การแนะนำ
Welcome to the TTROARDS TT19LCD2 Drone User Manual. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your new drone. Please read this manual thoroughly before operating the device to ensure safe and optimal performance.
1. การตั้งค่า
1.1 การแกะกล่องและการตรวจสอบเบื้องต้น
Carefully unpack all components from the carrying case. Verify that all items listed in the package contents are present and undamaged. If any items are missing or damaged, please contact customer support.
1.2 การชาร์จแบตเตอรี่
The drone is equipped with a 3.7V 1200mAh rechargeable modular battery. Use the original charging cable provided. Connect the battery to a USB power source. The red indicator light will illuminate during charging and turn off when fully charged. Charging time is approximately 180 minutes. Do not overcharge.
1.3 Assembling the Remote Controller
Insert 3 AA batteries (not included) into the remote controller. Attach the joysticks by screwing them into place. Extend the phone holder if you plan to use a smartphone for FPV viewการไอเอ็นจี
Image: The remote controller features an integrated 2.8-inch HD display and supports expandable storage up to 32GB.
1.4 การประกอบโดรน
Unfold the drone arms until they lock into position. Insert the charged modular battery into the drone's designated slot until it clicks securely. Ensure propellers are correctly installed according to the A/B markings on the blades and drone arms.
Image: The TTROARDS TT19LCD2 Drone with its 4K UHD camera and foldable design.
1.5 Connecting Controller and Drone
Place the drone on a flat, level surface. Turn on the drone by pressing the power button; its LEDs will flash. Turn on the remote controller. Push the left joystick to the highest point, then back to the lowest point. The controller will beep, and the drone's indicator lights will stop flashing, indicating a successful connection.
1.6 การสอบเทียบ
Orient the drone's head and controller in the same direction. Press the calibration button on the controller. The controller will beep, and the drone indicator lights will quickly flash and then stay on, confirming calibration is complete.
1.7 App Installation and Phone Connection
Scan the QR code in the instruction manual to download the companion app (HFun) for iOS or Android. Turn off your phone's cellular network, then enable Wi-Fi. Connect to the drone's Wi-Fi network (usually starting with
ไม่มีเอกสารที่เกี่ยวข้อง