Cerakote Professional Ceramic Coating for Cars

1. บทนำ

1.1 ผลิตภัณฑ์เกินview

The Cerakote Professional Ceramic Coating for Cars is a high-gloss, professional-grade paint protection kit designed to provide ultra-hydrophobic, UV, and chemical-resistant properties. This easy-to-apply kit ensures long-lasting protection for up to 500 real-world car washes, keeping your vehicle looking new with minimal effort. It safeguards against scratches, chemical stains, and fading, creating a super-hydrophobic surface that repels water and contaminants.

Figure 1: Cerakote Professional Ceramic Coating Kit

1.2 สิ่งที่รวมอยู่

• (2) 30 mL Bottles of Professional Ceramic Paint Coating
• (1) High Quality Microfiber Applicator
• (1) Set of In-Depth Instructions

Figure 2: Kit contents within the packaging

2. การตั้งค่า

2.1 การเตรียมตัว

Proper preparation is crucial for optimal results. Ensure the vehicle's paint is already corrected, which may include clay bar treatment and paint correction to remove imperfections. The application should be performed in a clean environment, out of direct sunlight, and on a cool-to-touch surface.

Before applying the coating, wipe the paint with isopropyl alcohol to remove any residue from the paint correction process. This ensures a clean surface for the ceramic coating to bond effectively.

3. คู่มือการใช้งาน

3.1 ขั้นตอนการสมัคร

1. เขย่าขวด: Shake the bottle of Cerakote Professional Ceramic Paint Coating for approximately 30 seconds to ensure the contents are well mixed.
2. เตรียมผู้สมัคร: Thoroughly wet your microfiber application pad with the coating. The pad should feel slick and glide easily across the surface. You will need to rewet the pad for each new section you work on.
3. Apply to Surface: Apply the coating to the vehicle's paint using a cross-hatch application method. Work in manageable sections, typically 3-foot sections, to ensure even coverage.
4. ตรวจสอบ: After applying to a section, inspect it carefully to ensure there are no missed areas. Touch up as needed.
5. ตั้งเวลา: Start a timer for 5 minutes. During this time, you may notice the coating start to 'sweat' or 'bead' on the surface; this is normal.
6. บัฟ: After the 5 minutes are up, begin buffing the coated surface using new, high-quality microfiber cloths. A two-towel buffing method is recommended: use the first towel to level and remove any excess coating, and the second towel to buff to a deep shine.

Figure 3: Applying the coating to the applicator pad

Figure 4: Applying the coating to the vehicle's surface

Figure 5: Buffing the coated surface for a brilliant shine

3.2 Hydrophobic Properties

The applied coating creates an ultra-hydrophobic surface, causing water to bead and roll off, which significantly reduces the need for frequent washing and makes cleaning easier.

4. การบำรุงรักษา

4.1 Post-Application Curing

Allow the coating to cure for a minimum of 2 hours at 65°F (18°C) or higher before returning the vehicle to the customer or exposing it to moisture. For optimal durability and performance, allow the coating to cure for a full 24 hours at 65°F (18°C) or higher before washing the vehicle.

4.2 การดูแลทั่วไป

To maintain the longevity and performance of your Cerakote ceramic coating, regular washing with pH-neutral car wash soap is recommended. Avoid abrasive cleaners or harsh chemicals that could compromise the coating's integrity. The ultra-hydrophobic surface will make future cleaning significantly easier.

5 การแก้ไขปัญหา

5.1 ปัญหาทั่วไป

• Hazing or Streaks: If hazing or streaks appear after buffing, it may indicate that the coating was not fully leveled or removed. Re-buff the affected area with a clean, dry microfiber cloth. Ensure you are working in small, manageable sections and inspecting thoroughly.
• การใช้งานที่ไม่สม่ำเสมอ: If certain areas appear less glossy or hydrophobic, it may be due to uneven application. Ensure the applicator pad is thoroughly wet and apply using the cross-hatch method to achieve uniform coverage.

6. ข้อมูลจำเพาะ

7. การรับประกันและการสนับสนุน

For any questions, comments, or technical support regarding your Cerakote Professional Ceramic Coating, please contact us:

• บริการลูกค้า: 1-866-774-7628
• อีเมล: TECHNICALSUPPORT@CERAKOTE.COM

Cerakote is committed to providing high-performance products and excellent customer service. We are here to help you achieve the best possible results with your ceramic coating.