NARWAL Freo Z10, Freo Pro

NARWAL Detangling Side Brush Instruction Manual

For Freo Z10 & Freo Pro Robot Vacuum and Mop

1. สินค้าหมดview

This manual provides instructions for the NARWAL Detangling Side Brush, an accessory designed for use with NARWAL Freo Z10 and Freo Pro robot vacuum and mop models. This side brush is engineered to minimize hair tangling during operation, contributing to consistent cleaning performance.

The package includes two side brushes. No additional tools are required for installation.

2. การติดตั้ง

Follow these steps to replace or install the side brushes on your NARWAL Freo Z10 or Freo Pro robot vacuum and mop.

  1. Step 1: Remove Old Side Brushes
    Gently pull upwards on the existing side brushes to detach them from the robot.
  2. Step 2: Install New Side Brushes
    Locate the 'L' and 'R' symbols on the new side brushes and the corresponding slots on the robot's underside. Align the brush with the correct slot (left brush to 'L', right brush to 'R') and press down firmly until it clicks into place. Ensure the brush is securely attached.

Note: The side brushes are not left-right symmetric. Incorrect installation may impair brush function.

Image showing step-by-step installation of the NARWAL Detangling Side Brush. Step 1 depicts a hand pulling an old side brush off the robot. Step 2 shows a hand pressing a new side brush into place, aligning with L and R markings.

Figure 2.1: Side Brush Installation Steps

3. ฟังก์ชันการใช้งาน

The NARWAL Detangling Side Brush is designed to effectively collect debris while preventing hair from wrapping around the brush mechanism.

  • Certified Detangling: The brush is certified to achieve a 0% hair tangling rate, ensuring consistent performance.
  • Adaptive Angle: The dynamic side brushes can shift from a 'V' shape to an 'II' shape, adjusting their angle to actively loosen tangled hair for efficient collection.
  • Dynamic Bristles: The bristles move dynamically to further assist in loosening tangled hair.
  • Soft Rubber Sleeve: A rubber sleeve is integrated to block hair from wrapping and causing tangles around the brush base.
Image illustrating the certified detangling capability of the side brush on the robot vacuum's underside.

Figure 3.1: Certified Detangling Side Brush

Three sequential images showing the side brush adapting its angle to loosen hair. Panel 1: V-shaped brush captures hair. Panel 2: Brush reverses to 'II' shape for release. Panel 3: Brush spins, stops, and hair is sucked in.

Figure 3.2: Side Brush Adapting Angle to Loosen Hair

Two close-up images of the side brush. Left panel shows 'Dynamic Bristles' with arrows indicating movement. Right panel shows 'Soft Rubber Sleeve' blocking hair from wrapping.

Figure 3.3: Dynamic Detangling Side Brushes

4. การบำรุงรักษา

Regular maintenance of the side brushes ensures optimal cleaning performance and extends their lifespan.

  • การทำความสะอาด: It is recommended to clean the side brush every two weeks to remove accumulated dust, hair, and debris.
  • การทดแทน: For best performance, replace the side brushes every three months.

5. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ยี่ห้อนาร์วาล
ชื่อรุ่นDetangling Side Brush
ความเข้ากันได้NARWAL Freo Z10, NARWAL Freo Pro
ขนาดสินค้ายาว 4.6 นิ้ว x กว้าง 2.1 นิ้ว x สูง 1.2 นิ้ว
น้ำหนักสินค้า0.704 ออนซ์
ส่วนประกอบที่รวมอยู่2 x แปรงด้านข้าง
คุณสมบัติพิเศษยุ่งเหยิงฟรี

6. การสนับสนุน

For further assistance, technical support, or warranty inquiries, please refer to the official NARWAL website or contact NARWAL customer service directly. Ensure you have your product model information available when seeking support.

Official NARWAL Webเว็บไซต์: www.narwal.com

เอกสารที่เกี่ยวข้อง - Freo Z10, Freo Pro

พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z10
คู่มือการใช้งานฉบับสมบูรณ์สำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z10 ครอบคลุมการติดตั้ง การใช้งาน คุณสมบัติ และข้อมูลจำเพาะ เรียนรู้วิธีใช้หุ่นยนต์ดูดฝุ่นและถูพื้นของคุณเพื่อให้ได้ประสิทธิภาพการทำความสะอาดที่ดีที่สุด
พรีview แบบฟอร์มดัชนีความสามารถในการซ่อมแซมของเครื่องดูดฝุ่นหุ่นยนต์ Narwal Freo Z10 Ultra
เอกสารฉบับนี้อธิบายถึงวิธีการและขั้นตอนการคำนวณดัชนีความสามารถในการซ่อมแซมของเครื่องดูดฝุ่นหุ่นยนต์ Narwal Freo Z10 Ultra โดยเป็นไปตามข้อกำหนดด้านสิ่งแวดล้อมของฝรั่งเศส โดยให้รายละเอียดเกี่ยวกับเกณฑ์ด้านเอกสาร การถอดประกอบ ความพร้อมใช้งานและราคาอะไหล่ และคุณลักษณะเฉพาะของผลิตภัณฑ์
พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra
คู่มือผู้ใช้ฉบับสมบูรณ์สำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra ครอบคลุมการตั้งค่า การใช้งาน โหมดการทำความสะอาด การบำรุงรักษา และข้อมูลจำเพาะทางเทคนิค เรียนรู้วิธีใช้อุปกรณ์ของคุณให้เกิดประโยชน์สูงสุด
พรีview คู่มือผู้ใช้และคู่มือการติดตั้งโมดูลแลกเปลี่ยนน้ำอัตโนมัติ Narwal
คู่มือผู้ใช้และคู่มือการติดตั้งฉบับสมบูรณ์สำหรับโมดูลเปลี่ยนน้ำอัตโนมัติ Narwal (รุ่น YJMA002) ออกแบบมาสำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo ประกอบด้วยข้อมูลการตั้งค่า การบำรุงรักษา การแก้ไขปัญหา และการรับประกัน
พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra
คู่มือการใช้งานสำหรับหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal Freo Z Ultra ซึ่งประกอบด้วยคำแนะนำในการติดตั้ง การใช้งาน และการบำรุงรักษา รวมถึงรายละเอียดผลิตภัณฑ์เพิ่มเติมview, ข้อมูลจำเพาะ และการแก้ไขปัญหา
พรีview คู่มือการใช้งานหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal: การตั้งค่า คุณสมบัติ และข้อมูลจำเพาะ
คู่มือผู้ใช้ฉบับนี้ให้คำแนะนำโดยละเอียดเกี่ยวกับการติดตั้ง การใช้งาน และการบำรุงรักษาหุ่นยนต์ดูดฝุ่นและถูพื้น Narwal ของคุณ ครอบคลุมถึงคุณสมบัติของผลิตภัณฑ์ โหมดการทำความสะอาด การสร้างแผนที่ การเชื่อมต่อกับแอป และข้อมูลจำเพาะทางเทคนิค