BONTEC Single Monitor Arm (Model GDM7505-FBA) Instruction Manual

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of your BONTEC Single Monitor Arm, Model GDM7505-FBA. Designed for 15-34 inch screens weighing up to 26.5 lbs, this ergonomic gas spring monitor mount offers full motion adjustability, including tilt, swivel, and rotation, along with VESA compatibility (75x75mm and 100x100mm). Please read this manual thoroughly before installation and use to ensure proper setup and safe operation.

Image: The BONTEC Single Monitor Arm, showcasing its design and the two available mounting options (C-clamp and grommet base).

ข้อมูลด้านความปลอดภัยที่สำคัญ

• ตรวจสอบให้แน่ใจว่าพื้นโต๊ะของคุณแข็งแรงพอที่จะรองรับน้ำหนักรวมของแขนยึดจอภาพและจอภาพได้
• ห้ามเกินขีดจำกัดน้ำหนักสูงสุดที่สามารถรองรับได้ 26.5 ปอนด์ (12 กก.)
• Verify that your monitor is VESA compatible (75x75mm or 100x100mm) before installation.
• Always follow the assembly instructions carefully. Incorrect installation may result in product damage or personal injury.
• เก็บให้ห่างจากเด็กและสัตว์เลี้ยงในระหว่างการติดตั้ง
• Do not use power tools to tighten screws when attaching the VESA plate to the monitor, as this may damage the monitor. Hand-tighten only.
• Adjust the gas spring tension only after the monitor is mounted to prevent the arm from springing up or down unexpectedly.

เนื้อหาแพ็คเกจ

Please check that all components are present and undamaged before proceeding with installation. Refer to the assembly video for a visual guide to the parts.

The package should include the following main components and hardware:

• Monitor Arm Assembly (A)
• แขนท่อนล่าง (B)
• ฐาน (C)
• ซี-ซีแอลamp (ง)
• Brace for C-clamp (จ)
• Screws for C-clamp (ฉ)
• Wingnut (G)
• Carriage Bolt (H)
• Allen Keys (I, J, K)
• Monitor Mounting Screws (M-A, M-B, M-C, M-D, M-E) and Washers (M-C)

การติดตั้งและการตั้งค่า

ขั้นตอนที่ 1: เลือกวิธีการติดตั้งของคุณ

The BONTEC Monitor Arm supports two installation methods: C-clamp mounting and Grommet mounting. Select the method suitable for your desk.

Image: Visual representation of the C-clamp mounting and grommet mounting options, including desk thickness and hole diameter requirements.

1A. C-clamp การติดตั้ง

1. Attach the Brace (E) to the Base (C) using the provided screws (F).
2. Position the assembled C-clamp (D) onto your desk edge. Ensure the desk thickness is between 0.39 and 3.15 inches (10-80mm).
3. กระชับ C-clamp securely to the desk using the Allen key.

1B. Grommet Base Installation

1. Remove the clip plate from the clamp (D) if it's attached.
2. Insert the Carriage Bolt (H) through the Base (C) and then through the grommet hole in your desk. Ensure the desk thickness is between 0.39 and 2.76 inches (10-70mm) and the hole diameter is between 0.39 and 2.36 inches (10-60mm).
3. Secure the base from underneath the desk using the clip plate and Wingnut (G).

Step 2: Install the Arm onto the Base

Slide the lower arm (B) onto the pole of the installed base. Then, slide the main monitor arm assembly (A) onto the lower arm. Secure both arms by tightening the set screws with the appropriate Allen key.

ขั้นตอนที่ 3: ติดแผ่น VESA เข้ากับจอภาพ

Carefully attach the VESA plate of the monitor arm to the back of your monitor. Use the appropriate screws (M-A/M-B or M-C/M-D/M-E) and washers (M-C) that fit your monitor's VESA mounting holes. Ensure the screws are inserted loosely, leaving a 3-4mm gap, before hanging the monitor onto the arm. ห้ามใช้เครื่องมือไฟฟ้า for this step to avoid damaging your monitor.

Step 4: Manage Cables

Route your monitor's power and video cables through the integrated cable management channels on the monitor arm. This helps maintain a clean and organized workspace.

การใช้งานและการปรับแต่ง

The BONTEC Single Monitor Arm offers extensive adjustability for optimal viewing comfort. Adjustments include tilt, swivel, rotation, and gas spring tension.

การปรับความเอียง

The monitor arm allows for a tilt range of +85° to -50°. If the monitor head is dropping down or is too loose, tighten the screw on the tilt mechanism clockwise using the appropriate Allen key until the desired tension is achieved. If it's too stiff, loosen it counter-clockwise.

การปรับหมุน

The monitor can swivel ±90° at the VESA plate connection. If the monitor is too sensitive or moves too freely, tighten the screw on the swivel joint clockwise with the Allen key to increase resistance. If it's too stiff, loosen it counter-clockwise.

การปรับการหมุน

The monitor can rotate 360° from landscape to portrait orientation. The base and arm joints also offer 360° rotation for flexible positioning.

Image: Diagram illustrating the full motion capabilities of the monitor arm, including tilt (+85°/-50°), swivel (±90°), and 360° rotation.

การปรับความตึงสปริงแก๊ส

The gas spring tension needs to be adjusted according to your monitor's weight to ensure it stays balanced at any height.

• If the monitor is drooping or falling, turn the tension screw ทวนเข็มนาฬิกา to increase tension (up to 20 turns maximum).
• If the monitor is rising too easily or springing up, turn the tension screw ตามเข็มนาฬิกา to reduce tension (up to 20 turns maximum).

การซ่อมบำรุง

• ตรวจสอบสกรูและจุดเชื่อมต่อทั้งหมดอย่างสม่ำเสมอเพื่อให้แน่ใจว่าแน่นหนาดีแล้ว
• ทำความสะอาดขาตั้งจอภาพด้วยผ้าเนื้อนุ่มและแห้งamp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดหรือตัวทำละลายที่มีฤทธิ์กัดกร่อน
• Do not disassemble the gas spring cylinder, as it contains high-pressure gas.

การแก้ไขปัญหาและคำถามที่พบบ่อย

Q: My monitor is drooping or falling down.

A: The gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw ทวนเข็มนาฬิกา. Refer to the "Gas Spring Tension Adjustment" section in this manual or the "Tips for Using" video.

Q: My monitor is rising too easily or springing up.

A: The gas spring tension is too high for your monitor's weight. Reduce the tension by turning the adjustment screw ตามเข็มนาฬิกา. Refer to the "Gas Spring Tension Adjustment" section in this manual or the "Tips for Using" video.

Q: The monitor swivels too freely or is too stiff.

A: Adjust the swivel resistance by tightening or loosening the screw on the swivel joint with the Allen key. Refer to the "Swivel Adjustment" section.

Q: The monitor arm is unstable or wobbles.

A: Ensure that the C-clamp or grommet base is securely tightened to the desk. Also, check all connection points on the arm for tightness.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

BONTEC products are designed for durability and performance. For specific warranty details and customer support, please refer to the warranty card included in your product packaging or visit the official BONTEC website. If you encounter any issues or have questions regarding your monitor arm, please contact BONTEC customer service for assistance.

คุณยังสามารถค้นหาแหล่งข้อมูลเพิ่มเติมและข้อมูลผลิตภัณฑ์ได้ที่ BONTEC Store on Amazon.