NARWAL YJCC023

NARWAL Freo S Robot Vacuum Accessories Kit

Instruction Manual for Roller Brush, Side Brushes, and Filters

การแนะนำ

This manual provides detailed instructions for the installation, usage, and maintenance of the NARWAL Freo S Robot Vacuum Accessories Kit. This kit includes essential replacement parts to ensure your NARWAL Freo S robot vacuum cleaner maintains optimal performance.

เนื้อหาแพ็คเกจ

Please verify that all items are present in your accessory kit:

  • แปรงลูกกลิ้ง 1 อัน
  • 2 x Side Brushes (Left and Right)
  • ฟิลเตอร์ 2 ชิ้น
NARWAL Freo S Accessories Kit showing one roller brush, two side brushes, and two filters

Image: Contents of the NARWAL Freo S Robot Vacuum Accessories Kit.

คำแนะนำในการติดตั้ง

Ensure the robot vacuum is powered off and disconnected from its charging station before performing any installation or replacement procedures.

1 การเปลี่ยนแปรงลูกกลิ้ง

  1. Turn the robot vacuum upside down on a flat, stable surface.
  2. Locate the brush guard cover, usually secured by two tabs or screws. Press the tabs or unscrew to remove the cover.
  3. Lift out the old roller brush.
  4. Insert the new roller brush, ensuring the square end fits into the corresponding slot and the round end with the bearing clicks into place.
  5. Replace the brush guard cover and secure it.
Robot vacuum cleaner showing the underside with the roller brush compartment

Image: Underside of the robot vacuum, illustrating the roller brush area.

2. การเปลี่ยนแปรงด้านข้าง

  1. พลิกหุ่นยนต์ดูดฝุ่นคว่ำลง
  2. Locate the side brushes. They are typically held in place by a single screw.
  3. Use a screwdriver to remove the screw and detach the old side brush.
  4. Align the new side brush with the post and secure it with the screw. Ensure the correct brush (L for left, R for right) is installed if marked.
Robot vacuum cleaner on a wooden floor, showing its side brushes

Image: Robot vacuum in operation, showing the side brushes.

3. Replacing the Filters

  1. Open the top cover of the robot vacuum to access the dustbin.
  2. นำถังขยะออกจากหุ่นยนต์
  3. เปิดฝาถังเก็บฝุ่นเพื่อดูช่องใส่แผ่นกรอง
  4. ถอดตัวกรองเก่าออกโดยดึงออก
  5. ใส่แผ่นกรองใหม่เข้าไปในช่อง โดยตรวจสอบให้แน่ใจว่าเข้าที่อย่างถูกต้อง
  6. Close the dustbin cover, reinsert the dustbin into the robot, and close the top cover.
Robot vacuum cleaner with its dustbin removed, showing the filter access

Image: Accessing the dustbin and filter compartment of the robot vacuum.

Usage Guidelines and Replacement Frequency

To maintain optimal cleaning performance and extend the lifespan of your NARWAL Freo S robot vacuum, it is recommended to replace accessories regularly.

  • แปรงลูกกลิ้ง: Replace every 6-12 months, or sooner if visible wear or damage occurs.
  • แปรงด้านข้าง: Replace every 3-6 months, or sooner if bristles are bent, worn, or missing.
  • ตัวกรอง: Replace every 2-3 months, or more frequently if you have pets or experience high dust levels.

Actual replacement frequency may vary based on usage habits and environment.

การซ่อมบำรุง

Regular cleaning of your accessories will help prolong their effectiveness between replacements.

  • แปรงลูกกลิ้ง: Remove hair and debris tangled around the brush and its ends weekly. A cleaning tool (often included with the robot) can assist.
  • แปรงด้านข้าง: Check for tangled hair or debris weekly and remove as needed.
  • ตัวกรอง: Tap the filter gently over a trash can to remove dust and debris weekly. Do not wash filters with water unless explicitly stated by the manufacturer, as this can damage them.

การแก้ไขปัญหา

If you encounter issues after replacing accessories, consider the following:

  • Brush not spinning: Ensure the roller brush and side brushes are correctly installed and free from obstructions. Check if the brush guard cover is properly secured.
  • ลดพลังดูด: A clogged filter is a common cause. Ensure the new filter is clean and properly seated.
  • เสียงผิดปกติ: Check all brushes for tangled hair or foreign objects. Ensure all parts are securely in place.
  • Robot error messages: Refer to your main NARWAL Freo S robot vacuum manual for specific error codes. Ensure genuine NARWAL accessories are used.

ข้อมูลจำเพาะ

ส่วนประกอบQuantity in Kitวัสดุ
แปรงลูกกลิ้ง1พลาสติก, ขนแปรง
แปรงด้านข้าง2Plastic, Nylon Bristles
ตัวกรอง2HEPA-type material, Plastic frame

ชื่อรุ่น : YJCC023

ยี่ห้อ: นาร์วาล

ขนาดสินค้า : Approximately 2.54 x 2.54 x 2.54 cm (individual components vary)

น้ำหนักสินค้า: 180 grams (total kit)

การรับประกันและการสนับสนุน

NARWAL accessories are designed for durability and performance. For specific warranty information regarding this accessory kit, please refer to the warranty policy provided with your original NARWAL Freo S robot vacuum or visit the official NARWAL webเว็บไซต์.

For technical support, troubleshooting assistance, or to purchase additional genuine NARWAL accessories, please contact NARWAL customer service or visit their official support channels. Using non-genuine parts may void your robot vacuum's warranty and affect its performance.

NARWAL Official Webเว็บไซต์: www.narwal.com

เอกสารที่เกี่ยวข้อง - YJCC023

พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra
คู่มือการใช้งานสำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra ซึ่งประกอบด้วยคำแนะนำในการติดตั้ง การใช้งาน และการบำรุงรักษา รวมถึงรายละเอียดผลิตภัณฑ์เพิ่มเติมview, ข้อมูลจำเพาะ และการแก้ไขปัญหา
พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra ครอบคลุมการตั้งค่า การใช้งาน โหมดการทำความสะอาด การบำรุงรักษา และข้อมูลจำเพาะทางเทคนิค เรียนรู้วิธีใช้อุปกรณ์ของคุณให้เกิดประโยชน์สูงสุด
พรีview คู่มือผู้ใช้และคู่มือการติดตั้งโมดูลแลกเปลี่ยนน้ำอัตโนมัติ Narwal
คู่มือผู้ใช้และคู่มือการติดตั้งฉบับสมบูรณ์สำหรับโมดูลเปลี่ยนน้ำอัตโนมัติ Narwal (รุ่น YJMA002) ออกแบบมาสำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo ประกอบด้วยข้อมูลการตั้งค่า การบำรุงรักษา การแก้ไขปัญหา และการรับประกัน
พรีview คู่มือผู้ใช้โมดูลแลกเปลี่ยนน้ำอัตโนมัติ Narwal
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับโมดูลเปลี่ยนน้ำอัตโนมัติ Narwal ออกแบบมาสำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo ครอบคลุมการติดตั้ง ส่วนประกอบของผลิตภัณฑ์ สิ่งที่บรรจุในกล่อง การบำรุงรักษา ข้อมูลจำเพาะ รหัสข้อผิดพลาด และข้อมูลการรับประกัน
พรีview Narwal Robot Vacuum and Mop User Manual (YJCC023)
Comprehensive user manual for the Narwal Robot Vacuum and Mop (Model YJCC023), covering setup, operation, features, and specifications. Learn how to use your Narwal robot for efficient cleaning.
พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal: การตั้งค่า คุณสมบัติ และข้อมูลจำเพาะ
คู่มือผู้ใช้ฉบับนี้ให้คำแนะนำโดยละเอียดเกี่ยวกับการติดตั้ง การใช้งาน และการบำรุงรักษาหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal ของคุณ ครอบคลุมถึงคุณสมบัติของผลิตภัณฑ์ โหมดการทำความสะอาด การสร้างแผนที่ การเชื่อมต่อกับแอป และข้อมูลจำเพาะทางเทคนิค