WORKPRO Mini Electric Precision Screwdriver

1. สินค้าหมดview

The WORKPRO Mini Electric Precision Screwdriver is designed for intricate tasks requiring precision and efficiency. Featuring a powerful motor, long-lasting battery, and a comprehensive set of S2 steel bits, this tool is ideal for repairing small electronics, performing DIY projects, and handling delicate components. Its magnetic design ensures bits and screws remain secure, while the compact and lightweight aluminum alloy body provides comfortable handling.

2. เนื้อหาผลิตภัณฑ์

• 1 x WORKPRO Mini Electric Precision Screwdriver
• 22 x S2 Steel Precision Bits (16x 28mm, 4x 45mm)
• สายชาร์จ Type-C 1 เส้น
• 1 x Portable Storage Case with Magnetization Area

Figure 1: The WORKPRO Mini Electric Screwdriver kit, showcasing the screwdriver, various S2 steel bits, and the portable storage case.

3. การตั้งค่า

3.1 การชาร์จอุปกรณ์

Before first use, fully charge the screwdriver. Connect the provided Type-C charging cable to the charging port on the screwdriver and to a compatible USB power source (e.g., power bank, USB charger, car charger, laptop/PC). The battery indicator lights will illuminate during charging and turn solid when fully charged. A full charge typically takes approximately 1 hour and provides enough power to tighten up to 600 screws.

Figure 2: The screwdriver being charged via its Type-C port, connected to a laptop. The image highlights various compatible charging methods.

3.2 Inserting Bits

Select the appropriate S2 steel bit for your task. Insert the bit firmly into the magnetic chuck at the tip of the screwdriver. The magnetic design will hold the bit securely in place.

3.3 Magnetic Features

The storage case includes a magnetization area. If a bit's magnetic property weakens, place the bit in this area to re-magnetize it, ensuring screws are easily attracted and held.

Figure 3: The magnetic design of the screwdriver bit holder and the dedicated magnetization area in the storage case for enhancing bit magnetism.

4. คู่มือการใช้งาน

4.1 การเปิด/ปิดเครื่องและการควบคุมทิศทาง

The screwdriver features two main buttons for operation: one for forward (tightening) and one for reverse (loosening). Press and hold the desired button to activate the screwdriver. Release the button to stop operation.

4.2 การปรับแรงบิด

The screwdriver offers multiple torque settings for precision work. To adjust the torque, locate the torque adjustment button (often indicated by a gear or power symbol). Press and hold this button until the indicator lights flash. Each subsequent short press will cycle through the available torque levels (e.g., 1 to 5 bars). 5 bars indicate high torque, while 1 bar indicates low torque. The electric torque ranges from 0.3 to 0.5 Newton-meters (Nm). For higher torque requirements, the screwdriver can be used manually, supporting up to 7 Nm.

4.3 Using LED Lights

The screwdriver is equipped with 3 LED lights at the tip to illuminate your work area. Press the dedicated light button (often a single press) to switch the LED lights on or off, providing clear visibility in dimly lit spaces.

Figure 4: The screwdriver's integrated LED lights provide illumination for precision tasks, as shown while working on a circuit board.

4.4 การตรวจสอบระดับแบตเตอรี่

To check the current battery level, double-click the torque adjustment button. The indicator lights will show the battery status (e.g., 5 bars for high battery, 1 bar for low battery).

4.5 การใช้งานทั่วไป

This precision screwdriver is suitable for a wide range of applications, including:

• Repairing smartphones, laptops, and digital cameras.
• Assembling or disassembling drones and watches.
• Adjusting glasses and keyboards.
• Various small home repairs and DIY projects.

Figure 5: Demonstrating the precision screwdriver in use for electronic device repair.

4.6 วิดีโอแนะนำวิธีการใช้งาน

5. การบำรุงรักษา

5.1 การดูแลแบตเตอรี่

To prolong battery life, it is recommended to charge the battery periodically, even if the screwdriver is not in regular use. Prolonged non-charging can cause the battery to enter protection mode and prevent it from charging.

5.2 การทำความสะอาด

Wipe the screwdriver and bits with a clean, dry cloth after each use to remove dust and debris. Avoid using harsh chemicals or abrasive materials that could damage the finish or components.

5.3 Bit Care

The S2 steel bits feature a grey phosphating surface for enhanced hardness and rust resistance. Store bits securely in the provided case to prevent loss and damage. Re-magnetize bits as needed using the case's magnetization area.

6 การแก้ไขปัญหา

6.1 อุปกรณ์ไม่เปิด

• ตรวจสอบแบตเตอรี่: Ensure the battery is charged. Connect the screwdriver to the Type-C charging cable and a power source.
• ปุ่มเปิด/ปิด: Confirm you are pressing and holding the correct forward/reverse button firmly.

6.2 Screwdriver Not Charging

• การเชื่อมต่อสายเคเบิล: Verify the Type-C cable is securely connected to both the screwdriver and the power source.
• แหล่งพลังงาน: Try a different USB power adapter or port to rule out a faulty power source.
• โหมดป้องกันแบตเตอรี่: If the device has been uncharged for a long time, the battery might be in protection mode. Try charging for an extended period (e.g., 2-3 hours) to reactivate it.

6.3 Insufficient Torque

• การตั้งค่าแรงบิด: Adjust the torque setting to a higher level using the torque adjustment button.
• การดำเนินการด้วยตนเอง: For very tight screws, use the screwdriver in manual mode, which supports up to 7 Nm of torque.
• สภาพดอกสว่าน: Ensure the bit is not worn or stripped, which can reduce effective torque transfer.

7. ข้อมูลจำเพาะ

8. การรับประกันและการสนับสนุน

Specific warranty details and direct support contact information were not provided in the product data. Please refer to the product packaging or the official WORKPRO webโปรดเยี่ยมชมเว็บไซต์เพื่อดูนโยบายการรับประกันและตัวเลือกการสนับสนุนลูกค้าล่าสุด