การแนะนำ
This manual provides detailed instructions for the proper installation, maintenance, and safe use of your ZIEGER Crash Bar Kit. Designed specifically for the Triumph Tiger 900, GT, Rally, and Pro models (C701 | C702) from 2019 to 2024, these crash bars offer optimal protection for critical motorcycle components. Please read this manual thoroughly before beginning installation to ensure correct assembly and to prevent damage or injury.
ข้อมูลด้านความปลอดภัย
- Always wear appropriate personal protective equipment (PPE) during installation.
- Ensure the motorcycle is stable and securely supported on a center stand or paddock stand before commencing work.
- Allow the engine and exhaust system to cool completely before handling to avoid burns.
- Use only the provided hardware and tools specified in this manual.
- If you are unsure about any step, consult a qualified motorcycle mechanic.
- After installation, verify all bolts are tightened to the specified torque values.
- Regularly inspect the crash bars and mounting points for any signs of wear, damage, or loose fasteners.
เนื้อหาแพ็คเกจ
โปรดตรวจสอบให้แน่ใจว่าชิ้นส่วนทั้งหมดครบถ้วนและไม่เสียหายก่อนดำเนินการติดตั้ง
- 1x ZIEGER Crash Bar, Right Side
- 1x ZIEGER Crash Bar, Left Side
- 1x Set of Mounting Hardware (bolts, washers, spacers, etc.)
- 1x Assembly Instructions (this manual)
If any parts are missing or damaged, please contact ZIEGER customer support.
ความเข้ากันได้
This ZIEGER Crash Bar Kit is compatible with the following motorcycle models:
- Triumph Tiger 900 (C701 | C702) - Model Years 2019-2024
- Triumph Tiger 900 GT (C701 | C702) - Model Years 2019-2024
- Triumph Tiger 900 Rally (C701 | C702) - Model Years 2019-2024
- Triumph Tiger 900 Pro (C701 | C702) - Model Years 2019-2024
หมายเหตุสำคัญ: This crash bar kit is ไม่ compatible with the Triumph Tiger 900 GT Low model.
การติดตั้งและการตั้งค่า
Follow these steps carefully for proper installation. It is recommended to have a second person assist during certain stagใช่
เครื่องมือที่จำเป็น (ไม่รวม):
- ประแจแรงบิด
- Socket set (various sizes, typically 10mm, 13mm, 17mm, 19mm)
- Hex key set (Allen keys)
- Thread-locking compound (medium strength, e.g., Loctite 243)
- ผ้าขี้ริ้วสะอาด
ขั้นตอนการติดตั้ง:
- เตรียมรถจักรยานยนต์: Park the motorcycle on a level, stable surface. Secure it using a center stand or appropriate paddock stands to prevent it from tipping over. Ensure the engine and exhaust are cool.
- ระบุจุดติดตั้ง: Locate the designated mounting points on the motorcycle frame. These typically involve existing engine mount bolts or frame attachment points. Refer to the diagrams below for visual guidance.
- Remove Existing Bolts (if necessary): Carefully remove any existing bolts from the identified mounting points. Work on one side of the motorcycle at a time to maintain structural integrity.
- Position the Crash Bar: Hold the crash bar (e.g., left side) in position, aligning its mounting holes with the frame's attachment points.
- ติดตั้งฮาร์ดแวร์ติดตั้ง: Insert the provided bolts, washers, and spacers as indicated in the assembly diagram. Apply a small amount of thread-locking compound to the bolt threads before insertion. Hand-tighten all bolts initially.
- ทำซ้ำสำหรับฝั่งตรงข้าม: Follow steps 3-5 for the other side of the motorcycle, installing the second crash bar.
- Align and Adjust: Once both crash bars are loosely installed, ensure they are properly aligned and do not interfere with any other motorcycle components (e.g., handlebars, fairings, cables).
- ขันน็อตทุกตัวให้ได้แรงบิดที่ต้องการ: Using a torque wrench, tighten all mounting bolts to the manufacturer's specified torque values. Refer to your motorcycle's service manual for specific frame bolt torque specifications, or use general torque values for the bolt size if not specified by ZIEGER. อย่าขันแน่นจนเกินไป
- การตรวจสอบขั้นสุดท้าย: Double-check all fasteners to ensure they are securely tightened. Verify that the crash bars are firmly attached and do not wobble. Start the motorcycle and check for any unusual vibrations or noises.
แผนภาพการติดตั้ง:
รูปที่ 1: หน้าผาก view of the ZIEGER crash bar installed on a Triumph Tiger 900. This image highlights the robust construction and how the bar integrates with the motorcycle's frame, providing protection to the engine and radiator area. Note the secure mounting points visible around the engine casing and lower frame.
รูปที่ 2: ด้านข้าง view of the ZIEGER crash bar mounted on a Triumph Tiger 900. This perspective illustrates the extent of protection offered to the engine, exhaust headers, and lower fairing. The design follows the contours of the motorcycle, ensuring a secure fit and minimal aesthetic impact while maximizing protective coverage.
การใช้งานและการดูแลรักษา
Once installed, the ZIEGER Crash Bars require no special operation. They are designed to provide passive protection to your motorcycle's engine and frame in the event of a tip-over or low-speed slide. While robust, they are not indestructible and are intended to absorb impact energy to minimize damage to the motorcycle itself.
- การตรวจสอบปกติ: Periodically check the crash bars for any signs of damage, cracks, or deformation, especially after any incident.
- การทำความสะอาด: Clean the crash bars with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the powder coating.
- Post-Impact: If the crash bars have sustained an impact, even a minor one, they should be thoroughly inspected for structural integrity. It is recommended to replace them if any significant damage is observed, as their protective capacity may be compromised.
การซ่อมบำรุง
To ensure the continued effectiveness and safety of your ZIEGER Crash Bars, perform the following maintenance checks:
- Fastener Check (Every 3,000 km or 3 months): Inspect all mounting bolts for tightness. Re-torque any loose fasteners to the specified values.
- Visual Inspection (Before each ride): Quickly check the crash bars for any visible damage, bends, or corrosion.
- Structural Integrity (Annually or after any incident): Conduct a thorough inspection of the entire crash bar structure for cracks, stress fractures, or significant deformation. If any are found, replacement is recommended.
การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Crash bars feel loose or rattle. | สลักเกลียวยึดหลวม | Check and re-torque all mounting bolts to specifications. Apply thread-locking compound if not previously used. |
| Interference with other motorcycle components. | การจัดตำแหน่งไม่ถูกต้องในระหว่างการติดตั้ง | Loosen all mounting bolts, re-align the crash bars, and then re-tighten. Ensure no cables or hoses are pinched. |
| Crash bar is bent or damaged after an incident. | Impact sustained. | For safety and optimal protection, replace the damaged crash bar. Do not attempt to straighten or repair. |
ข้อมูลจำเพาะ
- ผลิตภัณฑ์: ZIEGER Crash Bar Kit
- หมายเลขรุ่น: 10011715
- วัสดุ: เหล็กเคลือบผง
- สี: สีดำ
- ความเข้ากันได้: Triumph Tiger 900, GT, Rally, Pro (C701 | C702) 2019-2024 (Excluding GT Low)
- ผู้ผลิต: IBEX GmbH
การรับประกันและการสนับสนุน
ZIEGER products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support, missing parts, or any questions regarding your ZIEGER Crash Bar Kit, please contact the manufacturer:
ผู้ผลิต: IBEX GmbH
โทรศัพท์: +49 3501 5719730
อีเมล: info@ibex-parts.de
โปรดเตรียมหมายเลขรุ่นผลิตภัณฑ์ (10011715) และรายละเอียดการซื้อให้พร้อมเมื่อติดต่อฝ่ายสนับสนุน