Berrcom Thermometer Instruction Manual

1. บทนำ

This manual provides detailed instructions for the safe and effective use of your Berrcom ET003 Forehead and Ear Thermometer and Berrcom JXB-178 Forehead Thermometer. Please read this manual thoroughly before using the devices and retain it for future reference. These thermometers are designed for accurate temperature measurement for individuals of all ages.

Image: The Berrcom ET003 thermometer in use, demonstrating its application for infants.

2. ข้อมูลด้านความปลอดภัยที่สำคัญ

• อย่าพยายามถอดประกอบหรือซ่อมแซมเทอร์โมมิเตอร์
• เก็บอุปกรณ์ให้พ้นมือเด็ก ชิ้นส่วนเล็กๆ อาจเป็นอันตรายจากการสำลักได้
• Avoid direct sunlight and keep the thermometer away from dust, dirt, and extreme temperatures.
• อย่าจุ่มเทอร์โมมิเตอร์ลงในน้ำหรือของเหลวอื่นๆ
• Consult a physician if you have concerns about temperature readings or health conditions.
• The thermometer is not a substitute for medical consultation.

3. Berrcom ET003 Forehead and Ear Thermometer

3.1. คุณสมบัติของผลิตภัณฑ์

• Dual mode: Forehead and Ear temperature measurement.
• Suitable for infants, children, and adults.
• Quick 1-second measurement.
• Celsius (℃) and Fahrenheit (℉) switchable.
• Automatic shut-off after 30 seconds to conserve battery.
• Fever warning system with short beep and red backlight for high temperatures.
• Memory function to recall previous readings.

Image: The Berrcom ET003 thermometer, illustrating its design for both forehead and ear measurements.

3.2. การติดตั้งแบตเตอรี่

1. Open the battery cover located at the bottom of the thermometer.
2. ใส่แบตเตอรี่ AAA สองก้อน โดยตรวจสอบให้แน่ใจว่าขั้วถูกต้อง (+/-)
3. ปิดฝาครอบแบตเตอรี่ให้แน่น

3.3. Operating Instructions (ET003)

3.3.1. Forehead Measurement

1. Ensure the probe cover is attached for forehead mode.
2. Press the 'START' button to turn on the thermometer.
3. Position the thermometer probe at the center of the forehead, approximately 1-2 inches away.
4. Press the 'START' button again. The reading will appear on the display within 1 second.

Image: Proper technique for taking a forehead temperature reading with the ET003 thermometer.

3.3.2. Ear Measurement

1. Remove the probe cover to expose the ear probe.
2. Press the 'START' button to turn on the thermometer.
3. Gently insert the probe into the ear canal. For children under 1 year, gently pull the ear straight back. For children over 1 year and adults, gently pull the ear up and back.
4. Press the 'START' button again. The reading will appear on the display within 1 second.

Image: Correct method for taking an ear temperature reading with the ET003 thermometer.

3.3.3. Temperature Unit Switching (℃/℉)

With the device turned off, press and hold the 'MOD' button for approximately 3 seconds. The display will show the current unit, then switch to the other unit. Release the button to select the desired unit.

Image: Visual representation of switching between Celsius and Fahrenheit temperature units on the ET003.

3.3.4. Fever Alarm

The ET003 thermometer features a fever alarm. If the measured temperature exceeds the normal range, the device will emit a short beep, and the screen backlight will turn red, indicating a potential fever.

4. Berrcom JXB-178 Forehead Thermometer

4.1. คุณสมบัติของผลิตภัณฑ์

• 3-in-1 functionality: Measures body, object (milk, food), and room temperature.
• Non-contact infrared measurement.
• Backlit LCD display for clear readings, even at night.
• Memory function stores the last 32 temperature measurements.
• Celsius (℃) and Fahrenheit (℉) switchable.
• Automatic shut-off after 30 seconds to conserve battery.
• Fever alarm with color-coded backlight (green, orange, red).

Image: The Berrcom JXB-178 thermometer and its retail packaging.

4.2. การติดตั้งแบตเตอรี่

1. Open the battery compartment cover on the handle.
2. ใส่แบตเตอรี่ AAA สองก้อน โดยสังเกตขั้วที่ถูกต้อง (+/-)
3. ปิดฝาช่องใส่แบตเตอรี่ให้สนิท

4.3. Operating Instructions (JXB-178)

4.3.1. Body Temperature Measurement

1. Press the 'MODE' button to ensure the thermometer is in 'Body' mode.
2. Point the thermometer at the center of the forehead, approximately 0.3-1.5 inches (1-3 cm) away.
3. Press the measurement button (trigger). The temperature reading will display instantly.

Image: The JXB-178 thermometer being used for a non-contact forehead temperature reading on a sleeping child, highlighting its clear backlit display.

4.3.2. Object/Room Temperature Measurement

1. Press the 'MODE' button to switch to 'Object' or 'Room' mode.
2. Point the thermometer at the object or area you wish to measure.
3. Press the measurement button (trigger). The temperature reading will display.

4.3.3. Temperature Unit Switching (℃/℉)

With the thermometer turned on, press and hold the 'MODE' button for a few seconds until the unit changes on the display. Release the button to set the desired unit.

4.3.4. ฟังก์ชั่นหน่วยความจำ

The JXB-178 automatically stores the last 32 temperature readings. To access memory, press the 'MEM' button. Repeated presses will cycle through stored readings.

4.3.5. Fever Alarm and Backlight

The JXB-178 uses a three-color backlight system to indicate temperature status:

• สีเขียว: อุณหภูมิปกติ
• ส้ม: Slight fever.
• สีแดง: High fever, accompanied by an audible alarm.

Image: The JXB-178's three-color backlight system indicating temperature status.

4.3.6. Mute/Unmute Mode

The JXB-178 may feature a mute function. Refer to the specific device's buttons for a speaker icon or a dedicated mute button to toggle sound on or off, useful for quiet environments like a sleeping child's room.

5. การดูแลรักษา

• การทำความสะอาดโพรบ: Use a cotton swab or soft cloth moistened with alcohol (70% isopropyl) to gently clean the thermometer probe after each use. Allow it to air dry completely.
• ทำความสะอาดร่างกาย: Wipe the thermometer body with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• พื้นที่จัดเก็บ: Store the thermometer in a cool, dry place, away from direct sunlight, dust, and extreme temperatures. If not in use for an extended period, remove the batteries to prevent leakage.
• การเปลี่ยนแบตเตอรี่: เปลี่ยนแบตเตอรี่เมื่อไฟแสดงสถานะแบตเตอรี่ต่ำปรากฏขึ้นบนหน้าจอแสดงผล ทิ้งแบตเตอรี่ที่ใช้แล้วตามข้อกำหนดของท้องถิ่น

6. คำแนะนำการแก้ไขปัญหา

7. ข้อมูลจำเพาะ

7.1. Berrcom ET003

• Measurement Range: Body Mode: 32.0℃-42.9℃ (89.6℉-109.2℉)
• Accuracy: ±0.2℃ (±0.4℉)
• Display Resolution: 0.1℃ (0.1℉)
• Operating Conditions: 10℃-40℃ (50℉-104℉), Humidity ≤85% RH
• Power Supply: DC 3V (2 x AAA batteries)
• Automatic Shut-off: Approximately 30 seconds

7.2. Berrcom JXB-178

• Measurement Range: Body Mode: 32.0℃-42.9℃ (89.6℉-109.2℉); Object Mode: 0℃-100℃ (32℉-212℉)
• Accuracy: ±0.2℃ (±0.4℉) for Body Mode; ±1.0℃ (±1.8℉) for Object Mode
• Display Resolution: 0.1℃ (0.1℉)
• Operating Conditions: 10℃-40℃ (50℉-104℉), Humidity ≤85% RH
• Power Supply: DC 3V (2 x AAA batteries)
• Automatic Shut-off: Approximately 30 seconds

8. การรับประกันและการสนับสนุน

Berrcom products are manufactured under strict quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Berrcom webไซต์ กรุณาเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ

ภาพ: อดีตample of what is included in the product box, such as the thermometer, manual, and batteries.