VEVOR 75FT x 3/8-Inch Auto-Feed Drain Cleaner Machine

1. บทนำ

This manual provides essential information for the safe and effective operation, setup, and maintenance of your VEVOR 75FT x 3/8-Inch Auto-Feed Drain Cleaner Machine. Please read and understand all instructions before use to ensure proper function and user safety.

2. ข้อมูลด้านความปลอดภัย

Operating power tools requires adherence to strict safety guidelines to prevent injury or damage. Always prioritize safety during all stages of use.

• Always wear appropriate personal protective equipment (PPE), including heavy-duty gloves and eye protection.
• Ensure the machine is connected to a Ground Fault Circuit Interrupter (GFCI) protected outlet to prevent electric shock.
• รักษาพื้นที่ทำงานให้สะอาดและมีแสงสว่างเพียงพอ พื้นที่ที่รกหรือมืดอาจเกิดอุบัติเหตุได้
• Do not operate the machine in the presence of flammable liquids or gases.
• เก็บเด็กและผู้คนที่ยืนดูอยู่ให้ห่างจากพื้นที่ปฏิบัติการ
• Never force the cable. If resistance is met, retract slightly and try again.
• Ensure the correct cutter is selected for the pipe size and type of clog.
• Always turn off and unplug the machine before performing any maintenance or changing accessories.

3. สินค้าหมดview และส่วนประกอบ

The VEVOR Drain Cleaner Machine is designed for efficient removal of stubborn clogs in pipes ranging from 1 inch to 4 inches in diameter. Key features include an auto-feed system, a powerful motor, and a variety of interchangeable cutters.

Image: VEVOR Drain Cleaner Machine with its main components and included cutters.

องค์ประกอบหลัก:

• หน่วยมอเตอร์: Provides power for cable rotation and auto-feed.
• ม้วนสายเคเบิล: Houses the 75FT x 3/8-inch steel core cable.
• Auto-Feed Control System: Manages cable feeding and retraction.
• Air-Activated Foot Switch: Allows hands-free operation of the motor.
• ด้ามจับพับเก็บได้: For easy transport and storage.
• 8-inch Shock-Absorbing Wheels: Facilitate mobility on various surfaces.
• ใบมีดแบบเปลี่ยนได้: Arrow, Spade, C-Cutter, Boring Bulb.
• Integrated GFCI: For electrical safety.

4. การตั้งค่า

The VEVOR Drain Cleaner Machine comes mostly pre-assembled. Follow these steps for final assembly before first use:

1. ติดที่จับ: Secure the retractable handle to the main frame using the provided hardware. Ensure all bolts are tightened securely.
2. ติดตั้งล้อ: Mount the 8-inch wheels to the axle, securing them with the provided washers and nuts.
3. Connect the Foot Switch: Plug the air-activated foot switch into its designated port on the machine.
4. ตรวจสอบสายเคเบิล: Before each use, visually inspect the entire length of the cable for any kinks, breaks, or damage. Replace damaged cables immediately.
5. Select and Attach Cutter: Choose the appropriate cutter for the job (refer to Section 6) and securely attach it to the end of the cable using the provided pin or locking mechanism.

5. คู่มือการใช้งาน

โปรดปฏิบัติตามขั้นตอนเหล่านี้เพื่อการใช้งานเครื่องทำความสะอาดท่อระบายน้ำอย่างปลอดภัยและมีประสิทธิภาพ:

1. วางตำแหน่งเครื่อง: Place the machine as close as possible to the drain opening. Ensure it is on a stable, level surface.
2. Insert the Cable: Manually feed the cable into the drain opening until it reaches the clog or a point of resistance.
3. Engage Auto-Feed: Set the auto-feed control system to the 'Forward' position.
4. เปิดใช้งานมอเตอร์: Press the air-activated foot switch to start the motor. The cable will begin to rotate and feed into the pipe.
5. Clear the Clog: Allow the cable to slowly advance, letting the rotating cutter work through the obstruction. Do not force the cable. If the cable binds, release the foot switch, set the auto-feed to 'Reverse' for a few seconds to relieve pressure, then switch back to 'Forward' and try again.
6. ดึงสายเคเบิลกลับ: Once the clog is cleared and water flows freely, release the foot switch. Set the auto-feed control system to the 'Reverse' position and press the foot switch to retract the cable. Guide the cable back into the drum carefully.
7. ทำความสะอาด: Turn off the machine, unplug it, and clean the cable and cutters thoroughly after each use.

Image: Proper operation of the VEVOR Drain Cleaner Machine, showing the user guiding the cable into a drain.

6. Cutter Selection

The machine includes four interchangeable cutters, each designed for specific types of clogs and pipe conditions:

ภาพ: รายละเอียด view of the four interchangeable cutters: Arrow, C-Cutter, Boring Bulb, and Spade.

7. การสมัคร

This drain cleaner machine is versatile and suitable for various applications in residential and commercial settings:

ภาพ: อดีตamples of where the drain cleaner can be used, including sewers, drain pipes, bathrooms, and floor drains.

• อ่างล้างจาน: Clearing grease and food particle blockages.
• Bathroom Drains: Removing hair and soap scum buildup.
• ท่อระบายน้ำชั้น: Addressing blockages in basements, garages, and utility rooms.
• Main Sewer Lines: Tackling larger obstructions in primary drainage systems.
• ห้องน้ำ: Clearing stubborn toilet clogs.

8. การบำรุงรักษา

Regular maintenance ensures the longevity and optimal performance of your drain cleaner machine.

• Cable Cleaning: After each use, clean the cable thoroughly to remove any debris, grease, or foreign matter. Use a stiff brush and appropriate cleaning solution.
• การตรวจสอบสายเคเบิล: Periodically inspect the cable for signs of wear, kinks, or corrosion. Replace the cable if any damage is observed.
• Cutter Maintenance: Clean cutters after each use. Sharpen or replace cutters as they become dull or damaged.
• การหล่อลื่น: Apply a light coat of lubricant to moving parts of the auto-feed mechanism and cable drum as needed.
• พื้นที่จัดเก็บ: Store the machine in a dry, clean area away from moisture and extreme temperatures. Ensure the cable is fully retracted into the drum.
• ตรวจสอบไฟฟ้า: Regularly inspect the power cord, foot switch, and GFCI for any damage.

9 การแก้ไขปัญหา

If you encounter issues with your VEVOR Drain Cleaner Machine, refer to the following common problems and solutions:

• เครื่องไม่เริ่มทำงาน:
  • Check if the power cord is securely plugged into a working GFCI outlet.
  • Ensure the foot switch is properly connected and functioning.
  • Verify the main power switch on the machine is in the 'ON' position.
  • Check the GFCI reset button; press to reset if tripped.
• Cable Does Not Feed or Retract:
  • Ensure the auto-feed lever is correctly set to 'Forward' or 'Reverse'.
  • Check for obstructions in the auto-feed mechanism.
  • The cable might be severely kinked or jammed in the pipe. Try reversing the motor briefly to relieve tension.
• Cable Twists or Kinks:
  • This often occurs when forcing the cable against a stubborn clog. Always allow the cutter to work slowly.
  • Ensure the cable is not extended too far out of the drum without support.
  • If a kink occurs, retract the cable and inspect for damage. Do not use a severely kinked cable.

10. ข้อมูลจำเพาะ

11. การรับประกันและการสนับสนุน

For warranty information, technical support, or service inquiries, please contact VEVOR customer support. Refer to the product packaging or the official VEVOR webโปรดเยี่ยมชมเว็บไซต์เพื่อดูรายละเอียดการติดต่อและเงื่อนไขการรับประกันล่าสุด

ผู้ผลิต: เวเวอร์

Webเว็บไซต์: www.vevor.com