RAINPOINT 3 Zone Sprinkler Timer

Enhanced Timer Performance

The water hose timer features a durable brass inlet and a reinforced inlet neck for added strength. The upgraded coil valve ensures less bucking and a more robust, smooth water flow.

ภาพ: ระยะใกล้ view of the reinforced brass inlet and internal coil valve mechanism.

Customized Zone Scheduling

The 3 zone sprinkler timer allows for individual watering plans, with adjustable durations from 1 minute to 4 hours and frequencies from 1 hour to 7 days.

Image: The timer connected to three distinct watering zones in a garden setting.

Weather-Resilient Build

With a sturdy ABS shell and IP65 waterproof rating, this watering timer is built to last, even in harsh outdoor conditions.

Image: The timer shown operating outdoors during rainfall, highlighting its waterproof design.

Flexible Watering Control

Easily adjust irrigation timer manual watering from 1 minute to 8 hours and set weather-responsive delays of 24H, 48H, or 72H to conserve water efficiently.

Image: The timer's LCD screen showing options for setting clock, start time, duration, and frequency.

อินเทอร์เฟซที่เป็นมิตรกับผู้ใช้

The ergonomic design and large, clear LCD display make hose timers for watering easy to read and operate, with low battery warnings to avoid unnecessary water loss.

Image: The timer's display showing a low battery warning and auto shut-off valve feature.

1. การติดตั้งแบตเตอรี่

Remove the battery compartment cover at the back of the timer. Insert 4 new AA (1.5V) alkaline batteries (not included). Ensure the battery compartment cover is securely reattached to maintain waterproofing.

Video: Unboxing of the RAINPOINT 3-Zone Water Timer, showing battery installation and overall product components.

2. Attaching to Faucet

Close your garden faucet. Apply Teflon tape to the faucet threads for a secure, leak-free connection. Attach the timer to the faucet, ensuring the display is vertical to prevent water ingress. If connections are loose or leaking, add more Teflon tape or use a rubber washer if faucet threads don't reach the timer inlet.

3. การต่อท่อ

Connect your garden hoses to the timer outlets. Turn the faucet on after setting the timer to test water flow.

1. Activate the Timer

Turn off the faucet and set the dial to "ON". Long-press the "OK/MANUAL" button and insert batteries to enter self-check. Release the button; valves will cycle open and closed (5 seconds each). Verify flow; if correct, the timer is ready for use. If not, retry or contact support. Remove batteries after testing, then reinsert for normal use.

Video: Demonstrates how to activate the 3-zone water timer before its first use, including valve self-check.

2. การตั้งนาฬิกา

Set the dial to "SET CLOCK". Use the "+" or "-" buttons to choose 24H/12H format, and press "OK" to confirm. Adjust the hour with "+" or "-" to match local time, noting AM/PM in 12H format. Press "OK" to toggle between hours and minutes. Rotate the dial clockwise to save and move on.

3. การตั้งโปรแกรมตารางการรดน้ำ

Set the dial to "START TIME". The hour flashes; adjust start time with "+" and "-" buttons. Press "OK" to toggle between hours and minutes. Rotate the dial clockwise to save and continue. Set the dial to "HOW LONG". The hour flashes; adjust watering duration from 1 minute to 4 hours with "+" and "-". Press "OK" to toggle between hours and minutes. Rotate the dial to save and move on. Set the dial to "HOW OFTEN". Use "+" and "-" to select frequency: 1 to 12 hours or 1 to 7 days. Rotate the dial to save and continue.

4 การรดน้ำด้วยมือ

Set the dial to "ON". Hold "MANUAL" for 3-5 seconds to enter manual mode. Use "ZONE" to switch zones, "+" to select, and "-" to deselect. Press "OK" to set time. Adjust duration with "+" or "-" (1 min to 8 hours), holding them for quick changes. The default watering duration is 10 minutes. Confirm and start watering by pressing "OK" when numbers flash; screen shows remaining time. To stop, hold "MANUAL" for 3-5 seconds or turn dial to "OFF" and back to "ON" to resume program.

Image: A user manually watering plants with the timer, showing the sequential zone activation.

5. ฟังก์ชั่นหน่วงเวลาฝน

At "ON", hold "DELAY / +" for 3 seconds to access rain delay. Adjust the flashing "24H" to 0H, 24H, 48H, or 72H with "+" and "-"; 0H cancels delay. Press "OK/Manual" to activate the rain delay program. Rain delay affects all three zones; setting it for one zone delays all zone plans. Rain delay cannot be paused; to stop, hold "DELAY/-" or turn dial to "OFF" and back to "ON".