การแนะนำ
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ECOELER YWT102 Countdown Timer Switch. This in-wall timer switch is designed to automatically turn off connected loads such as lights, ceiling fans, bathroom fans, and heaters after a preset time, contributing to energy savings and convenience. It features multiple preset countdown options and a manual override function.

Image: The ECOELER Countdown Timer Switch in Ivory, shown as a 2-pack.
คุณสมบัติผลิตภัณฑ์
- 8 Pre-Set Options: Offers countdown settings of 1 minute, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours.
- การแทนที่ด้วยตนเอง: Allows instant ON/OFF control, overriding any active countdown.
- การประหยัดพลังงาน: Automatically turns off loads, preventing accidental energy waste. Ideal for lights, ceiling fans, bathroom fans, and heaters.
- การดำเนินการที่เรียบง่าย: Features Countdown mode and Constant On mode. Select time with a button press; hold ON/OFF for 5 seconds to activate Constant On.
- ไฟแสดงสถานะ LED: An always-on LED light makes the switch easy to locate in low-light conditions.
- การประยุกต์ใช้ที่กว้าง: Suitable for bathrooms, closets, pantries, garages, laundry rooms, spas, and enclosed patios.
- ปลอดภัยและเชื่อถือได้: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).

ภาพ: รายละเอียด view of the ECOELER Countdown Timer Switch buttons and LED indicator labels, highlighting its features.
เนื้อหาแพ็คเกจ
Upon opening your ECOELER Countdown Timer Switch package, you should find the following items:
- ECOELER YWT102 Countdown Timer Switch
- แผ่นปิดผนังที่เข้าชุดกัน
- ลวดถั่ว
- คู่มือคำแนะนำในการติดตั้ง

Image: The ECOELER Countdown Timer Switch, wire nuts, and face plate, along with product dimensions.
ข้อมูลด้านความปลอดภัย
คำเตือน: To prevent serious injury or death from electric shock, always turn OFF the power at the circuit breaker or fuse box before wiring. This device is intended for installation in accordance with the National Electric Code and local regulations. Use copper wires only. If you are unsure about any part of these instructions, consult a qualified electrician.
ข้อมูลจำเพาะ
| ข้อมูลจำเพาะ | ค่า |
|---|---|
| ยี่ห้อ | อีโคเลอร์ |
| หมายเลขรุ่น | YWT102 |
| สี | งาช้าง |
| ขนาดสินค้า | 4.19 x 3.71 x 11.99 ซม. |
| อำนาจ/วัดtage | 1800 วัตต์ |
| วัสดุ | Copper, Metal, Polycarbonate |
| น้ำหนักสินค้า | 136 กรัม |
| โหมดการทำงาน | เปิดปิด |
| คะแนนปัจจุบัน | 15 Amps |
| ปฏิบัติการฉบับที่tage | 120 โวลต์ (AC) |
| ประเภทการติดต่อ | เปิดปกติ |
| ประเภทสวิตซ์ | ปุ่มกด |
| เทอร์มินัล | สายนำไฟฟ้า |
การติดตั้ง
Follow these steps carefully to install your ECOELER Countdown Timer Switch. If you are not comfortable performing electrical work, please consult a qualified electrician.
ก่อนการติดตั้ง
- ปิดเครื่อง: Locate your circuit breaker panel and turn off the power to the switch box where you will be installing the timer. Verify that the power is off using a voltagอีผู้ทดสอบ
- ลบสวิตช์ที่มีอยู่: Carefully remove the screws holding the existing wall plate and switch. Gently pull the switch out of the wall box.
- ระบุสายไฟ: Identify the wires connected to your existing switch. Typically, you will find:
- Hot Wire: โดยปกติจะเป็นสายสีดำ แสดงว่าสายไฟมาจากเบรกเกอร์วงจร
- สายโหลด: Usually black or red, carries power to the light/fan.
- สายนิวทรัล: มักจะขาว A neutral wire is required for this timer switch.
- สายดิน: โดยทั่วไปจะเป็นสีเขียวหรือสีทองแดงเปลือย
การเชื่อมต่อสายไฟ
Connect the wires from the wall box to the ECOELER Countdown Timer Switch as follows:

Image: Wiring diagram for the ECOELER Countdown Timer Switch, illustrating connections for Load (Red), Hot (Black), Ground (Green), and Neutral (White) wires. Note: Neutral Wire Must Be Required.
- เชื่อมต่อ สายสีแดง from the timer to the โหลดลวด from the wall box using a wire nut.
- เชื่อมต่อ สายสีดำ from the timer to the ลวดร้อน from the wall box using a wire nut.
- เชื่อมต่อ สายสีขาว from the timer to the สายนิวทรัล from the wall box using a wire nut.
- เชื่อมต่อ สายสีเขียว from the timer to the สายดิน from the wall box using a wire nut.
หลังการติดตั้ง
- Carefully push all wires back into the wall box.
- Secure the timer switch to the wall box with the provided screws.
- Attach the new wall plate over the timer switch.
- คืนค่าพลัง: Return to your circuit breaker panel and turn the power back ON.
คำแนะนำการใช้งาน
The ECOELER Countdown Timer Switch offers two primary operating modes: Countdown Mode and Constant On Mode.
โหมดนับถอยหลัง
To activate a countdown:
- Press the desired time button (1 Min, 5 Min, 10 Min, 15 Min, 30 Min, 60 Min, 2 Hour, or 4 Hour).
- The corresponding LED indicator will illuminate, and the countdown will begin.
- The connected load (light, fan, etc.) will turn off automatically once the selected time expires.
- To cancel a countdown manually, press the large ON/OFF button at the bottom.
Constant On Mode (Manual Override)
To keep the connected load continuously ON, bypassing the timer function:
- Press and hold the large ON/OFF button at the bottom for more than 5 seconds.
- The load will remain ON until the ON/OFF button is pressed again to turn it off.

Image: The ECOELER Countdown Timer Switch with its LED indicator illuminated, making it visible in a dark environment.
การซ่อมบำรุง
The ECOELER Countdown Timer Switch requires minimal maintenance. To ensure optimal performance and longevity:
- Keep the switch and wall plate clean by wiping with a soft, damp ผ้า หลีกเลี่ยงน้ำยาทำความสะอาดหรือตัวทำละลายที่มีฤทธิ์กัดกร่อน
- ตรวจสอบให้แน่ใจว่าสวิตช์ไม่ได้สัมผัสกับความชื้นมากเกินไปหรืออุณหภูมิที่สูงเกินไป
- Periodically check the connections for any signs of loosening, though this should only be done with the power turned off at the circuit breaker.
การแก้ไขปัญหา
If you encounter issues with your ECOELER Countdown Timer Switch, consider the following:
- สวิตช์ไม่ตอบสนอง: Ensure the power is ON at the circuit breaker. Check all wire connections for tightness.
- Load Not Turning Off: Verify that the switch is not in Constant On mode (manual override). If it is, press the ON/OFF button to turn it off.
- ไฟแสดงสถานะ LED ไม่ติดสว่าง: Check power supply and connections. If the switch is functioning otherwise, the LED might be faulty, but this is rare.
- การทำงานเป็นระยะ: Ensure all wire connections are secure. Loose connections can cause inconsistent performance.
หากปัญหายังคงอยู่หลังจากตรวจสอบตามขั้นตอนเหล่านี้แล้ว โปรดติดต่อฝ่ายบริการลูกค้า
การรับประกันและการสนับสนุน
The ECOELER Countdown Timer Switch comes with a รับประกัน 1 ปี. For any questions, technical assistance, or warranty claims, please contact ECOELER customer support. You can reach us via email at SUPPORTS@ECOELER.COMเราตั้งเป้าที่จะตอบข้อซักถามทั้งหมดภายใน 24 ชั่วโมง
Manufacturer: ECOELER ELECTRIC INC
