ซีทีเค 56-353

CTEK Battery Charger Bundle User Manual

Models: Multi US 7002 (56-353), MXS 5.0 (40-206)

1. สินค้าหมดview

This bundle provides a complete solution for 12-volt battery care, featuring two advanced CTEK battery chargers: the Multi US 7002 and the MXS 5.0. Both chargers offer fully automatic charging cycles, including patented desulphation and reconditioning functionalities to extend battery life and ensure optimal performance. The bundle also includes two high-quality silicone bumpers designed to protect your chargers and vehicle surfaces during use.

The Multi US 7002 is a versatile charger suitable for a wide range of 12V lead-acid batteries (14-225Ah), including WET, MF, Ca/Ca, AGM, and GEL. It features a unique SUPPLY mode for power supply during battery changes and a RECOND mode for restoring stratified batteries.

The MXS 5.0 is ideal for smaller 12V batteries (1.2-160Ah) and is particularly suited for start-stop systems. It also includes a reconditioning mode and built-in temperature sensing for optimized charging.

2. เนื้อหาบรรจุภัณฑ์

โปรดตรวจสอบว่ารายการทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณหรือไม่:

  • 1 x CTEK Multi US 7002 12-Volt Battery Charger (Part No. 56-353)
  • 1 x CTEK MXS 5.0 Fully Automatic 4.3 amp Battery Charger (Part No. 40-206)
  • 1 x CTEK Bumper 100 (Part No. 40-058) for Multi US 7002
  • 1 x CTEK Bumper 60 (Part No. 56-915) for MXS 5.0
CTEK Bundle contents including Multi US 7002, MXS 5.0 chargers, and two black protective bumpers.

Image: The complete CTEK Bundle showing both chargers and their respective protective bumpers.

3. การตั้งค่าเริ่มต้น

3.1 Attaching the Protective Bumpers

The included silicone bumpers are designed to protect your chargers from impacts and provide extra grip. Simply slide the appropriate bumper onto each charger until it fits snugly.

CTEK MXS 5.0 charger with a black protective bumper attached.

Image: The MXS 5.0 charger with its black silicone bumper installed.

3.2 Connecting the Charger to the Battery

Follow these steps to safely connect your CTEK charger to a 12-volt battery:

  1. Ensure the charger is disconnected from the wall socket.
  2. เชื่อมต่อสีแดงบวก (+) clamp กับขั้วแบตเตอรี่บวก (+)
  3. เชื่อมต่อขั้วลบสีดำ (-) clamp to the negative (-) battery terminal. For vehicles, if connecting to the chassis, ensure it is away from the fuel line and battery.
  4. Once connected to the battery, plug the charger into a suitable wall socket.
A person connecting the CTEK Multi US 7002 charger to a car battery under the hood.

Image: A user connecting the CTEK Multi US 7002 to a vehicle battery.

Diagram showing three steps: 1. Connect charger to battery, 2. Connect charger to wall socket, 3. Press Mode button to select charging program.

Image: Visual guide for safe and easy connection and operation.

4. คู่มือการใช้งาน

4.1 MXS 5.0 Charging Process

The MXS 5.0 features an 8-step fully automatic charging cycle designed to recondition, restore, and maintain your battery. Once connected and powered, the charger will automatically begin its sequence.

CTEK MXS 5.0 charger connected to a battery, illustrating the 8-step charging cycle.

Image: The MXS 5.0 charger demonstrating its recondition, restore, and maintain capabilities.

Press the 'MODE' button to cycle through available charging programs, such as 'NORMAL' for standard charging, 'RECOND' for deeply discharged batteries, and 'AGM' for AGM batteries. The indicator lights will show the current charging stage.

4.2 Multi US 7002 Charging Process

The Multi US 7002 is a highly versatile charger with multiple modes for comprehensive battery care:

  • โหมดปกติ: การชาร์จมาตรฐานสำหรับแบตเตอรี่ตะกั่วกรด 12V ส่วนใหญ่
  • SUPPLY Mode: Acts as a power supply unit, preventing loss of settings when changing a battery in a vehicle.
  • RECOND Mode: Restores the power capacity of stratified batteries, prolonging their life.
CTEK Multi US 7002 charger with its mode selection button and indicator lights.

Image: Close-up of the Multi US 7002 charger's interface.

Press the 'MODE' button to select the desired program. The charger will then automatically proceed through its charging steps, indicated by the illuminated LEDs.

5. การดูแลรักษา

To ensure the longevity and optimal performance of your CTEK chargers:

  • Keep the chargers clean and dry. Wipe with a soft, damp ใช้ผ้าเช็ดทำความสะอาดหากจำเป็น ห้ามใช้สารเคมีรุนแรงหรือน้ำยาทำความสะอาดที่มีฤทธิ์กัดกร่อน
  • Store the chargers in a cool, dry place when not in use.
  • Regularly inspect the cables and connectors for any signs of damage. Do not use if cables are frayed or damaged.
  • The chargers are IP65 rated (splash and dustproof), but avoid submerging them in water.

6 การแก้ไขปัญหา

If you encounter issues with your CTEK charger, refer to the table below for common problems and solutions:

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องชาร์จไม่ทำงานการเชื่อมต่อไม่ถูกต้อง; ระดับเสียงแบตเตอรี่tage too low; No power from wall socket.Check battery connections (positive to positive, negative to negative). Ensure battery voltage is above 2V (for MXS 5.0) or 1.5V (for Multi US 7002). Verify wall socket has power.
Error light illuminatedReverse polarity; Short circuit; Battery fault.ถอดปลั๊กแล้วเสียบปลั๊กใหม่amps ensuring correct polarity. Check for any short circuits in the cables or battery. If error persists, the battery may be faulty.
Charger not reaching full chargeBattery heavily sulphated; Incorrect mode selected.For sulphated batteries, try the RECOND mode (if available on your model). Ensure the correct charging mode is selected for your battery type.
ที่ชาร์จร้อนขึ้นการทำงานปกติในระหว่างการชาร์จThis is normal. Ensure adequate ventilation around the charger. If it becomes excessively hot or emits smoke, disconnect immediately.

If the problem persists after attempting these solutions, please contact CTEK customer support.

7. ข้อมูลจำเพาะทางเทคนิค

Key specifications for the CTEK Multi US 7002 and MXS 5.0 chargers:

คุณสมบัติข้อมูลจำเพาะ
ยี่ห้อซีทีเค
ปริมาณการส่งออกtage12 โวลต์
อินพุต Voltage12 Volts (for charger operation)
หมายเลขรุ่นMulti US 7002 (56-353), MXS 5.0 (40-206)
สีBlack (chargers are typically grey/silver with black accents)
การรับรองความปลอดภัยCE,FCC,UL.รับรอง
ระดับการป้องกันIP65 (ป้องกันน้ำกระเซ็นและฝุ่น)

8. การรับประกันและการสนับสนุนลูกค้า

CTEK products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official CTEK webเว็บไซต์.

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact CTEK customer support through their official channels. Contact information can typically be found on the CTEK webเว็บไซต์หรือในบรรจุภัณฑ์ของผลิตภัณฑ์

เอกสารที่เกี่ยวข้อง - 56-353

พรีview คู่มือการแก้ไขปัญหา CTEK MULTI US 7002 | ปัญหาเครื่องชาร์จแบตเตอรี่
คู่มือการแก้ไขปัญหาที่ครอบคลุมสำหรับเครื่องชาร์จแบตเตอรี่ CTEK MULTI US 7002 ซึ่งมีรายละเอียดเกี่ยวกับปัญหาไฟ LED ทั่วไป คำอธิบาย และการทดสอบที่แนะนำเพื่อแก้ไขปัญหา
พรีview คู่มือผู้ใช้เครื่องชาร์จแบตเตอรี่ CTEK MXS 5.0
คู่มือการใช้งานฉบับสมบูรณ์สำหรับเครื่องชาร์จแบตเตอรี่ CTEK MXS 5.0 (1090) 12V ครอบคลุมคำแนะนำด้านความปลอดภัย ขั้นตอนการใช้งาน โปรแกรมการชาร์จ ข้อมูลจำเพาะทางเทคนิค และข้อมูลการรับประกัน
พรีview คู่มือผู้ใช้เครื่องชาร์จแบตเตอรี่ CTEK Comfort Connect
คู่มือผู้ใช้ที่ครอบคลุมสำหรับเครื่องชาร์จแบตเตอรี่ CTEK Comfort Connect ซึ่งมีรายละเอียดเกี่ยวกับโหมดการชาร์จ คำแนะนำในการเชื่อมต่อ ข้อควรระวังด้านความปลอดภัย และข้อมูลจำเพาะทางเทคนิค
พรีview คำสั่ง Obsługi CTEK MXS 5.0 การทดสอบและการชาร์จ
Szczegółowa instrukcja obsługi dla ładowarki CTEK MXS 5.0 Test & Charge, obejmujęca tryby ładowania, testowe ขั้นตอน, wskazówki bezpieczeństwa, specyfikacje techniczne oraz informacje o gwarancji
พรีview คู่มือผู้ใช้เครื่องชาร์จแบตเตอรี่ CTEK MXS 7.0
คู่มือผู้ใช้ที่ครอบคลุมสำหรับเครื่องชาร์จแบตเตอรี่ CTEK MXS 7.0 ซึ่งมีรายละเอียดเกี่ยวกับคุณลักษณะ โปรแกรมการชาร์จ ข้อมูลจำเพาะทางเทคนิค และแนวทางด้านความปลอดภัยสำหรับแบตเตอรี่ตะกั่วกรด 12V ทุกประเภท
พรีview คู่มือการใช้งานเครื่องชาร์จแบตเตอรี่ CTEK MXS 5.0 - คุณสมบัติ ข้อมูลจำเพาะ และความปลอดภัย
คู่มือการใช้งานฉบับสมบูรณ์สำหรับเครื่องชาร์จแบตเตอรี่แบบสวิตช์โหมดระดับมืออาชีพ CTEK MXS 5.0 ประกอบด้วยโปรแกรมการชาร์จ ข้อมูลจำเพาะทางเทคนิค คำแนะนำในการเชื่อมต่อ แนวทางด้านความปลอดภัย และข้อมูลการรับประกัน