คู่มือผู้ใช้เครื่องพิมพ์ 3 มิติ Sovol SV08 Core-XY

การแนะนำ

The Sovol SV08 is a high-speed Core-XY 3D printer designed for efficient and precise additive manufacturing. Based on the open-source Voron 2.4 project, it features advanced kinematics, a powerful hotend, and intelligent leveling systems to deliver exceptional print quality and speed. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your SV08 3D printer.

Figure 1: The Sovol SV08 Core-XY 3D Printer, showcasing its robust frame and large build volume.

คู่มือการติดตั้ง

1. แกะกล่องและประกอบ

The Sovol SV08 comes 90% pre-assembled, significantly reducing setup time compared to fully self-assembled kits. Typical assembly time is approximately one hour. Carefully remove all components from the packaging, ensuring no parts are left behind. Refer to the included quick start guide for detailed assembly steps.

รูปที่ 2: ระเบิด view diagram illustrating the main components and their assembly points for the SV08 printer.

2. การเปิดเครื่องและการเชื่อมต่อครั้งแรก

Once assembled, connect the printer to a power source. The SV08 supports LAN connectivity via WiFi or an Ethernet port, enabling convenient remote interaction and access to various features. Ensure your network is stable for optimal performance.

Figure 3: Illustration of the SV08's remote control capabilities via computer and mobile device, highlighting network connectivity.

3. การติดตั้งซอฟต์แวร์

The SV08 is compatible with open-source slicers like OrcaSlicer and Cura. OrcaSlicer is recommended for its optimized nozzle paths, intelligent cooling, and user-friendly interface. Install the chosen slicing software on your computer to prepare 3D models for printing.

Figure 4: Screenshot of the OrcaSlicer software interface, showing print settings and a 3D model ready for slicing.

คำแนะนำการใช้งาน

1. กำลังโหลดเส้นใย

Ensure the hotend is preheated to the appropriate temperature for your filament type. Insert the filament into the extruder until it is gripped by the gears. Follow the on-screen prompts or manual instructions to load the filament completely through the hotend until it extrudes smoothly.

2. Bed Leveling and Z-Offset

The SV08 features Quad-Gantry Auto Leveling (QGL) with 4 independent Z motors, enhancing accuracy and reducing print failures. A pressure sensor automatically adjusts the distance between the nozzle and the build plate. Perform a quick test print after initial setup to ensure optimal first-layer adhesion.

Figure 5: Diagram illustrating the Quad-Gantry-Leveling (QGL) process with four independent Z motors for precise bed calibration.

Figure 6: Visual representation of Adaptive Area Detection, showing how the printer compensates for leveling based on the print model's projection.

3. การเริ่มพิมพ์

After slicing your model and ensuring the printer is ready, initiate the print from the printer's control panel or via remote access. Monitor the first layer to confirm proper adhesion and adjust Z-offset if necessary.

4. คุณสมบัติหลักและประสิทธิภาพ

• CoreXY Kinematics: The SV08 utilizes CoreXY kinematics for reduced moving mass and enhanced motion control, achieving a maximum acceleration of 40000mm/s² and print speeds up to 700mm/s.


Figure 7: Visual highlighting the Core-XY system and its capability for 700mm/s maximum print speed and 40000mm/s² acceleration.

• Integrated Hotend & AC Power Heated Bed: The high-performance hotend reaches 300°C quickly, and the AC heated bed reduces preheat time by 70%, allowing for almost instant printing.

Figure 8: Diagram showing the integrated hotend and the AC power heated bed, emphasizing rapid heating capabilities.
• Rapid Filament Cooling: Equipped with a 5020 fan (10000r/min) and a 3010 fan (15000r/min), the optimized airflow from three sides ensures sufficient cooling during rapid printing, improving print quality and reducing warping.


รูปที่ 9: โปร่งใส view of the cooling system, illustrating the powerful fans and optimized airflow for filament cooling.

• All-axis Linear Rails: The SV08 utilizes linear rails for all 7 axes (4Z+2Y+1X) to improve precision and resistance to axial movement deformation, ensuring smooth and accurate motion for high-quality prints.


รูปที่ 10: รายละเอียด view of the linear rail system, showing the components that enable precise and smooth movement across all axes.

• เฟิร์มแวร์ Klipper: The Klipper firmware enhances processing speed and enables features like 'Input Shaping' to minimize vibration patterns and 'Pressure Advance' to ensure flawless prints and reduce temperature fluctuations.

Figure 11: Comparison images demonstrating the improvement in print quality with Klipper's Pressure Advance and Input Shaping features.
• Built-in Camera & Remote Control: Monitor printing in real-time and capture time-lapse footage with the integrated camera. Remote control is available via LAN (WiFi or Ethernet).


รูปที่ 12: ระยะใกล้ views of the built-in time-lapse camera, planetary gear extruder, and pressure sensor for Z-offset compensation.

การซ่อมบำรุง

Regular maintenance ensures the longevity and optimal performance of your Sovol SV08 3D printer.

• Print Bed Cleaning: After each print, allow the build plate to cool and remove any residual filament. Clean the surface with isopropyl alcohol to maintain good adhesion.
• การบำรุงรักษาหัวฉีด: Periodically inspect the nozzle for wear or clogs. Perform cold pulls or use a cleaning needle to clear blockages. Replace the nozzle if it shows significant wear.
• Linear Rail Lubrication: Apply a small amount of appropriate lubricant to the linear rails every few months or as needed to ensure smooth movement and prevent wear.
• การทำความสะอาดพัดลม: Use compressed air to clear dust and debris from the cooling fans (hotend, part cooling, and power supply fans) to ensure efficient cooling.

การแก้ไขปัญหา

This section addresses common issues you might encounter with your SV08 3D printer.

Common Print Quality Issues:

• การยึดเกาะชั้นแรกไม่ดี:
  • Ensure the build plate is clean and free of oils.
  • Verify the Z-offset is correctly calibrated; the nozzle should be just touching the bed.
  • Increase bed temperature slightly if using materials prone to warping.
• การเกิดเส้นใย/การไหลเยิ้ม:
  • Check retraction settings in your slicer (length and speed).
  • Ensure filament is dry; moist filament can cause stringing.
  • Adjust print temperature; printing too hot can lead to oozing.
• การบิดเบี้ยว:
  • Ensure proper bed adhesion (clean bed, correct Z-offset, adhesive if needed).
  • เพิ่มอุณหภูมิของที่นอน
  • Reduce cooling fan speed for the first few layers, especially with materials like ABS or PETG.
  • Consider using a brim or raft in your slicer.

อัพเดตเฟิร์มแวร์:

Periodically check the official Sovol website for the latest Klipper firmware updates. Follow the provided instructions carefully to ensure a successful update and access to new features or bug fixes.

ข้อมูลจำเพาะ

Figure 13: A comprehensive table outlining the technical specifications of the Sovol SV08 3D printer.

การรับประกันและการสนับสนุน

Sovol is committed to providing quality products and customer satisfaction. For any technical assistance, warranty claims, or support inquiries, please contact the Sovol customer service team. Detailed contact information can typically be found on the official Sovol webเว็บไซต์หรือผ่านแพลตฟอร์มการซื้อของคุณ

The product comes with a standard return policy of 30 days from the date of purchase for refund or replacement, as per the seller's terms.