Alfred DB1W-BL

Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W)

คู่มือการใช้งาน

1. สินค้าหมดview

The Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W) is an advanced security solution designed for residential use. This system combines a robust smart lock with a touchscreen keypad, Bluetooth connectivity, and a Wi-Fi Connect Bridge for remote access and smart home integration.

คุณสมบัติที่สำคัญ ได้แก่:

Alfred DB1W Smart Lock and Wi-Fi Connect Bridge

Image: The Alfred DB1W Smart Lock (left) and the Alfred Connect Wi-Fi Bridge (right), showcasing the complete system.

2. การตั้งค่าและการติดตั้ง

The Alfred DB1W Smart Lock is designed for easy DIY installation, replacing your existing deadbolt. For detailed, step-by-step visual instructions, it is highly recommended to use the BILT app.

2.1. รายการตรวจสอบก่อนการติดตั้ง

BILT App for 3D Interactive Instructions

Image: Screenshot of the BILT app interface, highlighting its 3D interactive instructions for assembly and installation. The app is available on both the App Store and Google Play.

2.2. การติดตั้งเครื่องกล

Follow the instructions provided by the BILT app or the included quick start guide to physically install the lock components onto your door. This typically involves removing your old deadbolt, installing the new latch, exterior keypad, interior assembly, and connecting the necessary cables.

ระเบิด view of Alfred DB1W Smart Lock components

ภาพ: ระเบิด view illustrating the various components of the Alfred DB1W Smart Lock, including the exterior keypad, interior assembly, deadbolt mechanism, and battery compartment, aiding in understanding the installation process.

2.3. การตั้งค่าและการจับคู่เบื้องต้น

  1. ติดตั้งแบตเตอรี่: Insert 4 AA alkaline batteries into the interior assembly of the lock.
  2. Download Alfred Home App: Download the "Alfred Home" app from your device's app store.
  3. สร้างบัญชี: Open the app and create a new user account or log in.
  4. เพิ่มอุปกรณ์: Follow the in-app instructions to add your DB1W smart lock. This typically involves putting the lock into pairing mode and connecting via Bluetooth.
  5. Install Alfred Connect Bridge: Plug the Alfred Connect Wi-Fi Bridge into a power outlet within close proximity to your smart lock and your Wi-Fi router. Follow the app's instructions to connect the bridge to your home Wi-Fi network and pair it with your lock.

3. การใช้งานสมาร์ทล็อคของคุณ

3.1. การทำงานของปุ่มกด

The touchscreen keypad allows for secure code-based entry.

Alfred DB1W Smart Lock Keypad

ภาพ: ภาพระยะใกล้ view of the Alfred DB1W Smart Lock's touchscreen keypad, showing the numerical layout and the Alfred logo.

3.2. Alfred Home App Control

The Alfred Home app provides comprehensive control and monitoring of your smart lock.

3.3. Voice Control (via Alfred Connect Bridge)

With the Alfred Connect Wi-Fi Bridge, you can integrate your lock with compatible smart speakers (e.g., Amazon Alexa, Google Assistant) for voice commands.

4. การบำรุงรักษา

4.1. การเปลี่ยนแบตเตอรี่

The Alfred DB1W Smart Lock operates on 4 AA alkaline batteries. The lock will provide a low battery warning through audible alerts and a visual indicator on the keypad (a battery icon). It is recommended to replace all four batteries simultaneously when this warning appears.

บันทึก: If batteries completely fail, the lock can be temporarily powered via a micro-USB port located on the bottom of the exterior keypad for emergency access. Connect a standard micro-USB power bank or charger to provide temporary power to enter your code.

4.2. การทำความสะอาด

To clean the touchscreen keypad and other surfaces, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.

5 การแก้ไขปัญหา

This section addresses common issues you might encounter with your Alfred DB1W Smart Lock.

ปัญหาสาเหตุที่เป็นไปได้สารละลาย
ล็อคไม่ตอบสนองต่อการกดแป้นพิมพ์Dead batteries; incorrect code; keypad not activated.Replace batteries; ensure correct code is entered; touch keypad to activate before entering code.
Alfred Connect Bridge frequently disconnects or fails to connect to lock/Wi-Fi.Poor Wi-Fi signal; interference; bridge too far from lock or router; temporary network issue.Relocate bridge closer to both lock and Wi-Fi router; ensure strong Wi-Fi signal; restart router and bridge; check for firmware updates for the bridge via the Alfred Home app.
ตัวล็อกไม่ตอบสนองต่อคำสั่งของแอปBluetooth/Wi-Fi off on phone; lock out of Bluetooth range; bridge disconnected; app issue.Ensure Bluetooth is on and you are within range for direct connection; verify bridge connection for remote access; restart app; reinstall app if persistent.
Low battery warning persists after battery replacement.Batteries not new or incorrect type; poor contact.Ensure new, high-quality alkaline batteries are used; check battery orientation and contacts.
Lock is jammed or difficult to operate manually.Misalignment during installation; door frame issues.Check door and frame alignment; ensure deadbolt moves freely without obstruction. Re-check installation steps if necessary.

5.1. รีเซ็ตเป็นค่าโรงงาน

A factory reset will erase all user codes and settings, restoring the lock to its original state. Refer to the Alfred Home app or the official Alfred support website for specific instructions on performing a factory reset for your DB1W model, as the procedure may vary slightly.

6. ข้อมูลจำเพาะ

คุณสมบัติรายละเอียด
ยี่ห้ออัลเฟรด
หมายเลขรุ่นDB1W-BL
สีสีดำ
แหล่งพลังงานใช้พลังงานจากแบตเตอรี่ (อัลคาไลน์ AA 4 ก้อน)
เทคโนโลยีการเชื่อมต่อBluetooth, Wi-Fi (via Alfred Connect Bridge)
อุปกรณ์ที่รองรับSmartphone, Smart Speaker
ขนาดรายการ (ยาว x กว้าง x สูง)0.55 x 2.56 x 5.91 นิ้ว
น้ำหนักสินค้า4 ปอนด์
วัสดุโลหะ
ประเภทการติดตั้งDIY ไร้สาย
ส่วนประกอบที่รวมอยู่Alfred Connect WIFI Integration Accessory, DB1-A Bluetooth enabled smart lock, Alfred Home App
ยูพีซี628341330138

7. การรับประกันและการสนับสนุน

For warranty information, technical support, or further assistance, please contact Alfred International Inc., the manufacturer of this product.

Additional protection plans may be available for purchase from retailers. Please refer to your purchase documentation for details on any extended warranties or service agreements.

เอกสารที่เกี่ยวข้อง - DB1W-BL

พรีview คู่มือผู้ใช้ Alfred Connect V2: คำแนะนำการเริ่มต้นและการตั้งค่าอย่างรวดเร็ว
เริ่มต้นใช้งาน Alfred Connect V2 Wi-Fi Bridge ของคุณ คู่มือนี้ครอบคลุมการดาวน์โหลดแอป การจับคู่อุปกรณ์ ไฟแสดงสถานะ ขั้นตอนการรีเซ็ต และการผสานรวมระบบผู้ช่วยเสียง เพื่อประสบการณ์บ้านอัจฉริยะที่ราบรื่น
พรีview คู่มือเริ่มต้นใช้งานด่วนสำหรับระบบสัมผัสหน้าจออัจฉริยะ Alfred DB2 Series
คู่มือเริ่มต้นใช้งานฉบับย่อสำหรับกลอนประตูอัจฉริยะแบบหน้าจอสัมผัส Alfred DB2 Series ครอบคลุมการติดตั้ง การตั้งค่าแอป การจัดการรหัส PIN และการใช้งานพื้นฐาน เรียนรู้วิธีการตั้งค่ากลอนประตูอัจฉริยะ จัดการรหัส PIN ของผู้ใช้ และใช้งานกลอนประตู
พรีview คู่มือเริ่มต้นใช้งานด่วน Alfred Connect V2
คู่มือย่อในการตั้งค่า Alfred Connect V2 WIFI bridge สำหรับ Alfred Smart Locks รวมไปถึงการดาวน์โหลดแอป การเชื่อมต่ออุปกรณ์ ตัวบ่งชี้ และการผสานรวมผู้ช่วยเสียง
พรีview คู่มือเริ่มต้นใช้งานด่วน Alfred DB2S Smart Lock
เริ่มต้นใช้งาน Alfred DB2S Smart Home Touchscreen Deadbolt ใหม่ของคุณ คู่มือเริ่มต้นใช้งานฉบับย่อนี้ให้คำแนะนำเกี่ยวกับการตั้งค่าล็อค การจัดการรหัส PIN การใช้งาน และการติดตั้ง
พรีview คู่มือการตั้งโปรแกรมสมาร์ทล็อค Alfred DB1S Series - คู่มือการตั้งค่าสมาร์ทล็อค
Comprehensive programming instructions and setup guide for the Alfred DB1S Series smart lock. Learn how to install, program PIN codes, use features like Auto Re-lock and Away Mode, and troubleshoot your Alfred smart lock.
พรีview Alfred DB1 Series Smart Lock Programming Instructions
Comprehensive programming instructions for the Alfred DB1 Series smart lock, covering initial setup, user PIN management, various operational modes like Away and Silent Mode, Bluetooth and Z-Wave settings, and troubleshooting.