LEHMANN LGALM-2642

คู่มือการใช้งานเครื่องตัดหญ้าแบบขับเคลื่อนด้วยตัวเอง LEHMANN LGALM-2642 ที่ใช้ความร้อน

Model: LGALM-2642

1. ข้อมูลด้านความปลอดภัย

Read and understand all safety warnings and instructions before operating this lawn mower. Failure to follow these instructions may result in serious injury.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses, sturdy footwear, and hearing protection.
  • Keep hands and feet away from rotating parts. The blade continues to rotate for a short period after the engine is switched off.
  • ห้ามใช้งานเครื่องตัดหญ้าขณะหญ้าเปียกหรือขณะฝนตก
  • Clear the area of objects such as rocks, toys, and wires before mowing.
  • Never allow children or untrained individuals to operate the lawn mower.
  • เติมน้ำมันในบริเวณที่มีอากาศถ่ายเทสะดวก โดยดับเครื่องยนต์และรอให้เครื่องเย็นลงก่อน ห้ามสูบบุหรี่ขณะเติมน้ำมัน
  • Always disconnect the spark plug wire before performing any maintenance or cleaning.

2. การติดตั้งและการประกอบ

Follow these steps to prepare your lawn mower for first use.

2.1 การแกะกล่อง

นำชิ้นส่วนทั้งหมดออกจากบรรจุภัณฑ์อย่างระมัดระวัง ตรวจสอบให้แน่ใจว่ามีชิ้นส่วนครบถ้วนตามรายการที่ระบุไว้บนบรรจุภัณฑ์

2.2 การประกอบมือจับ

  1. Unfold the handle and secure it in the operating position using the provided knobs or levers.
  2. ตรวจสอบให้แน่ใจว่าสายเคเบิลทั้งหมดถูกจัดวางอย่างถูกต้องและไม่ถูกหนีบ

2.3 การเติมน้ำมันเครื่อง

The engine is shipped without oil. It is crucial to add the correct type and amount of oil before starting.

  • วางเครื่องตัดหญ้าบนพื้นผิวเรียบ
  • ค้นหาฝาครอบเติมน้ำมัน/ก้านวัดระดับน้ำมัน
  • Carefully pour the recommended engine oil (e.g., SAE 30 or 10W-30, approximately 0.5 liters) into the oil fill opening until it reaches the 'FULL' mark on the dipstick. Do not overfill.
Hand pouring oil into the lawn mower engine.
ภาพที่ 2.3.1: A hand carefully pouring engine oil into the oil fill opening of the lawn mower. This step is essential before the first use to ensure proper engine lubrication.

2.4 การเติมเชื้อเพลิง

Use fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

  • ตรวจสอบให้แน่ใจว่าเครื่องยนต์ดับและเย็นลง
  • เปิดฝาถังน้ำมัน.
  • Fill the fuel tank, leaving a small space for expansion.
  • ปิดฝาถังน้ำมันให้สนิท

2.5 Grass Collection Bag Attachment

Assemble the grass collection bag if necessary and attach it to the rear discharge opening of the mower.

LEHMANN LGALM-2642 Self-Propelled Thermal Lawn Mower with oil and spare blades.
ภาพที่ 2.5.1: โอเวอร์view of the LEHMANN LGALM-2642 lawn mower, including the grass collection bag, engine, and handle. Also shown are a bottle of engine oil and two cutting blades, one red and one black.

3. คู่มือการใช้งาน

ทำความคุ้นเคยกับการควบคุมและขั้นตอนการทำงานก่อนสตาร์ทเครื่องยนต์

3.1 การสตาร์ทเครื่องยนต์

  1. Ensure the fuel tank is filled and engine oil is at the correct level.
  2. Press the primer bulb (if equipped) 3-5 times until fuel is visible.
  3. เลื่อนคันเร่งไปที่ตำแหน่ง 'START' หรือ 'CHOKE'
  4. Firmly grasp the starter handle and pull the starter cord with a smooth, continuous motion until the engine starts.
  5. เมื่อเครื่องยนต์ติดแล้ว ให้ค่อยๆ เลื่อนคันเร่งไปที่ตำแหน่ง 'RUN'
Hand pulling the starter cord of the lawn mower.
ภาพที่ 3.1.1: A hand pulling the starter cord to initiate the engine of the lawn mower.

3.2 การปรับความสูงในการตัด

The cutting height can be adjusted to 5 levels, ranging from 25 mm to 70 mm.

  • ตรวจสอบให้แน่ใจว่าเครื่องยนต์ดับและใบพัดหยุดหมุน
  • Locate the height adjustment levers, typically near the wheels.
  • Move the levers to the desired cutting height setting. Ensure all wheels are set to the same height.
Close-up of the lawn mower's cutting height adjustment mechanism, showing settings from 2.5 cm to 7 cm.
ภาพที่ 3.2.1: รายละเอียด view of the lawn mower's cutting height adjustment, illustrating the five available settings from 2.5 cm (25 mm) to 7 cm (70 mm).
Hand adjusting the cutting height lever on the lawn mower.
ภาพที่ 3.2.2: A hand manipulating the red lever on the side of the lawn mower to adjust the cutting height.

3.3 การมีส่วนร่วมในการขับเคลื่อนตนเอง

This model features self-propulsion for easier operation.

  • With the engine running, engage the self-propel lever (usually located on the handle).
  • The mower will begin to move forward. Release the lever to disengage self-propulsion.
Person operating the LEHMANN LGALM-2642 self-propelled lawn mower on a green lawn.
ภาพที่ 3.3.1: A person demonstrating the use of the LEHMANN LGALM-2642 self-propelled lawn mower, pushing it across a well-maintained lawn.

3.4 การเทถุงเก็บหญ้าทิ้ง

Regularly check and empty the grass collection bag to maintain optimal cutting performance.

  • Stop the engine and wait for the blade to stop completely.
  • Lift the rear discharge flap and carefully remove the grass bag.
  • Empty the grass clippings into a suitable container.
  • Reattach the grass bag securely.
Hand removing the grass collection bag from the lawn mower.
ภาพที่ 3.4.1: A hand detaching the grass collection bag from the rear of the lawn mower, ready for emptying.

3.5 การดับเครื่องยนต์

To stop the engine, release the engine brake lever (usually located on the handle). The engine will shut off automatically.

4. การบำรุงรักษา

การบำรุงรักษาอย่างสม่ำเสมอจะช่วยให้เครื่องตัดหญ้าของคุณมีอายุการใช้งานยาวนานและทำงานได้อย่างมีประสิทธิภาพสูงสุด

4.1 การทำความสะอาด

  • After each use, clean the underside of the mower deck to prevent grass buildup.
  • This model features a water hose connection for easy deck cleaning. Attach a garden hose to the nozzle, start the engine, and engage the blade for a few minutes to clean the deck.
  • ทำความสะอาดภายนอกด้วยโฆษณาamp cloth. Do not use high-pressure washers directly on the engine or electrical components.
Close-up of the water hose connection point on the lawn mower deck and the blade being cleaned by water.
ภาพที่ 4.1.1: รายละเอียด view showing the water hose connection on the mower deck, designed for easy cleaning of the blade and underside with water.

4.2 การดูแลใบมีด

  • ควรตรวจสอบความคมของใบเลื่อยและร่องรอยความเสียหายเป็นประจำ ใบเลื่อยที่ทื่อจะทำให้หญ้าฉีกขาด ส่งผลให้สนามหญ้าไม่แข็งแรง
  • If the blade is dull, have it sharpened or replaced by a qualified service technician.
  • Always disconnect the spark plug wire before inspecting or working on the blade.
Close-up of the red cutting blade inside the mower deck.
ภาพที่ 4.2.1: ภาพระยะใกล้ view of the red cutting blade within the mower deck, highlighting its design for efficient grass cutting.

4.3 การเปลี่ยนถ่ายน้ำมันเครื่อง

ควรเปลี่ยนถ่ายน้ำมันเครื่องหลังจากใช้งานครบ 5 ชั่วโมงแรก จากนั้นเปลี่ยนทุกๆ 25 ชั่วโมง หรือปีละครั้ง แล้วแต่ว่าอย่างใดจะถึงก่อน

  • ให้เครื่องยนต์ทำงานสักสองสามนาทีเพื่ออุ่นน้ำมัน
  • ดับเครื่องยนต์และถอดสายหัวเทียน
  • Place a suitable container under the oil drain plug (or tilt the mower to drain from the fill tube).
  • Remove the drain plug (or fill cap) and allow the oil to drain completely.
  • Replace the drain plug and refill with the recommended amount and type of new engine oil.

4.4 Air Filter Inspection and Cleaning

Inspect the air filter regularly and clean or replace it as needed to ensure proper engine performance.

Close-up of the lawn mower engine, showing the air filter cover.
ภาพที่ 4.4.1: ภาพระยะใกล้ view of the lawn mower's engine, with a focus on the air filter housing, which requires regular inspection and cleaning.

4.5 การตรวจสอบหัวเทียน

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary.

Hand connecting the spark plug cap to the engine.
ภาพที่ 4.5.1: A hand carefully connecting the spark plug cap to the engine, a routine maintenance task.

4.6 พื้นที่จัดเก็บ

For long-term storage, ensure the fuel tank is empty or treated with a fuel stabilizer. Clean the mower thoroughly and store it in a dry, protected area. The foldable handle allows for space-saving storage.

5 การแก้ไขปัญหา

หัวข้อนี้จะกล่าวถึงปัญหาทั่วไปที่คุณอาจพบกับเครื่องตัดหญ้าของคุณ

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
เครื่องยนต์ไม่ติด
  • ไม่มีเชื้อเพลิงหรือเชื้อเพลิงหมดอายุ
  • Engine oil level too low
  • ถอดสายหัวเทียนออก
  • กรองอากาศอุดตัน
  • หัวเทียนเสีย
  • Fill with fresh fuel
  • ตรวจสอบและเติมน้ำมัน
  • เชื่อมต่อสายหัวเทียน
  • ล้าง/เปลี่ยนกรองอากาศ
  • ตรวจสอบ/เปลี่ยนหัวเทียน
เครื่องตัดหญ้าตัดไม่สม่ำเสมอ
  • ใบมีดทื่อหรือชำรุด
  • Uneven cutting height adjustment
  • Excessive grass buildup under deck
  • ลับคมหรือเปลี่ยนใบมีด
  • ตรวจสอบให้แน่ใจว่าล้อทุกล้อมีความสูงเท่ากัน
  • Clean mower deck
แรงสั่นสะเทือนมากเกินไป
  • ใบมีดงอหรือไม่สมดุล
  • Loose engine mounting bolts
  • Inspect and replace blade if bent; balance if dull
  • ขันน๊อตให้แน่น
Self-propulsion not engaging
  • สายพานขับหลวมหรือชำรุด
  • Control cable adjustment
  • Inspect and replace drive belt
  • Adjust or replace control cable

6. ข้อมูลจำเพาะ

Key technical details for the LEHMANN LGALM-2642 Lawn Mower.

Diagram showing the dimensions of the LEHMANN LGALM-2642 lawn mower.
ภาพที่ 6.1.1: A diagram illustrating the key dimensions of the LEHMANN LGALM-2642 lawn mower, including length (139 cm), width (48 cm), and height (103 cm).
คุณสมบัติรายละเอียด
หมายเลขรุ่นLGALM-2642
ชนิดเครื่องยนต์146 cm³ OHV Internal Combustion Engine
กำลังเครื่องยนต์3.49 แรงม้า (2.6 กิโลวัตต์)
ความกว้างในการตัด42 ซม.
การปรับความสูงในการตัด5 levels (25 mm - 70 mm)
ความจุถุงหญ้า40 ลิตร
พื้นที่สนามหญ้าที่แนะนำมากถึง 2000 m²
โหมดการทำงานSelf-Propelled (Automatic)
วัสดุเหล็กอัลลอยด์
น้ำหนักสินค้า29 กก.
ขนาดสินค้า (กว้าง x ยาว x สูง)Approx. 139 cm x 48 cm x 103 cm (assembled)

7. การรับประกันและการสนับสนุน

LEHMANN products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or contact LEHMANN customer service.

7.1 การสนับสนุนลูกค้า

If you have any questions, require technical assistance, or need to order replacement parts, please contact LEHMANN customer support through the retailer where you purchased the product or visit the official LEHMANN webเว็บไซต์สำหรับรายละเอียดการติดต่อ

When contacting support, please have your model number (LGALM-2642) and purchase date available.

เอกสารที่เกี่ยวข้อง - LGALM-2642

พรีview โปรแกรมอัปเดตเฟิร์มแวร์ของ Lehmann: คู่มือการใช้งานสำหรับล็อคและเครื่องอ่าน RFID
เอกสารนี้ให้คำแนะนำการใช้งานซอฟต์แวร์ LEHMANN Firmware Updater โดยอธิบายรายละเอียดวิธีการอัปเดตเฟิร์มแวร์บนล็อค เครื่องอ่าน RFID และเทอร์มินัลของ Lehmann รวมถึงข้อกำหนดของระบบ ผลิตภัณฑ์ที่ใช้งานร่วมกันได้ และคำแนะนำทีละขั้นตอน
พรีview คู่มือผู้ใช้ซอฟต์แวร์การจัดการ LEHMANN: การกำหนดค่าและการใช้งาน
คู่มือผู้ใช้ LEHMANN Management Software (LMS) ฉบับสมบูรณ์ ครอบคลุมรายละเอียดการกำหนดค่า การใช้งาน และการจัดการระบบ RFID ของ LEHMANN ทั้งแบบออฟไลน์และออนไลน์ ครอบคลุมการจัดการทรานสพอนเดอร์และล็อก การตั้งค่าผู้ใช้ และการดูแลระบบ
พรีview โต๊ะหมุน CNC LEHMANN - ฉบับหลัก 4 | ซีรีส์ PGD, E, DD
LEHMANN's Main Catalog Edition 4 สำหรับโต๊ะหมุน CNC สำรวจ PGD, E-Series, DD Series และอื่นๆ โซลูชันความเร็วสูง ปราศจากการสั่นไหว สำหรับระบบอัตโนมัติทางอุตสาหกรรมและการผลิตที่แม่นยำ
พรีview คู่มือการใช้งานล็อคตู้ล็อกเกอร์อิเล็กทรอนิกส์ LEHMANN M610 LEGIC L043-A03
คู่มือการใช้งานฉบับสมบูรณ์สำหรับล็อคตู้ล็อกเกอร์อิเล็กทรอนิกส์ LEHMANN M610 LEGIC L043-A03 ครอบคลุมการติดตั้ง การตั้งโปรแกรม การใช้งาน การบำรุงรักษา และการแก้ไขปัญหา
พรีview โปรแกรม LEHMANN RFID Karten: ข้อมูลและความปลอดภัย
Erfahren Sie จาก Sie LEHMANN RFID-Schließsysteme ในด้านการติดตั้งและโปรแกรมผู้ใช้ Diese Anleitung erklärt ตาย Betriebsmodi, Funktionen und den Reset-Prozess.
พรีview คู่มือการใช้งานและคำแนะนำการใช้งานสำหรับล็อคแบบหมุนหมายเลข LEHMANN VERTO รุ่นลิขสิทธิ์ส่วนตัว (รหัสคงที่)
คู่มือการใช้งานและคำแนะนำการใช้งานอย่างละเอียดสำหรับล็อคประตูแบบหมุนรหัส LEHMANN VERTO รุ่นส่วนตัว (รหัสคงที่) เรียนรู้วิธีการตั้งค่า เปลี่ยน และรีเซ็ตรหัสผู้ใช้ รวมถึงวิธีการเปิดประตูในกรณีฉุกเฉิน