Figure 1: HZXVOGEN MIG250DP Multi-Process Welder Overview - Showcasinคุณสมบัติหลักและการออกแบบ
1. ข้อมูลด้านความปลอดภัยที่สำคัญ
Welding operations involve inherent risks. Always prioritize safety to prevent injury or damage. Read and understand all safety warnings and instructions before operating the HZXVOGEN MIG250DP welder.
- ไฟฟ้าช็อต: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure proper grounding.
- ควันและก๊าซ: Can be hazardous to your health. Keep your head out of the fumes. Use adequate ventilation or exhaust at the arc.
- รังสีอาร์ค: Can injure eyes and burn skin. Wear a welding helmet with a proper shade filter and protective clothing.
- ไฟและการระเบิด: Welding sparks and hot metal can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- แผลไหม้: Hot metal can cause severe burns. Do not touch hot parts with bare hands.
- สนามแม่เหล็กไฟฟ้า (EMF): May interfere with pacemakers. Consult your doctor before welding.
The HZXVOGEN MIG250DP includes safety features such as a Voltage Reduction Device (VRD) and protection against overvoltage, overcurrent, overload, and overheating. However, these features do not replace proper safety practices.
Figure 2: Welder Safety Features - Illustrates the various protection systems integrated into the HZXVOGEN MIG250DP, including overcurrent, overvoltage, overheat, overload, electrostatic discharge protection, and IP21 waterproofing.
2. สินค้าหมดview
The HZXVOGEN MIG250DP is a versatile 6-in-1 multi-process inverter welding machine designed for various welding applications. It combines advanced digital control with robust safety features to deliver stable and precise welding performance.
2.1 คุณสมบัติหลัก
- 6-in-1 Welding Capability: Supports MIG Gas, Flux Core MIG, Pulsed MIG, Lift TIG, Stick (MMA), and Aluminum welding.
- Enhanced Power and Reliability: Features a fully digital microcontroller and highly integrated circuit for stable and consistent welding results.
- Advanced Synergic Control: Automatically adjusts welding parameters for optimal performance across different materials like carbon steel, stainless steel, and thicker steel.
- Optimized Welds: Compensates for mains voltage fluctuations, reducing spatter, increasing penetration, and ensuring consistent wire feed.
- ความปลอดภัยที่ครอบคลุม: Equipped with Voltage Reduction Device (VRD) and protection against overvoltage, overcurrent, overload, and overheating. Features a unique cooling system for extended operation.
- ฉบับคู่tagอีอินพุต: Compatible with both 110V and 220V power supplies.
Figure 3: Multi-Process Welding Modes - Displays the various welding processes supported by the MIG250DP, including Gas MIG, Flux Core MIG, Stick, Lift TIG, and Pulse MIG for aluminum.
2.2 เนื้อหาบรรจุภัณฑ์
The HZXVOGEN MIG250DP package typically includes the following items:
- ไฟฉาย MIG
- กราวด์Clamp
- คู่มือการใช้งาน (เอกสารนี้)
- ท่อแก๊ส
- ท่อ Clamp
- ที่จับอิเล็กโทรด
- Brush Hammer
- Demolition Wrench
- Conductive Nozzle
- 0.8 mm Welding Wire
- ล้อลวด
- Graphene Tube
- 110V-220V Adapter
Figure 4: Included Accessories - A visual representation of the components supplied with the HZXVOGEN MIG250DP welding machine.
3. การตั้งค่าและการติดตั้ง
การตั้งค่าที่ถูกต้องเป็นสิ่งสำคัญอย่างยิ่งสำหรับการเชื่อมที่ปลอดภัยและมีประสิทธิภาพ โปรดปฏิบัติตามขั้นตอนเหล่านี้อย่างระมัดระวัง
3.1 การเชื่อมต่อสายไฟ
- Ensure the welder's power switch is in the "OFF" position.
- Connect the power cord to a suitable 110V or 220V power outlet. The machine is designed for dual voltagอีอินพุต
- Verify that the power source meets the welder's requirements.
3.2 การติดตั้งม้วนลวด (MIG/Flux Core)
- Open the side panel of the welder to access the wire feed mechanism.
- Place the wire spool onto the spool holder. Ensure it rotates freely.
- Thread the welding wire through the guide tube and into the drive roller groove.
- Close the drive roller tension arm and adjust the tension knob. The tension should be sufficient to feed the wire without slipping, but not so tight as to deform the wire.
- Ensure the correct drive roller size (e.g., 0.8mm, 1.0mm) is selected for your wire diameter.
Figure 5: Smooth Wire Feed System - Details the internal components for wire spool installation and feeding, emphasizing ease of setup.
Figure 6: Wire Feeding Mechanism - Shows the process of installing welding wire and ensuring smooth operation through the drive rollers.
3.3 คบเพลิงและสายดินamp การเชื่อมต่อ
- Connect the MIG torch to the appropriate connector on the front panel. Ensure it is securely tightened.
- ต่อสายดิน clamp cable to the designated terminal (usually negative for MIG/Flux Core, positive for Stick).
- ติดกราวด์ clamp firmly to the workpiece or welding table, ensuring good electrical contact.
3.4 Gas Connection (for MIG Gas Welding)
- Connect one end of the gas hose to the gas inlet on the rear of the welder.
- Connect the other end of the gas hose to your gas cylinder regulator.
- Ensure all connections are tight to prevent gas leaks. Open the gas cylinder valve slowly.
4. คู่มือการใช้งาน
The HZXVOGEN MIG250DP offers multiple welding modes. Select the appropriate mode and adjust parameters according to your welding task.
4.1 แผงควบคุมโอเวอร์view
The welder features a large LED display and intuitive controls for mode selection and parameter adjustment.
Figure 7: Large LED Display - Provides clear digital readouts and indicators for selected welding modes and parameters.
Figure 8: Digital Control Interface - Highlights the precision and clarity of the digital display for setting welding parameters.
4.2 Mode Selection and Parameter Adjustment
- Turn on the welder using the power switch.
- Use the "Multi-function" or "Selection" buttons to cycle through the available welding modes (MIG Gas, Flux Core, Pulse, Lift TIG, MMA).
- In Synergic mode (SYN), simply select the current, and the machine will automatically match the voltage เพื่อผลลัพธ์ที่ดีที่สุด
- For experienced users, the voltage compensation feature allows for precise manual adjustment of voltage.
Figure 9: Synergic Mode Operation - Explains how the synergistic control simplifies parameter setting for beginners and offers fine-tuning for advanced users.
4.3 Welding Process Guidelines
Refer to the following table for recommended settings based on material thickness and welding process. These are starting points and may require fine-tuning.
Figure 10: Welding Parameter Chart - Provides a guide for selecting appropriate wire diameter and current for different materials and welding processes.
4.3.1 MIG Welding (Gas/Flux Core/Pulse)
- Select the desired MIG mode (Gas, Flux Core, or Pulse).
- Adjust wire feed speed and voltage according to the material and thickness, or use Synergic mode.
- For Gas MIG, ensure gas flow is set correctly (e.g., 10-15 L/min for CO2 or Argon/CO2 mix).
- For Pulsed MIG (especially for aluminum), ensure the correct aluminum wire (e.g., 1.0mm/1.2mm) and a suitable spool gun are used.
Figure 11: Precision Welding Examples - Illustrates the quality of welds on different materials, including aluminum and mild steel.
Figure 12: Single Pulse Aluminum Welding - Shows the machine's capability for specialized aluminum welding with pulsed MIG.
4.3.2 Stick (MMA) Welding
- Connect the electrode holder to the positive (+) terminal and the ground clamp ไปยังขั้วลบ (-)
- Select MMA mode.
- ใส่ขั้วไฟฟ้าที่เหมาะสมลงในตัวยึด
- Adjust the current based on the electrode type and material thickness.
4.3.3 Lift TIG Welding
- Connect a TIG torch (not included) to the appropriate terminal.
- ต่อสายดิน clamp สู่ชิ้นงาน
- Select Lift TIG mode.
- Adjust the current. Initiate the arc by gently touching the tungsten electrode to the workpiece and lifting it slightly.
Figure 13: Connection Setups for Various Modes - Illustrates how to connect accessories for Gas MIG, Flux Core MIG, Stick, and Lift TIG welding.
5. การบำรุงรักษา
Regular maintenance ensures the longevity and optimal performance of your HZXVOGEN MIG250DP welder.
- การทำความสะอาด: Regularly clean the internal components, especially the fan and heat sinks, to prevent dust buildup and ensure efficient cooling. Use compressed air.
- ระบบป้อนลวด: Inspect the drive rollers and liner for wear or debris. Clean or replace as necessary to ensure smooth wire feeding.
- Torch and Cables: Check the MIG torch, ground clamp, and electrode holder cables for damage, cuts, or loose connections. Replace damaged parts immediately.
- Contact Tips and Nozzles: Replace worn contact tips and clean welding nozzles regularly to maintain arc stability and weld quality.
- พื้นที่จัดเก็บ: Store the welder in a clean, dry environment when not in use.
Figure 14: Internal Cooling System and Protection - Shows the internal components and cooling fan, emphasizing the importance of keeping them clear for optimal performance and highlighting integrated safety features.
6 การแก้ไขปัญหา
This section provides solutions to common issues you might encounter. For problems not listed here, contact HZXVOGEN customer support.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| No power to the welder | Power switch off, loose power cord, tripped circuit breaker. | Ensure power switch is ON. Check power cord connection. Reset circuit breaker. |
| No arc / Weak arc | Poor ground connection, incorrect settings, worn contact tip, wrong wire size. | ตรวจสอบให้แน่ใจว่าพื้นดินสะอาดamp is secure. Adjust current/voltage. Replace contact tip. Verify correct wire size. |
| Wire not feeding smoothly | Incorrect drive roller tension, clogged liner, tangled wire spool, wrong drive roller size. | Adjust drive roller tension. Clean or replace liner. Untangle wire. Ensure correct drive roller size. |
| กระเด็นมากเกินไป | ปริมาตรไม่ถูกต้องtage/wire feed speed, improper stick-out, dirty workpiece. | Adjust settings. Maintain proper stick-out. Clean workpiece thoroughly. |
| Overheat indicator active | Exceeded duty cycle, blocked cooling vents, high ambient temperature. | Allow welder to cool down. Ensure clear airflow to vents. Reduce welding time. |
7. ข้อมูลจำเพาะ
| คุณสมบัติ | รายละเอียด |
|---|---|
| ยี่ห้อ | HZXVOGEN |
| แบบอย่าง | MIG250DP |
| ขนาดสินค้า (กว้าง x ยาว x สูง) | 45 x 28 x 29 ซม. |
| น้ำหนัก | 11.8 กก. |
| อินพุต Voltage | 230 โวลต์ (แรงดันไฟฟ้าคู่tage 110V/220V compatible) |
| กระบวนการเชื่อม | MIG Gas, Flux Core MIG, Pulsed MIG, Lift TIG, Stick (MMA), Aluminum Welding |
| แม็กซ์กระแสไฟขาออก | 250 ก |
| Wire Diameter Compatibility | Flux-cored: 0.8mm / 1.0mm; Aluminum: 1.0mm / 1.2mm |
| คุณสมบัติด้านความปลอดภัย | VRD, Overvoltage, Overcurrent, Overload, Overheating, Electrostatic Protection, IP21 |
Figure 15: Portable and Lightweight Design - Highlights the compact dimensions and manageable weight of the welder.
8. วิดีโอผลิตภัณฑ์อย่างเป็นทางการ
No official product videos specifically for the HZXVOGEN MIG250DP model were available from the seller in the provided data. Please refer to the written instructions and diagrams for guidance.
9. การรับประกันและการสนับสนุน
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official HZXVOGEN webไซต์นี้ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ยืนยันการรับประกัน
