ROBOTIME EAB01 3D Puzzle Gift Factory Wooden Model Instruction Manual

การแนะนำ

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME EAB01 3D Puzzle Gift Factory Wooden Model. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience. This model is designed to be a dynamic and interactive display piece, featuring a gift production line, LED lighting, and music.

ข้อมูลด้านความปลอดภัย: Not suitable for children under 14 years due to small parts and complex assembly. Adult supervision is recommended for younger builders within the recommended age range.

มีอะไรอยู่ในกล่อง

Your ROBOTIME EAB01 kit includes all necessary components for assembly. Please verify all parts are present before starting.

• Pre-cut wooden sheets with puzzle pieces
• Electronic components (LED lights, music module)
• คู่มือคำแนะนำในการประกอบ
• Small accessories (e.g., screws, wires, plastic parts)

ภาพ: เหนือview of the kit contents, including wooden sheets and the instruction manual.

การติดตั้งและการประกอบ

The ROBOTIME EAB01 model is designed for advanced assembly, requiring approximately 12 hours to complete. No glue is needed as pieces fit together using wooden tenon and mortise joints.

การตระเตรียม

1. แกะส่วนประกอบ: Carefully remove all wooden sheets and other components from the packaging.
2. จัดระเบียบชิ้นส่วน: Identify and organize pieces by their corresponding sheet numbers or labels as indicated in the assembly manual.
3. Review คำแนะนำ: Thoroughly read the entire assembly instruction manual provided in the kit before starting. Pay close attention to diagrams and step-by-step guidance.
4. เตรียมพื้นที่ทำงาน: Ensure you have a clean, well-lit, and spacious work area to prevent loss of small parts.

ขั้นตอนการประกอบ

Follow the illustrated assembly instructions provided with your kit. The process involves interlocking wooden pieces to form the structure, followed by the integration of electronic components for lighting and music.

• ขั้นตอนการก่อสร้างทีละขั้นตอน: Assemble the model section by section, ensuring each joint is secure. Refer to the manual for the correct sequence.
• การบูรณาการทางอิเล็กทรอนิกส์: Install the LED lights and music module as directed. Ensure all connections are firm.
• การทดสอบ: Periodically test the electronic functions during assembly if possible, especially before sealing sections that might make access difficult later.

ภาพ: รายละเอียด view of the "Raw Stock" material processing and "Assembly Line" sections of the Gift Factory model.

ภาพ: รายละเอียด view of the "Packaging and Sealing" and "Bow Tying" sections of the Gift Factory model's production line.

Image: The kit components spread out, demonstrating the wooden mortise joint design that requires no glue for assembly.

คำแนะนำการใช้งาน

Once fully assembled, your ROBOTIME EAB01 Gift Factory model can be operated to showcase its dynamic features.

การเปิดเครื่อง

Locate the power switch, typically found at the base or rear of the model. Flip the switch to the 'ON' position to activate the LED lights and music function.

Image: The assembled Gift Factory model with its lights on and music playing, illustrating its full operational state.

Dynamic Production Line

The model features a simulated gift production line. Observe the movement of the elves and gifts through the various stages: material processing, assembly line, packaging and sealing, and bow tying.

• Material Processing: Gifts begin their journey in the "Raw Stock" area.
• Assembly Line: Gifts move along the conveyor system.
• Packaging and Sealing: Gifts are prepared for shipment.
• Bow Tying: The final touch is added to the gifts.

Image: A visual breakdown of the four key stages of the Gift Factory's production process.

การซ่อมบำรุง

Proper care will ensure the longevity and continued enjoyment of your ROBOTIME EAB01 model.

• การทำความสะอาด: Use a soft, dry cloth to gently wipe dust from the model. Avoid using water or chemical cleaners, as they may damage the wood or electronic components.
• พื้นที่จัดเก็บ: Store the model in a dry environment, away from direct sunlight and extreme temperatures, to prevent warping or fading of the wood.
• การจัดการ: Handle the model with care, especially when moving it, to avoid dislodging or damaging delicate parts.
• การเปลี่ยนแบตเตอรี่: If your model uses batteries for the lights and music, replace them as needed following the instructions in the original assembly manual. Ensure correct polarity.

การแก้ไขปัญหา

If you encounter any issues with your ROBOTIME EAB01 model, refer to the following common problems and solutions:

ข้อมูลจำเพาะ

Image: Diagram illustrating the assembled dimensions of the Gift Factory model.

การรับประกันและการสนับสนุน

ROBOTIME offers support for lost or damaged parts. For assistance, please contact ROBOTIME customer service directly.

For further information or support, you may visit the official ROBOTIME store on Amazon: ร้าน ROBOTIME.

You can also scan the QR code on the product packaging for more information or support. An example link from the packaging is: ROBOTIME Support Link.

The UPC for this product is 6946785123371.