SONICAKE Levitate Delay Reverb Pedal & Power Supply User Manual

การแนะนำ

Welcome to the user manual for your SONICAKE Levitate Delay Reverb Pedal and accompanying 9V DC 1A Power Supply. This comprehensive guide will assist you in understanding, setting up, operating, and maintaining your new effects pedal. The Levitate pedal combines both digital delay and reverb effects into a single, compact unit, offering a wide range of tonal possibilities for your guitar.

โปรดอ่านคู่มือนี้อย่างละเอียดก่อนใช้งานผลิตภัณฑ์ เพื่อให้มั่นใจได้ถึงประสิทธิภาพสูงสุดและอายุการใช้งานที่ยาวนาน

สินค้าเกินview

คุณสมบัติหลัก

• Dual Effects: Combines digital delay and reverb effects in one pedal.
• ระยะเวลารอสายที่ยาวนานขึ้น: Offers a maximum delay time of up to 2000ms for expansive echoes.
• Versatile Reverb: Features a large schedulable Decay parameter for diverse reverb textures.
• Tap Tempo Functionality: Allows for precise synchronization of delay time via the footswitch.
• Trail Function: Enables natural decay of effects even after the pedal is bypassed.
• การบายพาสบัฟเฟอร์: Specially designed buffer bypass circuit maintains signal integrity and tone clarity.
• โครงสร้างทนทาน: Housed in a lightweight yet sturdy aluminum-alloy casing designed to withstand regular use.

การควบคุมและการเชื่อมต่อ

The SONICAKE Levitate pedal features intuitive controls for both delay and reverb effects, along with standard input/output jacks and a power input.

รูปที่ 1: เกินview of the SONICAKE Levitate Delay Reverb Pedal and included 9V DC 1A Power Supply.

• ปุ่ม REVERB: Adjusts the overall level or mix of the reverb effect.
• ปุ่ม DECAY: Controls the length of the reverb tail, from short room sounds to long, ambient washes.
• ข้อเสนอแนะลูกบิด: (Delay Section) Determines the number of repeats for the delay effect.
• ปุ่มหมุนเวลา: (Delay Section) Sets the delay time, from short slap-back to long, rhythmic delays.
• WET Knob: (Delay Section) Controls the volume of the delayed signal.
• ลูกบิดแห้ง: (Delay Section) Controls the volume of the original, unprocessed signal.
• สวิตช์เท้าเหยียบ REVERB: Toggles the reverb effect on/off. Hold to activate the Trail function.
• DELAY Footswitch: Toggles the delay effect on/off. Hold to activate Tap Tempo.
• แจ็คอินพุต: Connect your guitar or the output of a preceding pedal here.
• แจ็คเอาท์พุท: เชื่อมต่อกับของคุณ amplifier or the input of a subsequent pedal here.
• อินพุต DC 9V: Connect the included 9V DC 1A power supply (center negative) here.

รูปที่ 2: ระยะใกล้ view of the Levitate pedal's control knobs for both delay and reverb effects.

Figure 3: Illustration of the footswitch functions, including Tap Tempo for delay and Trail for reverb.

การตั้งค่า

1. การเชื่อมต่อไฟฟ้า: Connect the included 9V DC 1A power supply to the DC 9V input jack on the pedal. Ensure the power supply is center negative. Then, plug the power supply into a standard AC outlet.

Figure 4: Proper power connection using the 9V DC center negative power supply.
2. การเชื่อมต่อเครื่องมือ: Connect your guitar to the INPUT jack of the Levitate pedal using a standard 1/4-inch instrument cable.
3. Ampการเชื่อมต่อลิฟเวอร์: Connect the OUTPUT jack of the Levitate pedal to your amplifier's input or the input of the next pedal in your signal chain using another 1/4-inch instrument cable.

รูปที่ 5: อดีตample of connecting the Levitate pedal within a guitar effects setup.

สำคัญ: Always connect the power supply last after all audio connections are made, and disconnect it first when powering down to prevent pops or damage.

การดำเนินการ

The SONICAKE Levitate pedal offers independent control over its delay and reverb effects, allowing for a wide range of sonic textures.

Delay Effect Operation

• Activating Delay: Press the right footswitch (labeled DELAY) to toggle the delay effect on or off. The corresponding LED will illuminate when active.
• Adjusting Delay Time (TIME knob): Rotate the TIME knob to set the duration between repeats. This ranges from very short (slap-back) to up to 2000ms for long, ambient delays.
• Adjusting Feedback (FEEDBACK knob): Control the number of repeats by adjusting the FEEDBACK knob. Higher settings result in more repeats, potentially leading to self-oscillation at maximum.
• Mixing Delay (WET/DRY knobs): The WET knob controls the volume of the delayed signal, while the DRY knob controls the volume of your original, unprocessed guitar signal. Adjust these to find the perfect blend.
• แตะจังหวะ: While the delay is active, hold down the DELAY footswitch for approximately 1 second to enter Tap Tempo mode. Tap the footswitch two or more times to set the delay time rhythmically. The LED will flash to indicate the set tempo.

Reverb Effect Operation

• Activating Reverb: Press the left footswitch (labeled REVERB) to toggle the reverb effect on or off. The corresponding LED will illuminate when active.
• Adjusting Reverb Level (REVERB knob): Rotate the REVERB knob to control the overall intensity or mix of the reverb effect.
• Adjusting Decay (DECAY knob): The DECAY knob controls the length of the reverb tail. Lower settings provide shorter, more subtle reverb, while higher settings create long, atmospheric decays.
• Trail Function: Hold down the REVERB footswitch for approximately 1 second to activate the Trail function. When active, the reverb effect will naturally decay even after the pedal is bypassed, preventing an abrupt cut-off.

Figure 6: The Levitate pedal in operation, with effect indicator LEDs illuminated.

การซ่อมบำรุง

Proper care and maintenance will ensure the longevity and optimal performance of your SONICAKE Levitate pedal.

• การทำความสะอาด: Use a soft, dry cloth to wipe down the pedal's casing. สำหรับคราบฝังแน่น ให้ใช้น้ำยาทำความสะอาดเล็กน้อยamp cloth can be used, but ensure no moisture enters the jacks or knobs. Avoid abrasive cleaners or solvents.
• พื้นที่จัดเก็บ: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for extended periods, disconnect all cables and the power supply.
• การดูแลแหล่งจ่ายไฟ: Handle the power supply and its cable with care. Do not bend the cable sharply or place heavy objects on it. Always grasp the plug, not the cable, when disconnecting from the pedal or outlet.
• Footswitch and Knob Care: Avoid excessive force when operating footswitches and turning knobs.

Figure 7: The robust aluminum-alloy casing of the Levitate pedal, designed for durability.

การแก้ไขปัญหา

If you encounter any issues with your SONICAKE Levitate pedal, please refer to the following common problems and solutions:

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

SONICAKE products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please refer to the official SONICAKE webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง

When contacting support, please have your product model (Levitate) and ASIN (B0F631T52G) ready for faster assistance.

คุณยังสามารถเยี่ยมชม SONICAKE Store on Amazon สำหรับข้อมูลเพิ่มเติมและช่องทางการติดต่อ