คู่มือการใช้งานชุดเปิดประตูเลื่อน Beninca Bull 624R

การแนะนำ

This manual provides detailed instructions for the installation, operation, and maintenance of the Beninca Bull 624R Slide Gate Opener Kit. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety of the system.

ภาพ: เหนือview of the Beninca Bull 624R Slide Gate Opener Kit components. This includes the main motor unit, two remote controls, a separate receiver, a photocell sensor, and multiple sections of nylon gear rack for gate movement.

ข้อมูลด้านความปลอดภัย

Always prioritize safety during installation and operation. Failure to follow safety guidelines can result in serious injury or damage to property. Adhere to all local electrical codes and safety regulations.

• ตรวจสอบให้แน่ใจว่าการเชื่อมต่อทางไฟฟ้าทั้งหมดดำเนินการโดยช่างไฟฟ้าที่มีคุณสมบัติเหมาะสม
• Keep hands and loose clothing clear of moving gate parts.
• ห้ามเด็กเล่นใกล้ประตูหรือใช้งานอุปกรณ์ควบคุม
• ตรวจสอบประตูและกลไกเปิดประตูอย่างสม่ำเสมอเพื่อดูว่ามีร่องรอยการสึกหรอหรือความเสียหายหรือไม่
• The anti-crushing safety system must be tested after installation and periodically thereafter.

เนื้อหาชุด

The Beninca Bull 624R Slide Gate Opener Kit includes the following components:

• Beninca Bull 624R Operator: A 24VDC motor unit designed for sliding gates.
• รีโมทคอนโทรล: Two long-range 433.92 MHz remote controls with triple coding options.
• ผู้รับ: ONE.2WB receiver unit for remote control signals.
• เซ็นเซอร์ตาแมว: PRP retro-reflective polarized photocell sensor for safety.
• Nylon Gear Rack: Five 40-inch sections of nylon gear rack with steel cores for gate movement.

ข้อมูลจำเพาะ

การติดตั้งและการตั้งค่า

Proper installation is crucial for the safe and efficient operation of your gate opener. Refer to the detailed diagrams and instructions provided in the full installation guide (typically included with the product) for comprehensive steps.

1. การติดตั้งตัวควบคุมการทำงาน

Securely mount the Beninca Bull 624R operator on a stable, level concrete pad next to the gate. Ensure adequate clearance for gate movement and access for maintenance. The mounting position should allow the drive gear to properly engage with the gate's rack.

2. Installing the Gear Rack

Attach the nylon gear rack sections along the bottom edge of the sliding gate. Ensure the rack is level and properly meshed with the operator's drive gear. A small gap (approximately 1-2mm) between the gear and the rack is necessary to allow for thermal expansion and smooth operation.

Image: Detail of the nylon gear rack, showing the teeth designed to engage with the motor's drive gear. These sections are crucial for the gate's linear movement and must be installed precisely.

3. การเชื่อมต่อสายไฟ

Connect the power supply, photocell sensors, and any other accessories to the control board inside the operator unit. Always follow the wiring diagram provided in the complete installation manual. Ensure all connections are secure, properly insulated, and protected from environmental elements.

4. การติดตั้งโซล่าเซลล์

Install the retro-reflective photocell sensor on the gate posts, ensuring they are aligned and unobstructed. The photocell provides an essential safety feature, preventing the gate from closing if an obstruction is detected in its path. Test the photocell functionality after installation.

คำแนะนำการใช้งาน

1. การเปิดเครื่องและการตั้งโปรแกรมเบื้องต้น

After installation, power up the unit. Use the integrated LCD display to navigate the programming menu. Set gate limits, operating speeds (including soft-start and soft-stop functions), and anti-crushing sensitivity according to your gate's requirements and local safety standards. Refer to the full manual for detailed programming steps.

2. การจับคู่รีโมทคอนโทรล

To pair the remote controls with the gate opener:

1. Access the remote programming menu on the operator's LCD display.
2. Press the desired button on the remote control you wish to pair.
3. Confirm successful pairing on the LCD display. Repeat for additional remotes.

Image: The two included Beninca remote controls, featuring two buttons each, alongside the separate receiver unit. These are used for wireless operation of the gate opener.

3. คู่มือการใช้งาน

In case of power failure or malfunction, the gate can be operated manually. Locate the manual release mechanism on the operator unit (refer to the full manual for exact location and procedure), unlock it, and slide the gate by hand. Remember to re-engage the mechanism for automatic operation.

การซ่อมบำรุง

Regular maintenance ensures the longevity and reliable operation of your Beninca Bull 624R gate opener. Perform these checks periodically:

• รายเดือน: Inspect the gate's movement for any obstructions, ensure the gear rack is clean and free of debris, and check the photocell sensors for alignment and cleanliness.
• รายไตรมาส: Lubricate moving parts as recommended in the full manual. Check all electrical connections for tightness and corrosion. Test the anti-crushing safety feature by placing a soft object in the gate's path.
• รายปี: It is recommended to have a qualified technician perform a comprehensive inspection and service to ensure optimal performance and safety.

การแก้ไขปัญหา

This section addresses common issues you might encounter with your gate opener and provides potential solutions.

การรับประกันและการสนับสนุน

For specific warranty information and technical support, please refer to the documentation provided with your purchase or contact Beninca customer service directly. Keep your proof of purchase for any warranty claims.

ผู้ผลิต: เบนินกา

หมายเลขชิ้นส่วน: Beninca Bull 624R KIT