คู่มือผู้ใช้ GODIYMODULES DC 12V 0.1s-99h รีเลย์หน่วงเวลาดิจิทัลมัลติฟังก์ชั่น

1. บทนำ

This manual provides detailed instructions for the installation, operation, and configuration of the GODIYMODULES DC 12V 0.1s-99h Multifunction Digital Time Delay Relay. This versatile module offers precise timing control for various applications, featuring multiple operating modes and a wide time delay range.

2. คุณสมบัติหลัก

• Multi-function relay module with 8 distinct operating modes.
• Adjustable time delay range from 0.1 seconds to 99 hours.
• Digital display for clear time and mode indication.
• Operates on DC 12V power supply.
• Integrated smart relay switch functionality.

3. ข้อมูลจำเพาะ

4. สินค้าหมดview

The time delay relay module features a compact design with clearly labeled terminals and control buttons. It includes a digital display for time and mode settings, a relay, and input/output terminals.

รูปที่ 4.1: ด้านหน้า view of the time delay relay module with key components labeled. This image shows the digital display, control buttons (SET, ADD, Enter), input terminals (IN, GND, VCC), and relay output terminals (NC, COM, NO).

รูปที่ 4.2: กลับ view of the time delay relay module, showing the solder points and circuit board layout.

5. การติดตั้งและการเดินสายไฟ

Proper wiring is essential for the safe and correct operation of the module. Ensure all connections are secure before applying power.

5.1. Common Wiring Diagram (Shared DC Power Supply)

This diagram illustrates how to connect the module and an equipment load when both share a common DC power supply.

รูปที่ 5.1: Wiring diagram showing the module connected to a DC power supply and an equipment load. DC+ and DC- from the power supply connect to the module's VCC and GND terminals, respectively. The trigger input is connected to the IN terminal. The equipment is connected to the relay's COM and NO (Normally Open) terminals, with the other side of the equipment connected to DC+.

5.2. Module Control AC Load Wiring Diagram

This diagram shows how to use the module to control an AC load, such as a 220V device. Note that the module itself is powered by DC 12V, but its relay can switch AC power.

รูปที่ 5.2: Wiring diagram for controlling an AC load. The module is powered by DC 12V (DC+ to VCC, DC- to GND). The trigger input connects to IN. The AC load (e.g., 220V equipment) is connected to the relay's COM and NO terminals, with the AC "Fire Wire" connected to one relay terminal and the "Zero Wire" connected to the other side of the equipment.

6. Operating Instructions and Modes

The module offers 8 distinct operating modes, adjustable from 0.1 seconds to 99 hours. Use the control buttons (SET, ADD, Enter) to configure the desired mode and time parameters.

6.1. Setting Time Unit

To select the T1 time unit, press the เพิ่ม button. The display will show a value (0/1/2/3). Press เพิ่ม again to cycle between the units:

• 0: Seconds (0.1s - 99.9s)
• 1: Seconds (1s - 999s)
• 2: Minutes (1min - 999min)
• 3: Hours (1h - 99h)

6.2. การเลือกโหมดการทำงาน

กดปุ่มค้างไว้ ชุด button for a long time to enter the function selection menu. The display will show P1-P8. Press the ชุด button briefly to switch between the 8 functions.

6.3. Detailed Mode Descriptions

รูปที่ 6.1: Visual representation of the 8 operating modes (P-1 to P-8) with their respective descriptions and functionalities.

1. P-1: Delayed Disconnection
   The relay is activated upon power-on. After a delay of T1, the relay disconnects.
2. P-2: Time-Delayed Absorption (Triggered)
   Upon power-on, the time delay T1 starts. After T1, the relay engages. A low-level signal on the IN terminal will re-trigger this function once.
3. P-3: Cyclic On/Off (Power-on Start)
   Upon power-on, the relay engages. After delay T1, the relay disconnects. After delay T2, the relay engages. This cycle repeats. The number of cycles can be adjusted from 1 to 99 or set for an infinite cycle.
4. P-4: Cyclic On-Off (Delay First, Power-on Start)
   Upon power-on, delay T1 starts. After T1, the relay engages. After delay T2, the relay disconnects. This cycle repeats. The number of cycles can be adjusted from 1 to 99 or set for an infinite cycle.
5. P-5: Trigger Delay Absorption (Repeatable)
   The relay is initially inactive. After a trigger signal, the relay activates. After delay T1, the relay disconnects. A low-level signal on the IN terminal will re-trigger this function. The cycle times can be adjusted from 1 to 99 or set for an infinite cycle.
6. P-6: Trigger Time-Delay Disconnect
   The relay is initially inactive. Upon triggering, the relay engages. After delay T1, the relay disconnects. A low-level signal on the IN terminal will re-trigger this function once.
7. P-7: Trigger Cycle On-Off (Repeatable)
   The relay is initially inactive. Upon triggering, the relay engages. After delay T1, it disconnects. After delay T2, it engages. This cycle repeats. The number of cycles can be adjusted from 1 to 99 or set for an infinite cycle.
8. P-8: Trigger Cycle On/Off (Delayed Start)
   The relay is initially inactive. Upon triggering, delay T1 starts. After T1, the relay engages. After delay T2, the relay disconnects. This cycle repeats. The number of cycles can be adjusted from 1 to 99 or set for an infinite cycle.

7. การบำรุงรักษา

The GODIYMODULES Time Delay Relay is designed for reliable operation with minimal maintenance. To ensure longevity and proper function:

• รักษาโมดูลให้สะอาด ปราศจากฝุ่นและความชื้น
• หลีกเลี่ยงการให้โมดูลสัมผัสกับอุณหภูมิที่สูงหรือต่ำเกินไปหรือแสงแดดโดยตรง
• ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นระยะเพื่อให้แน่ใจว่ามีความปลอดภัย
• Do not attempt to open or modify the module, as this may void any warranty and could lead to malfunction.

8 การแก้ไขปัญหา

If you encounter issues with your time delay relay module, consider the following common troubleshooting steps:

• โมดูลไม่เปิดเครื่อง: Verify that the DC 12V power supply is correctly connected to the VCC and GND terminals and is providing the correct voltage. Check for loose connections or damaged wires.
• Relay Not Activating/Deactivating:
  • Ensure the correct operating mode (P-1 to P-8) is selected.
  • Check the set time (T1, T2) and time unit.
  • If using a trigger, verify the trigger signal is being applied correctly to the IN terminal.
  • Confirm the load is correctly wired to the relay's COM, NO, or NC terminals.
• เวลาไม่ถูกต้อง: Double-check the set time values and the selected time unit (seconds, minutes, hours).
• ปัญหาการแสดงผล: If the digital display is blank or showing erratic characters, check the power supply and connections.

หากปัญหายังคงมีอยู่ โปรดติดต่อฝ่ายสนับสนุนลูกค้าเพื่อขอความช่วยเหลือเพิ่มเติม

9. การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the product packaging or contact GODIYMODULES customer service directly. Keep your purchase receipt as proof of purchase.