YIHUA Pyrography Tips Set Instruction Manual

1. สินค้าหมดview

This YIHUA Pyrography Tips Set provides a comprehensive collection of 23 distinct tips designed for various wood burning and pyrography applications. These tips are crafted to offer precision and versatility, allowing users to achieve a wide range of artistic effects, from fine lines and shading to broad strokes and intricate details. The set is intended for use with specific YIHUA pyrography stations.

Image 1.1: The YIHUA Pyrography Tips Set, including various metal tips, a small wooden board, and a storage tin.

ส่วนประกอบที่รวมอยู่:

• 23 x Assorted Pyrography Tips
• Storage Container (may vary)

2. ความเข้ากันได้

Important: This Pyrography Tips Set is specifically designed for the following YIHUA Wood Burning Pyrography Stations:

• YIHUA 939 II
• YIHUA 939D-II
• YIHUA 939-III
• อี้หัว 939D-V
• YIHUA 939D-VI
• YIHUA 939D-VII
• YIHUA 939-V
• YIHUA 939-VI

Please verify your station model number before attempting to use these tips. Using these tips with incompatible models may result in damage to the tips, the station, or personal injury. If you are uncertain about compatibility, please contact YIHUA customer support for assistance.

3. การตั้งค่าและการติดตั้ง

Proper installation of pyrography tips is crucial for safe and effective operation. Always ensure your pyrography station is turned off and completely cooled before handling tips.

1. ปิดเครื่องและระบายความร้อน: Ensure your YIHUA pyrography station is powered off and unplugged. Allow the handpiece and any previously used tips to cool down completely to prevent burns.
2. เลือกเคล็ดลับ: Choose the desired pyrography tip from the set based on your artistic needs.
3. เคล็ดลับการติดตั้ง: Carefully insert the base of the chosen tip into the designated receptacle on your pyrography handpiece. Ensure the tip is seated firmly and securely. Do not force the tip.
4. ตรวจสอบการเชื่อมต่อ: Gently tug on the tip to confirm it is properly secured and will not loosen during use.
5. เปิดเครื่อง: Once the tip is securely installed, you may plug in and power on your pyrography station.

Safety Note: Never attempt to change tips while the station is powered on or hot. Always use appropriate heat-resistant gloves if handling tips that may still be warm.

4. คู่มือการใช้งาน

These tips are designed to be used with compatible YIHUA pyrography stations. Refer to your station's instruction manual for detailed operating procedures, temperature settings, and safety guidelines.

• การควบคุมอุณหภูมิ: Adjust the temperature on your pyrography station according to the type of wood or material you are working on and the desired effect. Start with lower temperatures and gradually increase as needed.
• ฝึกฝน: Before working on your final project, practice on scrap pieces of the same material to familiarize yourself with the tip's performance and temperature requirements.
• การระบายอากาศ : Always work in a well-ventilated area to avoid inhaling fumes produced during wood burning.
• มือที่มั่นคง: Maintain a steady hand and consistent pressure for even burning.
• การเลือกเคล็ดลับ: Experiment with different tips to achieve various textures, lines, and shading effects.

Caution: Pyrography tips become extremely hot during operation. Avoid direct contact with skin or flammable materials. Always place the hot handpiece in its designated stand when not in use.

5. การบำรุงรักษาและการดูแล

Proper maintenance extends the life of your pyrography tips and ensures consistent performance.

• เคล็ดลับการทำความสะอาด: After each use, and once the tips have completely cooled, gently clean them to remove carbon buildup. A brass brush or fine-grit sandpaper can be used. Avoid abrasive cleaners or harsh chemicals.
• การตรวจสอบ: Regularly inspect tips for any signs of wear, bending, or damage. Replace damaged tips immediately to prevent inconsistent results or potential hazards.
• พื้นที่จัดเก็บ: Store the tips in their original container or a dry, secure place to protect them from damage and corrosion. Keep them away from moisture and extreme temperatures.
• หลีกเลี่ยงความร้อนมากเกินไป: Prolonged use at excessively high temperatures can shorten the lifespan of the tips. Use the lowest effective temperature for your projects.

6 การแก้ไขปัญหา

If you encounter issues with your pyrography tips, consider the following common solutions:

If problems persist after attempting these solutions, please contact YIHUA customer support.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

For information regarding warranty coverage, returns, or technical support for your YIHUA Pyrography Tips Set, please refer to the documentation provided with your original purchase or contact YIHUA customer service directly.

โดยทั่วไป คุณสามารถค้นหาข้อมูลการติดต่อฝ่ายสนับสนุนได้จากเว็บไซต์อย่างเป็นทางการของผู้ผลิต webไซต์หรือผ่านร้านค้าปลีกที่ซื้อผลิตภัณฑ์

หมายเหตุ: เงื่อนไขการรับประกันและตัวเลือกการสนับสนุนอาจแตกต่างกันไปตามภูมิภาคและผู้ค้าปลีก