OONO DIN Rail Mount 16 LEDs Indicator Light Module

การแนะนำ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your OONO DIN Rail Mount 16 LEDs Indicator Light Module. This module is designed for industrial and electrical applications, offering clear visual indication with 16 independent LED channels. Please read this manual thoroughly before use to ensure proper and safe operation.

ข้อมูลด้านความปลอดภัย

• ควรตัดกระแสไฟก่อนทำการติดตั้ง เดินสาย หรือบำรุงรักษาโมดูลทุกครั้ง
• ตรวจสอบให้แน่ใจว่าการเดินสายไฟทั้งหมดเป็นไปตามข้อกำหนดด้านไฟฟ้าของท้องถิ่นและระดับประเทศ
• This module operates with DC voltage. Verify correct polarity before applying power.
• ห้ามใช้เกินปริมาตรการทำงานที่กำหนดไว้tagมีช่วงการทำงานตั้งแต่ 5VDC ถึง 50VDC
• Avoid exposing the module to excessive moisture, dust, or extreme temperatures.
• เฉพาะบุคลากรที่มีคุณสมบัติเหมาะสมเท่านั้นที่ควรดำเนินการติดตั้งและเดินสายไฟ

สินค้าเกินview

The OONO D-1003T Series is a 16-channel LED indicator light module featuring 5mm blue LEDs. It supports both Common Positive and Common Negative control modes, making it versatile for various circuit designs. The module is equipped with 5.0mm pitch screw terminal blocks for secure wire connections and comes with a high-quality fireproof nylon DIN rail mount carrier.

คุณสมบัติหลัก:

• 16 independent LED indicator channels.
• ปริมาณการใช้งานที่กว้างtage range: 5VDC to 50VDC.
• Supports Common Positive and Common Negative control.
• Robust 5.0mm pitch screw terminal blocks.
• DIN rail mountable (35mm, 32mm, 15mm compatible) with detachable carrier for panel mounting.
• FR-4 fiber glass PCB for durability.

ส่วนประกอบ:

• 16 x 5mm Blue LEDs
• Input Terminal Blocks (Channels 1-8, 9-16, COM)
• DIN Rail Mount Carrier
• FR-4 PCB

รูปที่ 1: จากบนลงล่าง view of the 16-LED indicator module, showing the LED array and terminal blocks.

Figure 2: Angled perspective of the module, highlighting its compact design and integrated DIN rail mounting mechanism.

ข้อมูลจำเพาะ

Figure 3: Detailed dimensional drawing of the module, showing key measurements in millimeters.

การติดตั้งและการตั้งค่า

อะไรอยู่ในกล่อง:

• 1 x DIN rail mount indicator light module

Mounting the Module:

The module is designed for easy installation on standard DIN rails (35mm, 32mm, or 15mm). The carrier can also be detached for panel mounting applications.

1. การติดตั้งราง DIN: Align the module's clips with the DIN rail. Press down firmly until the module snaps securely onto the rail. Ensure it is seated properly and does not wobble.
2. การติดตั้งแผง: The DIN rail carrier can be disassembled from the main PCB. Once detached, the PCB can be mounted directly to a panel using appropriate standoffs or screws (not included).

Figure 4: The indicator module securely mounted on a standard DIN rail, ready for wiring.

คำแนะนำในการเดินสายไฟ:

The module features 5.0mm pitch screw terminal blocks for connecting input signals. Each LED channel (1-16) has a dedicated input terminal, and there is a common (COM) terminal.

1. เตรียมสายไฟ: Strip approximately 7mm (0.28 inches) of insulation from the ends of your wires (26 to 12AWG / 2.5mm²).
2. เชื่อมต่ออินพุต: Loosen the screws on the desired terminal blocks. Insert the stripped wire ends fully into the terminal openings. Tighten the screws to secure the wires. Gently tug on the wires to ensure a firm connection.
3. Common Connection: Connect the common return path of your control circuit to the "COM" terminal.

รูปที่ 5: ระยะใกล้ view of the screw terminal blocks, indicating channel numbers and the common terminal.

โหมดการทำงาน

The OONO D-1003T Series supports both Common Positive and Common Negative control configurations. This flexibility allows integration into various existing control systems.

Common Positive Control:

In this mode, the "COM" terminal is connected to the positive supply voltage. Each individual channel terminal (1-16) is then connected to the negative side of the control signal. When a channel's input is pulled low (connected to ground or negative supply), the corresponding LED will illuminate.

• Connect the positive supply (e.g., +5VDC to +50VDC) to the คอม เทอร์มินัล.
• Connect the negative side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the negative potential.

Common Negative Control:

In this mode, the "COM" terminal is connected to the negative supply voltage (ground). Each individual channel terminal (1-16) is then connected to the positive side of the control signal. When a channel's input is pulled high (connected to positive supply), the corresponding LED will illuminate.

• Connect the negative supply (e.g., Ground) to the คอม เทอร์มินัล.
• Connect the positive side of your control signal for each channel (1-16) to its respective input terminal.
• LED illuminates when the input terminal is connected to the positive potential.

Figure 6: Internal circuit diagram illustrating the connection of LEDs and resistors to the input and common terminals.

การซ่อมบำรุง

The OONO DIN Rail Mount 16 LEDs Indicator Light Module is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.

• การทำความสะอาด: If necessary, gently wipe the module with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
• ตรวจสอบการเชื่อมต่อ: Periodically inspect terminal block screw connections to ensure they remain tight and secure. Loose connections can lead to intermittent operation or damage.
• สภาพแวดล้อม : Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature component degradation.

การแก้ไขปัญหา

การรับประกันและการสนับสนุน

For warranty information and technical support, please refer to the official OONO website or contact your authorized distributor. Keep your purchase receipt as proof of purchase for any warranty claims.

ผู้ผลิต: CZH-LABS

ยี่ห้อ: อูโน่

หากต้องการความช่วยเหลือเพิ่มเติม คุณสามารถไปที่ OONO Store on Amazon.