VEVOR 6 L Electric Automatic Pulsation Vacuum Milker Instruction Manual

1. ข้อมูลด้านความปลอดภัย

Please read and understand all safety instructions before operating the VEVOR Electric Automatic Pulsation Vacuum Milker. Failure to follow these instructions may result in injury to the operator or animal, or damage to the equipment.

1.1 ความปลอดภัยทั่วไป

• Always keep the milking machine and its components clean and dry to prevent electrical hazards and maintain hygiene.
• Ensure all connections are secure before operation to prevent vacuum leaks or accidental disconnections.
• Do not operate the machine with damaged cords or hoses. Inspect regularly for wear and tear.
• Keep children and unauthorized personnel away from the milking machine during operation.

1.2 Animal Welfare

• Always ensure the milking cups are properly attached to the animal's teats to prevent discomfort or injury.
• Monitor the animal's reaction during milking. If the animal shows signs of distress, stop the machine immediately and check for proper setup.
• The pulsation system is designed to mimic a calf's sucking action; however, observe the animal for any adverse reactions.

1.3 ความปลอดภัยทางไฟฟ้า

• Use only the provided power adapter for charging the rechargeable battery.
• ตรวจสอบให้แน่ใจว่าเต้ารับไฟฟ้าตรงกับปริมาตรtage specifications of the adapter.
• Do not immerse the vacuum pump unit in water or expose it to excessive moisture.
• Unplug the machine from the power source before cleaning or performing any maintenance.

2. สินค้าหมดview และคุณสมบัติ

The VEVOR 6 L Electric Automatic Pulsation Vacuum Milker is designed to provide an efficient and comfortable milking experience for goats and cows. Its portable design and user-friendly features make it suitable for small-scale farming and home breeding.

2.1 คุณสมบัติหลัก

• Efficient Milking: Operates at 60-80 pulsations per minute, saving labor and time.
• Gentle Pulsation System: Mimics natural sucking, with adjustable vacuum pressure from 45 to 50 kPa, ensuring comfort for animals and promoting milk production.
• วัสดุเกรดอาหาร: Features a 1.6 Gal / 6 L 304 stainless steel bucket and 4.1 ft food-grade silicone hoses and cups, preserving milk quality.
• แบบพกพาและชาร์จใหม่ได้: Powered by a rechargeable battery, allowing use anywhere without a direct power source. Includes a power adapter for convenient charging.
• ฟังก์ชั่นหยุดอัตโนมัติ: Equipped with an automatic stop device to prevent milk overflow into the machine, protecting the motor.
• ง่ายต่อการทำความสะอาด: Simple installation and disassembly, with bonus cleaning brushes included for thorough hygiene.

Figure 1: VEVOR 6 L Electric Automatic Pulsation Vacuum Milker with stainless steel bucket and overflow protection.

Figure 2: Illustration highlighting the labor and time-saving benefits of the battery-powered milking machine compared to manual milking.

3 ส่วนประกอบ

The VEVOR milking machine includes the following main components:

• Vacuum Pump Unit: The main control unit with a rechargeable battery, power switch, and ports for hoses. Features adjustable suction.
• Milking Bucket: A 1.6 Gal / 6 L capacity bucket made of 304 stainless steel.
• Bucket Lid: Stainless steel lid with integrated float valve for auto-stop and ports for hose connections.
• Milking Cups: Food-grade silicone cups designed for gentle milking, available in sizes suitable for goats and cows.
• ท่อยาง: Food-grade silicone hoses for milk transfer and vacuum lines.
• อะแดปเตอร์ไฟฟ้า: For charging the vacuum pump unit.
• แปรงทำความสะอาด: Various brushes for cleaning hoses and cups.

Figure 3: All components included with the VEVOR milking machine.

4. คำแนะนำในการตั้งค่า

Follow these steps to assemble your milking machine:

1. แกะส่วนประกอบ: นำชิ้นส่วนทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง
2. ชาร์จแบตเตอรี่: Before first use, fully charge the vacuum pump unit using the provided power adapter.
3. Install Float Valve: Ensure the float valve is correctly installed underneath the bucket lid. This prevents milk from entering the pump when the bucket is full.
4. เชื่อมต่อท่อกับปั๊ม: Identify the numbered ports (1 and 2) on the vacuum pump unit. Connect the corresponding numbered hoses (1 and 2) from the milking cups to these ports.
5. Connect Hoses to Bucket Lid: Identify the numbered ports (2 and 3) on the bucket lid. Connect the corresponding numbered hoses (2 and 3) from the vacuum pump unit to these ports.
6. Attach Milking Cups: Connect the silicone milking cups to the appropriate hoses. The machine comes with different sized cups for goats and cows.
7. ฝาปิดที่ปลอดภัย: Place the lid firmly on the stainless steel bucket and secure it using the four-side buckle type latches to ensure a good seal.

5. คู่มือการใช้งาน

Proper operation ensures efficient milking and animal comfort.

5.1 Animal Preparation

• Gently clean the animal's udders and teats with warm water and a mild disinfectant. Dry thoroughly.
• Ensure the animal is calm and comfortable before starting the milking process.

5.2 Starting Milking

1. เปิดปั๊ม: Locate the power switch on the vacuum pump unit and turn it ON. The power light will illuminate.
2. ปรับการดูด: Use the adjustable knob on the pump to set the desired vacuum pressure, typically between 45-50 kPa. The pulsation rate is 60-80 times per minute.
3. Attach Milking Cups: Gently place the silicone milking cups onto the animal's teats. Ensure a snug fit to create a proper vacuum seal.
4. Use Stopcock (if needed): If milking only one or two teats, use the stopcock clips on the milk tubes to block suction to unused cups, maintaining optimal pressure for the active cups.
5. Monitor Milk Flow: Observe the milk flowing through the transparent hoses into the bucket.
6. คุณสมบัติหยุดอัตโนมัติ: The integrated float valve in the lid will automatically stop the milking process when the bucket is full, preventing overflow.

5.3 Finishing Milking

1. ปิดปั๊ม: Once milking is complete or the auto-stop activates, turn off the vacuum pump unit.
2. Remove Milking Cups: Gently break the vacuum seal and remove the milking cups from the teats.
3. Post-Milking Care: Apply a suitable teat dip to the animal's teats to help prevent infection.

Figure 4: The vacuum pulsation system ensures gentle and effective milking.

Figure 5: Food-grade silicone teat cups provide comfort and hygiene for both goats and cows.

6. การบำรุงรักษาและการทำความสะอาด

Regular cleaning and maintenance are crucial for the longevity of your milking machine and for maintaining milk hygiene.

1. ถอดแยกชิ้นส่วน: After each milking session, disassemble all parts that come into contact with milk (milking cups, hoses, bucket lid).
2. การล้างเบื้องต้น: Rinse all components with cold water to remove any residual milk.
3. ซักด้วยผงซักฟอก: Prepare a solution of warm water and food-grade detergent. Use the provided cleaning brushes to thoroughly scrub the inside of the hoses and milking cups. Ensure all milk residue is removed.
4. Clean Bucket: Wash the stainless steel bucket with warm soapy water and rinse thoroughly.
5. การล้างครั้งสุดท้าย: Rinse all components again with clean, warm water to remove any detergent residue.
6. ฆ่าเชื้อ (ไม่จำเป็น): For enhanced hygiene, you may use a food-grade sanitizer according to its instructions.
7. การทำให้แห้งด้วยอากาศ: Allow all components to air dry completely before reassembling or storing to prevent bacterial growth.

Figure 6: Cleaning the milk hoses with the provided brush.

7 การแก้ไขปัญหา

If you encounter issues with your milking machine, refer to the following troubleshooting guide:

• ไม่มีแรงดูดหรือมีแรงดูดอ่อน:
  • Check all hose connections for tightness. Ensure there are no leaks.
  • Verify the bucket lid is securely fastened and the rubber seal is intact.
  • Ensure the milking cups are properly attached to the teats, creating a good seal.
  • Check if the stopcock clips are fully open on the active milking lines.
  • Inspect hoses for any kinks or blockages.
  • Check the battery level of the vacuum pump unit. Recharge if necessary.
• เครื่องไม่เปิด:
  • ตรวจสอบให้แน่ใจว่าสวิตช์ไฟอยู่ในตำแหน่ง "เปิด"
  • Check if the battery is charged. Connect the power adapter and try again.
  • Verify the power adapter is correctly plugged into both the unit and a working power outlet.
• Milk Overflowing into Pump:
  • Ensure the float valve inside the bucket lid is correctly installed and moves freely.
  • The float valve should rise and block the vacuum when the milk level is too high. If it's stuck, clean it.
• Animal Discomfort:
  • Check the vacuum pressure setting. Adjust to the recommended 45-50 kPa.
  • Ensure the milking cups are the correct size for the animal's teats.
  • Verify that the pulsation is consistent (60-80 times/min).

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

For technical support, warranty information, or any questions regarding your VEVOR product, please visit the official VEVOR webหรือติดต่อฝ่ายบริการลูกค้า เก็บใบเสร็จรับเงินไว้เพื่อใช้ในการเคลมประกัน