คู่มือผู้ใช้ชุดปากกา Geekvape Wenax S3 EVO Vape

1. บทนำ

The Geekvape Wenax S3 EVO Pod Kit is an advanced vaping device designed for ease of use and a satisfying experience. It features an upgraded Geekvape S Cartridge and enhanced LED indicators, offering precise control over airflow and output. This manual provides essential information for the safe and effective operation and maintenance of your device.

2. ข้อมูลด้านความปลอดภัย

This product is intended for use with nicotine-free e-liquids only. It does not contain nicotine, tobacco, or any related substances. Keep out of reach of children and pets.

• ห้ามให้อุปกรณ์สัมผัสกับอุณหภูมิที่สูงหรือต่ำเกินไป แสงแดดโดยตรง หรือน้ำ
• ห้ามถอดประกอบหรือดัดแปลงอุปกรณ์
• Use only the specified charging cable (Type-C) for charging.
• ทิ้งอุปกรณ์และตลับหมึกอย่างถูกวิธีตามระเบียบข้อบังคับท้องถิ่น
• If a puff lasts longer than 10 1 2 seconds, the red light will blink 3 times, and the device will stop working (Overtime Protection).
• In case of a short circuit, the red light will blink 8 times, and the device will stop working (Short-circuit Protection).

3. เนื้อหาบรรจุภัณฑ์

กรุณาตรวจสอบเนื้อหาแพ็คเกจเมื่อแกะกล่อง:

• 1x Geekvape WENAX S3 Evo Pod Kit 1100mAh Device
• 1x Geekvape S Cartridge (2ml) (0.81, Pre-installed)

4. สินค้าหมดview

The Wenax S3 EVO features a compact design with intelligent indicators and versatile cartridge options.

รูปที่ 4.1 : ด้านหน้า view of the Geekvape Wenax S3 EVO Vape Pen Kit in black, showcasinด้วยดีไซน์ที่เรียบหรูและไฟแสดงสถานะ LED

4.1 ความเข้ากันได้ของตลับหมึก

The Wenax S3 EVO is compatible with the new S cartridge, which offers three different drip tip options for varied vaping experiences.

Figure 4.2: Illustration showing the compatibility of the S cartridge across different Wenax devices, including Wenax Stylus, Wenax S3 EVO, and Wenax S-C.

4.2 Upgraded Geekvape S Cartridge

The upgraded S Cartridge is fully compatible with Soft-touch Drip Tip, Filter Drip Tip, and M1 Plastic Drip Tip. It supports 0.81 (14-18W) and 1.21 (9-13W) coil resistances.

รูปที่ 4.3: รายละเอียด view of the upgraded Geekvape S Cartridge, highlighting its compatibility with various drip tips and indicating the supported coil resistances.

4.3 Precise Airflow Adjustments

The device features a new airflow structure that allows for easier and more precise control of the airflow, contributing to a smoother flavor experience.

Figure 4.4: Visual representation of the airflow control mechanism on the Wenax S3 EVO, demonstrating how users can adjust it for optimal experience.

4.4 Upgraded Intelligent Indicator

The Wenax S3 EVO incorporates upgraded 3600 ring indicators, providing an intelligent and intuitive way to check the device status from any angle.

Figure 4.5: A close-up image of the device's base, showing the multi-color LED ring indicator that provides real-time status updates.

5. การตั้งค่า

5.1 การชาร์จอุปกรณ์

Before first use, fully charge the device. Connect the Type-C charging cable to the charging port located on the device and plug the other end into a suitable USB power source. The LED indicator will show charging status.

5.2 การติดตั้งตลับหมึก

Insert the Geekvape S Cartridge firmly into the top of the device until it clicks into place. Ensure the cartridge is properly seated to prevent leaks and ensure proper connection.

6. การดำเนินการ

6.1 การสูบบุหรี่ไฟฟ้า

The Wenax S3 EVO supports both auto-draw and button-activated vaping. Simply inhale from the drip tip or press the button while inhaling to activate the device.

6.2 3-Level Output Adjustments

Quickly press the button 3 times to switch between Low (Red), Med (Blue), and High (Green) output levels. This allows you to adjust the output for different airflow levels and enjoy various flavors.

Figure 6.1: Visual guide demonstrating how to cycle through the three output levels (Low, Medium, High) using the device's button, indicated by different LED colors.

6.3 โหมดบูสต์

Press the button to activate the maximum output for increased vapor production. This mode boosts the possibilities for flavor and vapor.

Figure 6.2: An image highlighting the button and its surrounding LED ring, illustrating the activation of Boost Mode for enhanced performance.

6.4 Battery Status Indications

The intelligent LED indicator provides clear battery status:

• แสงสีขาว: แบตเตอรี่เหลือ 0-30%
• แสงสีฟ้า: แบตเตอรี่เหลือ 31%-69%
• ไฟเขียว: แบตเตอรี่เหลือ 70%-100%

7. การบำรุงรักษา

7.1 การทำความสะอาด

Regularly clean the device, especially the cartridge connection area, with a dry cloth or cotton swab to prevent e-liquid buildup and ensure optimal performance.

7.2 การเปลี่ยนตลับหมึก

Replace the cartridge when you notice a burnt taste, reduced vapor production, or a change in flavor. Simply pull out the old cartridge and insert a new one.

8 การแก้ไขปัญหา

• Device not firing: Ensure the cartridge is properly installed and the battery is charged. Check for any error indications (red light blinks).
• No vapor or weak vapor: Check e-liquid level in the cartridge. Ensure the cartridge is not clogged. Try adjusting the output level.
• Burnt taste: Replace the cartridge. Ensure the cartridge is adequately primed before first use (allow e-liquid to soak for 5-10 minutes).
• การรั่วไหล: Ensure the cartridge is properly seated. Avoid overfilling the cartridge.
• Overtime Protection: If a puff lasts longer than 10 1 2 seconds, the red light will blink 3 times, and the device will stop working. This is a safety feature.
• การป้องกันการลัดวงจร: If a short circuit is detected, the red light will blink 8 times, and the device will stop working. Discontinue use and contact support if this persists.

9. ข้อมูลจำเพาะ

10. การรับประกันและการสนับสนุน

For warranty information and customer support, please refer to the official GEEKVAPE webหรือติดต่อผู้ค้าปลีกของคุณ โปรดเก็บหลักฐานการซื้อไว้เพื่อใช้ในกรณีที่ต้องการเคลมประกัน