Proster PST230aus-US Pneumatic Riveter Instruction Manual

1. สินค้าหมดview

The Proster PST230aus-US Pneumatic Riveter is a professional-grade air-powered tool designed for efficient and reliable riveting. It features a robust 3-claw gripping mechanism for secure rivet placement and comes with five interchangeable nosepieces to accommodate various rivet sizes. This tool is suitable for a wide range of applications, from automotive repairs to industrial tasks, and is compatible with steel, iron, and aluminum rivets. It is not designed for use with stainless steel rivets.

Figure 1: Proster PST230aus-US Pneumatic Riveter.

2. ข้อมูลด้านความปลอดภัย

Always prioritize safety when operating power tools. Failure to follow safety guidelines can result in serious injury.

• การปกป้องดวงตา: สวมแว่นตานิรภัยหรือแว่นครอบตาที่ได้รับการรับรองมาตรฐาน ANSI เสมอเพื่อป้องกันเศษวัสดุที่กระเด็นมา
• การป้องกันการได้ยิน: Use ear protection to prevent hearing damage from prolonged exposure to noise.
• การป้องกันมือ: Wear appropriate gloves to protect hands during operation and maintenance.
• แรงดันอากาศ: Ensure the air supply pressure does not exceed the maximum recommended operating pressure for the tool.
• ชิ้นงานที่ปลอดภัย: Always secure the material being riveted to prevent movement during operation.
• ถอดสายจ่ายอากาศ: Disconnect the air supply before changing nosepieces, performing maintenance, or when the tool is not in use.
• การระบายอากาศที่เหมาะสม: Operate the tool in a well-ventilated area.
• อ่านคู่มือ: โปรดอ่านและทำความเข้าใจคู่มือการใช้งานทั้งหมดก่อนใช้งานเครื่องมือ

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่ามีรายการทั้งหมดอยู่ในแพ็คเกจ:

• Proster PST230aus-US Pneumatic Riveter
• 5 Nosepieces (1/4" (6.4mm), 3/16" (4.8mm), 5/32" (4mm), 1/8" (3.2mm), 3/32" (2.4mm))
• Extra set of 3-Claw Jaw Pieces
• 500 Blind Rivets (Assortment: 2.4mm (100pcs), 3.2mm (150pcs), 4.0mm (130pcs), 4.8mm (100pcs), 6.4mm (20pcs))
• Air Inlet Connector (U.S.-specification)
• 2 Wrenches for nosepiece changes
• Mandrel Collector Bottle
• คู่มือการใช้งาน

Figure 2: Contents included with the Proster PST230aus-US Pneumatic Riveter kit.

4. ข้อมูลจำเพาะ

Figure 3: Detailed dimensions and specifications of the riveter.

5. การตั้งค่า

1. เชื่อมต่อแหล่งจ่ายอากาศ: Attach the U.S.-specification air inlet connector to the tool's air intake port. Connect an air hose from a compressor to the tool. Ensure the air pressure is set within the recommended range of 86-116 PSI.
2. Select Nosepiece: Choose the appropriate nosepiece that matches the diameter of the rivet you intend to use. The tool comes with five sizes: 2.4mm, 3.2mm, 4mm, 4.8mm, and 6.4mm. One nosepiece is pre-installed.
3. Install Nosepiece: Use the provided wrenches to loosen and remove the current nosepiece. Screw the selected nosepiece onto the tool and tighten it securely with the wrenches.
4. Check Jaws: The 3-claw design ensures a firm grip on the rivet. An extra set of jaw pieces is included for replacement if needed.

Figure 4: The 3-claw gripping design for secure riveting.

6. การดำเนินการ

Follow these steps for proper operation of the pneumatic riveter:

1. เตรียมวัสดุ: Drill a pilot hole in the materials to be joined, ensuring the hole size matches the rivet diameter.
2. ใส่หมุดย้ำ: Place the rivet into the selected nosepiece of the riveter.
3. เครื่องมือจัดตำแหน่ง: Insert the rivet into the pre-drilled hole in your workpiece. Ensure the tool is held firmly and perpendicular to the surface.
4. Actuate Riveter: Press the trigger to activate the pneumatic mechanism. The tool will pull the rivet mandrel, expanding the rivet and securing the materials. Continue holding the trigger until the mandrel breaks off.
5. Release Mandrel: The broken mandrel will be collected in the transparent mandrel collector bottle at the rear of the tool.

Figure 5: Step-by-step guide for operating the riveter.

7. การบำรุงรักษา

Regular maintenance ensures the longevity and optimal performance of your riveter.

• Clean Nosepiece and Jaws: After each use, disconnect the air supply and clean any debris from the nosepiece and the internal 3-claw jaws. This prevents jamming and ensures consistent gripping.
• Empty Mandrel Collector: Regularly empty the transparent mandrel collector bottle to prevent it from overfilling and obstructing the tool's operation.
• การหล่อลื่น: Apply a few drops of pneumatic tool oil to the air inlet before each use or at regular intervals, depending on usage frequency. This lubricates internal components and prevents wear.
• Inspect Air Hoses: Periodically check air hoses and connections for leaks or damage. Replace any worn or damaged components immediately.

Figure 6: The push button switch and muffler exhaust port, which helps reduce noise during operation.

8 การแก้ไขปัญหา

If you encounter issues with your Proster Pneumatic Riveter, refer to the following common problems and solutions:

9. การรับประกันและการสนับสนุน

For warranty information, technical support, or to purchase replacement parts, please contact Proster customer service. Refer to the product packaging or the official Proster webโปรดเยี่ยมชมเว็บไซต์เพื่อดูรายละเอียดการติดต่อและเงื่อนไขการรับประกันล่าสุด