Frizzlife TAM4 Replacement Filter Kit Instruction Manual

1. บทนำ

This manual provides essential information for the installation, operation, and maintenance of your Frizzlife TAM4 Replacement Filter Kit. The TAM4 filter is designed as a 3rd stage and alkaline remineralization filter for Frizzlife PD800-TAM4 and PD1000-TAM4 Reverse Osmosis (RO) systems. It is engineered to balance the pH level of purified water, restore essential minerals, and enhance taste.

2. ข้อมูลด้านความปลอดภัย

• คุณภาพน้ำ: Do not use this filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
• อุณหภูมิ: This filter is designed for COLD WATER ONLY. Operating temperature range is Min. 39°F (4°C) to Max. 100°F (38°C).
• ความดัน: Ensure working pressure is between 20psi and 80psi.
• การติดตั้ง: Always turn off the water supply and relieve system pressure before attempting any filter replacement.
• ตรวจสอบรอยรั่ว: After installation, carefully check for any leaks.

3. สินค้าหมดview

The Frizzlife TAM4 filter kit is a crucial component for your RO system, providing a 3-in-1 compounded filtration process. It includes Alkaline Particles, Mineral Substances, and a Carbon Block to address common characteristics of RO water.

คุณสมบัติหลัก:

• pH Balance: Increases the pH level of RO water to over 7.5, aligning with the body's natural pH.
• Mineral Restoration: Reintroduces essential minerals such as Zinc, Calcium, Dietary Iron, Magnesium, and Potassium.
• Taste Enhancement: The carbon block component refines water taste and removes residual odors.
• ติดตั้งง่าย: Features a twist-in design and auto shut-off for quick and tool-free replacement.
• อายุการใช้งานยาวนาน: Each cartridge can filter approximately 900-1000 gallons, typically lasting up to one year.

ภาพที่ 1: Frizzlife TAM4 Replacement Filter Cartridge. This image displays the Frizzlife TAM4 replacement filter cartridge, highlighting its label with model number, replacement period, operating conditions, and warnings.

ภาพที่ 2: Frizzlife TAM4 Filter Kit with Housing and Connectors. This image shows the Frizzlife TAM4 replacement filter alongside its housing unit and connection tubes, illustrating how it integrates into the RO system.

4. ข้อมูลจำเพาะ

5. คำแนะนำในการติดตั้ง

Follow these steps to replace your Frizzlife TAM4 filter cartridge. The system features an auto shut-off design, meaning you typically do not need to turn off the main water supply, but it is always recommended as a safety precaution.

1. เตรียมการเปลี่ยน: Ensure you have the correct Frizzlife TAM4 replacement filter. It is recommended to place a towel or small basin under the filter housing to catch any residual water.
2. ค้นหาตัวกรอง: Identify the TAM4 filter cartridge within your PD800-TAM4 or PD1000-TAM4 RO system.
3. ลบตัวกรองเก่า: Grasp the old filter cartridge firmly and twist it counter-clockwise to unlock it from the filter head. The auto shut-off valve will engage, stopping water flow. Pull the cartridge downwards to remove it.
4. ติดตั้งตัวกรองใหม่: Remove the protective caps from the new TAM4 filter cartridge. Align the top of the new cartridge with the filter head. Push the cartridge upwards and twist it clockwise until it locks securely into place. You should feel a click or firm stop.
5. ตรวจสอบการรั่วไหล: Slowly turn on the water supply (if you turned it off). Observe the newly installed filter for a few minutes to ensure there are no leaks.
6. ล้างตัวกรอง: Run water through the system for approximately 5-10 minutes to flush out any carbon fines and air from the new filter. This also helps to activate the filter media.

ภาพที่ 3: Frizzlife TAM4 Filter Twist-in Replacement Diagram. A diagram illustrating the '1-second twist change' mechanism for replacing the FZ-4 Alkaline/Remineralize Filter. It shows the filter twisting into the housing and notes that changing only the inner core is recommended for environmental reasons, but purchasing a full kit is an easier alternative if unscrewing is difficult.

6. การบำรุงรักษา

Regular maintenance ensures optimal performance and longevity of your Frizzlife TAM4 filter and RO system.

การเปลี่ยนตัวกรอง:

• The TAM4 filter cartridge should be replaced every 900-1000 gallons or approximately once a year, whichever comes first.
• Actual replacement frequency may vary based on your local water quality and water usage.
• Note on TDS: The remineralization process of the TAM4 filter adds beneficial minerals back into the water. This may result in a slightly higher Total Dissolved Solids (TDS) reading compared to pure RO water. This is normal and indicates the filter is functioning as intended by enriching the water with minerals.

7 การแก้ไขปัญหา

If you encounter any issues with your Frizzlife TAM4 filter or RO system, please refer to the following common troubleshooting tips:

• อัตราการไหลของน้ำต่ำ:
  • Ensure the water supply valve to the RO system is fully open.
  • Check if the filter cartridge is installed correctly and securely.
  • A clogged filter can cause low flow. If the filter is past its recommended service life, replace it.
• การรั่วไหล:
  • ปิดวาล์วน้ำทันที
  • Verify that the filter cartridge is twisted in completely and seated properly.
  • ตรวจสอบการเชื่อมต่อทั้งหมดว่าแน่นหนาหรือไม่
• รสชาติหรือกลิ่นผิดปกติ:
  • Ensure the filter has been properly flushed after installation.
  • If the filter is old, it may be exhausted and require replacement.

If these steps do not resolve the issue, please contact Frizzlife customer support for further assistance.

8. การรับประกันและการสนับสนุน

Frizzlife products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided with your original Frizzlife RO system or visit the official Frizzlife webเว็บไซต์.

For technical support, questions, or to purchase replacement parts, please contact us:

• อีเมล: support@frizzlife.com
• Webเว็บไซต์: Visit the official Frizzlife webเว็บไซต์สำหรับข้อมูลและทรัพยากรเพิ่มเติม