Refoss Smart Home Energy Monitor EM16 User Manual

1. บทนำและเรื่องอื่นๆview

The Refoss Smart Home Energy Monitor EM16 is designed to provide comprehensive and accurate real-time energy consumption data for your home or business. With support for various electrical systems and integration with smart home platforms like Home Assistant, it empowers users to optimize energy usage, identify inefficiencies, and potentially reduce electricity bills. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting.

คุณสมบัติที่สำคัญ ได้แก่:

• 24/7 Energy Monitoring: Track power, current, voltage และตัวประกอบกำลัง
• Multi-Circuit Support: 2 main circuit sensors (up to 200A each) and 16 branch circuit sensors (up to 60A each).
• Home Assistant Compatibility: Seamless integration for centralized control and automation.
• Solar Metering: Accurately monitor net metering for solar systems.
• ข้อมูลทางประวัติศาสตร์: Stores up to 3 years of detailed electricity usage data.
• Smart Consumption Alerts: Receive notifications for unusual energy spikes.

2. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่าสินค้าทั้งหมดมีอยู่ในแพ็คเกจของคุณ:

• Home Energy Monitor (EM16) x 1
• WiFi Antenna Assembly x 1
• 200A Current Transformers x 2
• 60A Current Transformers x 16
• 3.5mm Insulation Plugs x 2
• 2.5mm Insulation Plugs x 16
• น็อตลวด x 3
• Extra Wires x 3
• สายรัด x 1
• คู่มือการใช้งาน x 1

For a visual unboxing and first impressions, you may refer to this video:

3. ข้อมูลด้านความปลอดภัย

WARNING: Installation involves working with high voltage electricity. For safety reasons, Refoss strongly recommends having a professional electrician handle the installation.

• Always turn off the main power to your electrical panel before beginning any installation work.
• Ensure all circuits are de-energized before handling wires or components.
• Do not touch any exposed wires or live parts.
• ปฏิบัติตามรหัสและข้อบังคับด้านไฟฟ้าในท้องถิ่นทั้งหมด
• Take care when accessing the included current transformers and avoid bumping them to prevent damage.

4. การตั้งค่าและการติดตั้ง

This section provides detailed steps for installing your Refoss EM16 Smart Home Energy Monitor. For a comprehensive visual guide, please refer to the official installation video below.

4.1 การตั้งค่าเริ่มต้น

1. ปิดเครื่อง: Before starting, turn off the main circuit breaker to your electrical panel.
2. วางตัวเครื่องหลัก: Place the EM16 main unit in the electrical panel. Ensure it is at least 2 inches away from any live parts, excluding insulated components.
3. ติดตั้งเสาอากาศ: Create a small hole in the electrical panel to thread the antenna cable through. Insert the antenna cable into the labeled jack at the top of the energy monitor and tighten securely. Make sure the antenna is not enclosed within the panel, as this can cause signal interference.
4. Plug in the Wire Harness: Insert the power harness into the top of the energy monitor until it snaps securely into place. This harness allows access to single-phase power, two-phase power, and three-phase power.

4.2 Wire Identification

Before connecting the current transformers, identify your electricity type:

• Single-phase, 3-wire systems: Typically have two hot wires (black and red) and one neutral wire (white). Common in U.S. residences, providing 240 volts (between the two hot wires) and 120 volts (between either hot wire and the neutral wire).
• Single-phase, 2-wire systems: Typically have one hot wire (black or red) and one neutral wire (white).
• Three-phase, 4-wire Wye systems: Typically have three hot wires (usually black, red, and blue) and one neutral wire (white). Common in commercial and industrial applications, not typical in residential settings.

Observe the main circuit breaker's rating to confirm your system type:

• Single-phase, 3-wire systems: The main circuit breaker is usually a 240-volt breaker.
• Single-phase, 2-wire systems: The main circuit breaker is typically a 120-volt breaker.
• Three-phase, 4-wire Wye systems: The main circuit breaker is typically a three-phase breaker and has a higher current rating.

4.3 Wiring Method (Example: Single-phase, 3-wire Systems)

This section demonstrates the installation using a single-phase, 3-wire system. For other wiring configurations, please refer to the provided video or consult a professional electrician.

1. Connect the Neutral Wire: Connect the white wire from the power harness to the neutral bus bar in your electrical panel.
2. Connect LA (Black Wire): Connect the black wire from the power harness to the A-phase circuit breaker. This provides power to the equipment and monitors the A-phase voltage. Snap the corresponding 60A current transformers (A1-A6) onto the A-phase wires to monitor the current.
3. Connect LB (Red Wire): Connect the red wire from the power harness to the B-phase circuit breaker. This monitors the B-phase voltage. Snap the corresponding 60A current transformers (B1-B6) onto the B-phase wires to monitor the current.
4. Connect LC (Blue Wire): If more circuits need to be monitored on the A-phase, connect the blue wire from the power harness to the A-phase circuit breaker. This monitors the A-phase voltage. Snap the corresponding 60A current transformers (C1-C6) onto the A-phase wires to monitor the current.

Important Note on Current Direction:

• When installing the current transformer, please pay attention to its orientation.
• For general consumption monitoring, ensure that the current direction is from K to L (arrow points away from the breaker).
• When monitoring the wiring of your solar feeder, ensure that the current direction is from L to K (arrow points towards the breaker).
• If the reading is opposite to the expected value (e.g., negative power), simply reverse the connection direction of the current transformer.

Connection Correspondence Table:

In addition, ensure the current transformer is correctly matched with its respective voltage collection line.

4.4 Insulate Empty Ports

Securely insert the supplied 2.5 mm insulation plugs into each empty port on the EM16 to ensure complete insulation.

4.5 เปิดเครื่อง

Before covering your panel, take photos of the installation for your records or in case you need to contact support.

Restore power to all circuits by reattaching the electrical box panel and turning on all circuit breakers that were turned off during installation.

The unit's green LED should begin to flash slowly after 2 seconds. If the LED is flashing slowly, the unit is ready for configuration. If the LED is not blinking normally, press and hold the reset button for 5 seconds to reinitialize the unit.

4.6 Complete App Setup

Download the Refoss app from your device's app store. Open the Refoss app and follow the on-screen instructions to add a discovered device via Bluetooth pairing. Enter your 2.4GHz Home Wi-Fi password to connect your device to your home network. Once connected, your Smart Energy Monitor is successfully installed.

The EM16 Wi-Fi Energy Monitor is compatible with Home Assistant. Simply update the firmware in the Refoss app to seamlessly integrate your energy management system with your smart home platform, enabling centralized control and automation. All data is stored locally, ensuring your privacy is protected without cloud processing.

For detailed instructions on Home Assistant integration, please refer to the official PDF guide: Home Assistant Integration Guide

5. คู่มือการใช้งาน

Once installed and configured, you can monitor and manage your home's energy consumption anytime, anywhere via the Refoss app.

• 24/7 Energy Monitoring: Easily monitor the power, current, voltage, and power factor of major appliances. Quickly identify which devices are running efficiently and which ones might be wasting electricity.
• Comprehensive Energy Data: The power monitor provides 98% accuracy and stores up to 3 years of detailed electricity usage data. View clear minute, hour, day, month, and year consumption and cost charts. Historical data can also be exported for further analysis.
• Smart Consumption Alerts: Set personalized usage targets for each circuit. Receive immediate alert notifications when power consumption reaches a set value, allowing you to take prompt action.
• Zero Feed-In Automation (for Solar Owners): The EM16 links with Home Assistant to automate your zero feed-in strategy. Detect solar surplus and automatically power high-energy appliances to consume excess solar energy onsite, maximizing solar investment returns.

6. การบำรุงรักษา

• การตรวจสอบปกติ: Periodically inspect all wiring and connections within the electrical panel to ensure they are secure.
• อัพเดตเฟิร์มแวร์: Ensure your Refoss app and device firmware are updated to the latest versions for optimal performance and new features. Firmware updates can be performed directly through the Refoss app.
• การทำความสะอาด: Keep the EM16 unit and surrounding area clean and free of dust. Use a dry, soft cloth for cleaning.

7 การแก้ไขปัญหา

• Negative CT Readings: If your current transformer (CT) is showing a negative value, this may arise from incorrect wiring or settings. Fix it by inverting the current direction via the 'Circuit Factor' page in device settings within the Refoss app. No need to physically alter the current transformer. A firmware update may be required for this feature.
• LED Not Blinking Normally: If the green LED on the unit is not blinking slowly after power-on, press and hold the reset button for 5 seconds to reinitialize the unit.
• ไม่มีข้อมูลในแอป: Ensure the unit is properly connected to your Wi-Fi network. Check the Wi-Fi antenna connection and ensure it's not enclosed within the panel. Verify all current transformers are securely fastened and plugged into the correct ports.
• การอ่านค่าที่ไม่ถูกต้อง: Ensure all current transformers are correctly oriented (K to L for consumption, L to K for solar feed-in). Check that the correct current transformer is matched with its respective voltage collection line as per the correspondence table.

8. ข้อมูลจำเพาะ

• ผู้ผลิต: รีฟอสส์
• หมายเลขชิ้นส่วน: เอ็ม16
• น้ำหนักสินค้า: 4.27 ปอนด์
• ขนาดสินค้า : 4.5 x 3.48 x 1.1 นิ้ว
• ประเทศต้นกำเนิด: จีน
• สี: Orange+White
• จำนวนแพ็คเกจสินค้า: 1
• แหล่งจ่ายไฟ: 100-240 โวลต์~, 50/60 เฮิรตซ์
• Current Transformer Ratings: 200A (main), 60A (branch)
• ความแม่นยำ: 98%
• การจัดเก็บข้อมูล: สูงถึง 3 ปี

9. การรับประกันและการสนับสนุน

The Refoss Smart Home Energy Monitor EM16 includes a 2-year warranty.

For any questions or support needs, please contact the Refoss support team. You can find contact information within the Refoss app under the 'Support' or 'Help' section, or visit the official Refoss webเว็บไซต์.