เลห์มันน์ แอลแอลเอ็ม-2646

คู่มือการใช้งานเครื่องตัดหญ้าเบนซิน Lehmann LGALM-2646

รุ่น: LGALM-2646

1. บทนำ

Thank you for choosing the Lehmann LGALM-2646 Gasoline Lawn Mower. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before operating the machine and keep it for future reference.

1.1 คำแนะนำเพื่อความปลอดภัย

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or death.

2. สินค้าหมดview

Familiarize yourself with the components of your Lehmann LGALM-2646 lawn mower.

Lehmann LGALM-2646 Gasoline Lawn Mower with grass bag, extra blades, and oil bottle

รูปที่ 2.1: โดยรวม view of the Lehmann LGALM-2646 Gasoline Lawn Mower, including the grass collection bag, two spare blades, and a bottle of engine oil.

Close-up of the Lehmann LGALM-2646 lawn mower handlebar with labeled controls

รูปที่ 2.2: รายละเอียด view of the handlebar controls. (1) Engine Stop Lever, (2) Drive Lever.

2.1 ส่วนประกอบหลัก

3. การตั้งค่า

3.1 การประกอบ

The lawn mower requires minimal assembly. Follow these steps:

  1. นำส่วนประกอบทั้งหมดออกจากกล่อง
  2. Attach the handlebar to the main unit using the provided bolts and knobs. Ensure the handle is securely locked in the operating position.
  3. Assemble the grass collection bag if it came disassembled.
  4. Mount the grass collection bag onto the rear of the mower.

3.2 การตรวจสอบเบื้องต้น

Before first use, perform the following checks:

4. การดำเนินการ

4.1 การสตาร์ทเครื่องยนต์

Follow these steps to start your lawn mower:

Hand pulling the recoil starter cord on the Lehmann LGALM-2646 lawn mower

Figure 4.1: Starting the engine by pulling the recoil starter cord.

  1. Ensure the lawn mower is on a flat, level surface.
  2. กดปุ่มปั๊มน้ำมัน (ถ้ามี) 3-5 ครั้ง จนกว่าจะเห็นน้ำมันเชื้อเพลิงไหลออกมา
  3. Hold the engine stop lever (1 in Figure 2.2) firmly against the handlebar. The engine will not start unless this lever is held.
  4. Pull the recoil starter cord with a swift, continuous motion until the engine starts. Do not let the cord snap back.
  5. Once the engine starts, release the recoil starter cord slowly.
  6. To engage the rear-wheel drive, hold the drive lever (2 in Figure 2.2) against the handlebar. Release it to disengage.

4.2 การตัดหญ้า

For best results, mow when the grass is dry. Overlap cutting swaths slightly to ensure even coverage.

Lehmann LGALM-2646 lawn mower operating on green grass

Figure 4.2: The lawn mower in operation on a lawn.

4.3 การปรับความสูงในการตัด

The Lehmann LGALM-2646 features a 7-stage central cutting height adjustment, ranging from 25 mm to 70 mm.

  1. ดับเครื่องยนต์และรอจนกว่าใบมีดจะหยุดหมุนสนิท
  2. Locate the cutting height adjustment lever, typically near one of the rear wheels.
  3. Pull the lever outwards and move it to the desired height setting. The settings are usually numbered or indicated by notches.
  4. Ensure all wheels are set to the same height for an even cut.

5. การบำรุงรักษา

Regular maintenance ensures optimal performance and extends the life of your lawn mower. Always disconnect the spark plug cap before performing any maintenance.

5.1 การทำความสะอาด

Clean the mower after each use, especially the cutting deck, to prevent grass buildup and corrosion.

Underside of the Lehmann LGALM-2646 lawn mower deck, highlighting the area to clean

Figure 5.1: Area under the cutting deck that requires regular cleaning to prevent grass buildup and maintain performance.

Image showing 'No Corrosion Warranty' on the Lehmann LGALM-2646 lawn mower

Figure 5.2: The robust steel housing is designed to resist corrosion, contributing to the mower's longevity.

5.2 การดูแลใบมีด

A sharp blade ensures a clean cut and healthy lawn. Inspect the blade regularly for sharpness and damage.

5.3 พื้นที่จัดเก็บ

For long-term storage (over 30 days), prepare the mower as follows:

6 การแก้ไขปัญหา

หัวข้อนี้ให้แนวทางแก้ไขปัญหาทั่วไปที่คุณอาจพบเจอ

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องยนต์ไม่ติดNo fuel; Spark plug cap loose; Engine stop lever not held; Stale fuel; Clogged fuel filter; Faulty spark plug.Add fresh fuel; Connect spark plug cap securely; Hold engine stop lever; Drain and refill with fresh fuel; Clean/replace fuel filter; Replace spark plug.
เครื่องยนต์ทำงานไม่เรียบหรือดับDirty air filter; Stale fuel; Clogged carburetor; Incorrect oil level.Clean/replace air filter; Drain and refill with fresh fuel; Clean carburetor (professional service recommended); Adjust oil level.
ตัดไม่เท่ากันDull or bent blade; Wheels set to different heights; Uneven terrain.Sharpen or replace blade; Ensure all wheels are at the same cutting height; Mow on level ground where possible.
แรงสั่นสะเทือนมากเกินไปBent or unbalanced blade; Loose blade bolt; Debris caught in blade area.Inspect and replace blade if bent; Tighten blade bolt; Clear debris from under the deck.

7. ข้อมูลจำเพาะ

Technical data for the Lehmann LGALM-2646 Gasoline Lawn Mower.

คุณสมบัติรายละเอียด
หมายเลขรุ่นLGALM-2646
ความจุกระบอกสูบเครื่องยนต์146 ซม³
กำลังเครื่องยนต์3.5 แรงม้า
ประเภทไดรฟ์Rear-Wheel Drive (Gasoline-powered)
ความกว้างในการตัด46 ซม.
การปรับความสูงในการตัด7 วินาทีtage central adjustment
ช่วงความสูงของการตัด25 - 70 มม.
วัสดุที่ใช้ทำตัวเรือนRobust Steel
แฮนด์จับฟังก์ชั่นพับ
น้ำหนักสินค้า29 กก.
ขนาดสินค้า (ลึก x กว้าง x สูง)150 x 52 x 112 ซม.
สีสีดำ / สีแดง

8. การรับประกันและการสนับสนุน

For warranty information or technical support, please contact Lehmann customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Lehmann webเว็บไซต์หรือติดต่อตัวแทนจำหน่ายในพื้นที่ของคุณ

ผู้ผลิต: Lehmann
ยี่ห้อ: เลห์มันน์

เอกสารที่เกี่ยวข้อง - LGALM-2646

พรีview โต๊ะหมุน CNC LEHMANN - ฉบับหลัก 4 | ซีรีส์ PGD, E, DD
LEHMANN's Main Catalog Edition 4 สำหรับโต๊ะหมุน CNC สำรวจ PGD, E-Series, DD Series และอื่นๆ โซลูชันความเร็วสูง ปราศจากการสั่นไหว สำหรับระบบอัตโนมัติทางอุตสาหกรรมและการผลิตที่แม่นยำ
พรีview โปรแกรมอัปเดตเฟิร์มแวร์ของ Lehmann: คู่มือการใช้งานสำหรับล็อคและเครื่องอ่าน RFID
เอกสารนี้ให้คำแนะนำการใช้งานซอฟต์แวร์ LEHMANN Firmware Updater โดยอธิบายรายละเอียดวิธีการอัปเดตเฟิร์มแวร์บนล็อค เครื่องอ่าน RFID และเทอร์มินัลของ Lehmann รวมถึงข้อกำหนดของระบบ ผลิตภัณฑ์ที่ใช้งานร่วมกันได้ และคำแนะนำทีละขั้นตอน
พรีview คู่มือผู้ใช้ซอฟต์แวร์การจัดการ LEHMANN: การกำหนดค่าและการใช้งาน
คู่มือผู้ใช้ LEHMANN Management Software (LMS) ฉบับสมบูรณ์ ครอบคลุมรายละเอียดการกำหนดค่า การใช้งาน และการจัดการระบบ RFID ของ LEHMANN ทั้งแบบออฟไลน์และออนไลน์ ครอบคลุมการจัดการทรานสพอนเดอร์และล็อก การตั้งค่าผู้ใช้ และการดูแลระบบ
พรีview คู่มือการใช้งานล็อคตู้ล็อกเกอร์อิเล็กทรอนิกส์ LEHMANN M610 LEGIC L043-A03
คู่มือการใช้งานฉบับสมบูรณ์สำหรับล็อคตู้ล็อกเกอร์อิเล็กทรอนิกส์ LEHMANN M610 LEGIC L043-A03 ครอบคลุมการติดตั้ง การตั้งโปรแกรม การใช้งาน การบำรุงรักษา และการแก้ไขปัญหา
พรีview โปรแกรม LEHMANN RFID Karten: ข้อมูลและความปลอดภัย
Erfahren Sie จาก Sie LEHMANN RFID-Schließsysteme ในด้านการติดตั้งและโปรแกรมผู้ใช้ Diese Anleitung erklärt ตาย Betriebsmodi, Funktionen und den Reset-Prozess.
พรีview คู่มือการใช้งานและคำแนะนำการใช้งานสำหรับล็อคแบบหมุนหมายเลข LEHMANN VERTO รุ่นลิขสิทธิ์ส่วนตัว (รหัสคงที่)
คู่มือการใช้งานและคำแนะนำการใช้งานอย่างละเอียดสำหรับล็อคประตูแบบหมุนรหัส LEHMANN VERTO รุ่นส่วนตัว (รหัสคงที่) เรียนรู้วิธีการตั้งค่า เปลี่ยน และรีเซ็ตรหัสผู้ใช้ รวมถึงวิธีการเปิดประตูในกรณีฉุกเฉิน