1. บทนำ
This manual provides essential instructions for the proper installation, operation, and maintenance of your Akitas C10/C10 Turbo Vacuum Cleaner Pre-Filter Set. Please read this manual thoroughly before use to ensure optimal performance and longevity of your vacuum cleaner and filters. This pre-filter set is designed to capture fine dust and particles, protecting the vacuum motor and maintaining suction efficiency.
2. ข้อมูลด้านความปลอดภัย
- ต้องตรวจสอบให้แน่ใจเสมอว่าเครื่องดูดฝุ่นอยู่ ถอดปลั๊ก from the power source before attempting to install, remove, or clean filters.
- Handle filters with care to avoid damage. Damaged filters may compromise vacuum performance and air quality.
- Use only genuine Akitas replacement filters for your C10/C10 Turbo vacuum cleaner to ensure compatibility and performance.
- เก็บตัวกรองให้พ้นมือเด็ก
3. เนื้อหาบรรจุภัณฑ์
Your Akitas C10/C10 Turbo Pre-Filter Set package should contain the following items:
- 1x Washable Foam Pre-Filter (Black)
- 1x Washable Mesh Pre-Filter (White with Orange Rim)
This image displays the Akitas C10/C10 Turbo pre-filter set. It includes a circular black foam filter and a circular white mesh filter with a bright orange outer ring, designed to work together in your vacuum cleaner.
4. การตั้งค่าและการติดตั้ง
Follow these steps to install the pre-filter set into your Akitas C10 or C10 Turbo vacuum cleaner:
- ปิดเครื่องและถอดปลั๊ก: Ensure your vacuum cleaner is turned off and unplugged from the electrical outlet before proceeding.
- ค้นหาช่องกรอง: Refer to your vacuum cleaner's main instruction manual to locate the pre-filter compartment. This is typically near the dustbin.
- ลบตัวกรองเก่า: Carefully remove the existing pre-filters. Dispose of them responsibly if they are no longer usable.
- แทรกตัวกรองใหม่:
- First, place the white mesh pre-filter (with the orange rim) into the designated slot. Ensure it sits securely.
- Next, place the black foam pre-filter on top of the mesh filter. Ensure it is properly aligned and seated.
- ปิดช่อง: Securely close the filter compartment cover. Ensure it clicks into place to prevent air leaks.
- พร้อมใช้งาน: Your vacuum cleaner is now ready for operation with the new pre-filter set installed.
5. ข้อควรพิจารณาในการดำเนินงาน
The pre-filter set functions automatically once correctly installed. For optimal vacuum performance:
- Ensure both the foam and mesh filters are always present and correctly seated before operating the vacuum.
- Regularly check the filters for visible dirt and debris, especially after heavy use.
- Do not operate the vacuum cleaner without the pre-filter set installed, as this can damage the motor and void your warranty.
6. การบำรุงรักษาและการทำความสะอาด
The Akitas C10/C10 Turbo pre-filters are washable, allowing for extended use. Follow these cleaning instructions:
- ลบตัวกรอง: Turn off and unplug the vacuum. Open the filter compartment and carefully remove both the foam and mesh filters.
- ล้าง: Rinse the filters under cool, running water until the water runs clear. Gently squeeze the foam filter to remove excess water and dirt. Do not twist or wring the filters forcefully.
- การทำให้แห้งด้วยอากาศ: Allow both filters to air dry completely for at least 24 hours before re-installing them. Do not use a dryer or direct heat, as this can damage the filter material. Ensure they are bone dry to prevent mold or mildew growth and to maintain vacuum performance.
- ติดตั้งใหม่: Once completely dry, re-install the filters as described in the "Setup and Installation" section.
บันทึก: The frequency of cleaning depends on usage. For optimal performance, clean the filters every 2-4 weeks or when you notice a decrease in suction power. Replace filters every 3-6 months, or sooner if they show signs of wear or damage.
7 การแก้ไขปัญหา
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| ลดพลังดูด | ตัวกรองสกปรกหรืออุดตัน | Clean the pre-filters as per the "Maintenance and Cleaning" section. Ensure they are completely dry before re-installation. |
| Unpleasant Odor from Vacuum | Filters are not completely dry after washing, leading to mold/mildew. | Ensure filters are thoroughly air-dried for at least 24 hours. If odor persists, replace the filters. |
| Filters do not fit correctly | Incorrect filter type or improper installation. | Verify you have the correct Akitas C10/C10 Turbo pre-filter set. Re-install filters carefully, ensuring proper alignment. |
8. ข้อมูลจำเพาะ
- ยี่ห้อ: อากิตะ
- หมายเลขรุ่น: C10Prefilter
- อุปกรณ์ที่รองรับ: Akitas C10, Akitas C10 Turbo Vacuum Cleaners
- วัสดุ: Cotton (Foam and Mesh)
- ขนาดสินค้า : ขนาดโดยประมาณ 10 ซม. (ยาว) x 10 ซม. (กว้าง) x 2 ซม. (สูง)
- น้ำหนัก: น้ำหนักประมาณ 30 กรัม
- ส่วนประกอบที่รวมอยู่: 1x Foam Filter, 1x Mesh Filter
- ซักได้: ใช่
9. การรับประกันและการสนับสนุน
For specific warranty information regarding your Akitas C10/C10 Turbo Pre-Filter Set, please refer to the documentation provided with your original vacuum cleaner or contact Akitas customer support directly. If you encounter any issues or have questions not covered in this manual, please visit the official Akitas webเข้าชมเว็บไซต์หรือติดต่อฝ่ายบริการลูกค้าเพื่อขอความช่วยเหลือ
You can often find support contact information on the Akitas Brand Store on Amazon.
