไม่สามารถแก้ไขปัญหาได้ ขอแนะนำให้ติดต่อช่างซ่อมเครื่องใช้ไฟฟ้าที่มีคุณสมบัติเหมาะสม
ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| หมายเลขชิ้นส่วน | 606094 (TYUA-EA7927) |
| หมายเลขรุ่นสินค้า | 606094 |
| Compatible Oven Models | BAF91EG, BAF92EG, BAF91.1EG |
| น้ำหนักสินค้า | 1.6 ปอนด์ |
| ขนาดสินค้า | 0.1 x 0.1 x 0.1 นิ้ว (Note: These dimensions appear to be placeholder/packaging dimensions and not the actual element size.) |
| ส่วนประกอบที่รวมอยู่ | องค์ประกอบ |
| ผู้ผลิต | TYGH |
ข้อมูลการรับประกัน
Warranty coverage for the Bertazzoni 606094 Oven Bake Element is typically provided by the seller or the original equipment manufacturer. Please refer to your purchase documentation or contact the seller directly for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
สนับสนุน
For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact the retailer from whom you purchased the element or a certified appliance repair professional. Do not attempt repairs that are beyond your technical capabilities.
