การแนะนำ
This manual provides instructions for the Fdit Water Bottle Dispenser Faucet Spout Jug, designed for convenient dispensing of water from 5-gallon bottled water containers. It features a practical design for easy use and is constructed from high-quality, environmentally friendly PP material, ensuring it is non-toxic and odorless. The dispenser incorporates a multi-layer silicone sealing ring to prevent leaks and includes a dust-proof cap to maintain the hygiene of your drinking water.
Image: The Fdit Water Bottle Dispenser.
การตั้งค่า
Before initial use, ensure all components are clean. The dispenser is designed for straightforward installation on standard 5-gallon water bottle openings.
Prepare the Water Bottle: If your water bottle has a sealed lid, carefully remove it. A tool may be used to assist in prying open the lid.
Image: Removing the water bottle lid.
เปิดเครื่องจ่าย: Rotate the upper part of the dispenser clockwise until it is fully open. This prepares the dispenser for insertion onto the bottle.
Image: Step-by-step installation guide, showing the dispenser being opened.
Insert the Dispenser: Press the pump dispenser firmly into the mouth of the water bottle. Ensure it is seated securely and straight.
Image: Inserting the dispenser onto the water bottle.
รักษาความปลอดภัยของเครื่องจ่าย: Rotate the upper end of the dispenser clockwise until it is fully fixed and a tight seal is achieved. The built-in multi-layer silicone sealing ring will ensure no leakage after installation.
Image: Step-by-step installation guide, showing the dispenser being secured.
คำแนะนำการใช้งาน
Once properly installed, the dispenser is ready for use. The spout features a simple lever mechanism for controlled water flow.
To dispense water, simply press down on the lever located on the side of the spout. Water will flow out. Release the lever to stop the flow. Always ensure the dust-proof cap is closed when the dispenser is not in use to protect the drinking water from contaminants.
Image: Dispensing water into a cup.
Image: Hand operating the dispenser lever.
การซ่อมบำรุง
Regular cleaning is essential to ensure the longevity and hygiene of your water bottle dispenser.
การทำความสะอาด: Periodically remove the dispenser from the water bottle. Wash all components with mild soap and warm water. Rinse thoroughly to remove any soap residue.
การอบแห้ง: Allow all parts to air dry completely before reassembling and reattaching to a water bottle.
พื้นที่จัดเก็บ: When not in use for extended periods, store the dispenser in a clean, dry place away from direct sunlight.
การแก้ไขปัญหา
If you encounter issues with your dispenser, refer to the following common problems and solutions.
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Water leakage from the seal. | Dispenser not fully tightened or silicone ring is misplaced/damaged. | Ensure the dispenser is rotated clockwise until fully fixed and tight. Check the silicone sealing ring for proper placement and condition. |
| Slow or no water flow. | Spout blocked or air pressure issue. | Check the spout for any obstructions. Ensure the bottle is properly inverted and there is no vacuum preventing flow. |
| Dust or debris on the spout. | Dust cap not used or improperly closed. | Always ensure the dust-proof cap is securely closed when the dispenser is not in active use. Clean the spout as per maintenance instructions. |
ข้อมูลจำเพาะ
Detailed specifications for the Fdit Water Bottle Dispenser Faucet Spout Jug:
ยี่ห้อ: ฟดิต
หมายเลขรุ่น: Fditdspz6aby1o
วัสดุ: โพลิโพรพิลีน (PP)
สี: สีขาว
ความจุ: Designed for 5 Gallon water bottles
ขนาดสินค้า : ลึก 3.5 นิ้ว x กว้าง 1.08 นิ้ว x สูง 3.5 นิ้ว
น้ำหนักสินค้า: 2.19 ออนซ์
ประเภทการติดตั้ง: ติดบนพื้นผิว
ประเทศต้นกำเนิด: จีน
ภาพ: ขนาดผลิตภัณฑ์
การรับประกันและการสนับสนุน
For product support or warranty inquiries, please contact the manufacturer, Fdit, directly. Refer to your purchase documentation for specific warranty terms and contact information.
ผู้ผลิต: ฟดิต
ASIN: B0C78P4R39
วันที่เข้าใช้งานครั้งแรก: วันที่ 6 มิถุนายน 2023