Okin 2-Pin Y Splitter Cable Power Cord Replacement (4.6ft & 0.66ft)

1. สินค้าหมดview

The Okin 2-Pin Y Splitter Cable is designed to provide a multi-functional power solution for electric furniture. This cable allows a single power supply transformer to power two motors simultaneously, commonly found in electric recliners and lift chairs. It features a 2-pin hybrid plug (one round, one flat) for connection to the transformer and two 2-pin sockets with clips for motor attachment. This product is ideal for replacing damaged cords or expanding existing power systems.

Image 1: The Okin 2-Pin Y Splitter Cable, showing the main cable and two branch cables.

2. ข้อมูลด้านความปลอดภัย

Always disconnect power from the main power supply before installing or removing the splitter cable.
Ensure all connections are secure and free from damage before restoring power.
อย่าให้สายเคเบิลโดนน้ำหรือความชื้นมากเกินไป
Avoid placing heavy objects on the cable or bending it sharply, as this can cause damage.
If the cable appears damaged, discontinue use immediately and replace it.

3. เนื้อหาบรรจุภัณฑ์

1 x Okin 2-Pin Y Splitter Cable Power Cord (Main cable: 4.6 ft, Branch cables: 55 inches and 8 inches)

Note: Motor and transformer are not included.

4. การตั้งค่าและการติดตั้ง

Follow these steps to correctly install your Okin Y Splitter Cable:

ตัดการเชื่อมต่อไฟฟ้า: Ensure the electric recliner or lift chair is unplugged from the wall outlet to prevent electrical hazards.
ระบุการเชื่อมต่อ: Locate the power supply transformer and the motor connection ports on your electric furniture.
เชื่อมต่อกับหม้อแปลง: Take the 2-pin hybrid plug (one round, one flat) of the Okin Y splitter cable and securely connect it to the output port of your power supply transformer.
Connect to Motors: Attach each of the two 2-pin sockets with clips from the Y splitter cable to the corresponding input ports on your recliner motors. Ensure the clips are fully engaged for a secure connection.
จัดระเบียบสายเคเบิล: Route the cables neatly to avoid pinching or tripping hazards.
คืนค่าพลัง: Once all connections are secure, plug the electric recliner or lift chair back into the wall outlet.

Diagram showing Okin Y Splitter Cable connections to transformer and motors

Image 2: Connection diagram illustrating how to connect the Y splitter cable to a power supply transformer and two recliner motors.

5. คู่มือการใช้งาน

Once the Okin Y Splitter Cable is correctly installed, the operation of your electric recliner or lift chair remains unchanged. Use the existing controls (hand remote or integrated buttons) of your furniture to operate the motors as usual. The splitter cable simply facilitates power distribution from a single source to two motors.

6. การบำรุงรักษา

การทำความสะอาด: Wipe the cable with a dry, soft cloth. Do not use liquid cleaners.
การตรวจสอบ: Periodically inspect the cable for any signs of wear, cuts, or damage to the insulation or connectors.
พื้นที่จัดเก็บ: If storing the cable, coil it loosely. Avoid tight coiling or kinking, which can damage the internal wires.
สิ่งแวดล้อม: Keep the cable away from extreme temperatures, direct sunlight, and areas where it might be chewed by pets or damaged by furniture movement.

7 การแก้ไขปัญหา

ปัญหา	สาเหตุที่เป็นไปได้	สารละลาย
No power to either motor.	Main power supply unplugged. Faulty power supply transformer. Y splitter cable not securely connected to transformer. Damaged Y splitter cable.	Check wall outlet and main power cord. Test transformer with a single motor if possible, or replace. Ensure the 2-pin hybrid plug is fully inserted into the transformer. Inspect cable for visible damage; replace if necessary.
Only one motor receives power.	Loose connection to the non-working motor. มอเตอร์ชำรุด Damage to one branch of the Y splitter cable.	Check the 2-pin socket connection to the non-working motor. Test the motor directly if possible, or swap connections to isolate the issue. Inspect the specific branch cable for damage; replace the Y splitter if damaged.

8. ข้อมูลจำเพาะ

หมายเลขรุ่น: R5.216.01.024D
Main Cable Length: 1.4 เมตร (4.6 ฟุต)
Branch Cable Lengths: 140 ซม. (55 นิ้ว) และ 20 ซม. (8 นิ้ว)
Connector Type (Input): 2-pin hybrid plug (one round, one flat)
Connector Type (Output): Two 2-pin sockets with clips
วัสดุ: High-quality pure copper core
น้ำหนักสินค้า: ประมาณ 2.89 ออนซ์
ขนาดแพ็คเกจ: 8.7 x 6.34 x 1.14 นิ้ว

9. ความเข้ากันได้

This Okin 2-Pin Y Splitter Cable is compatible with a wide range of electric recliners and lift chairs that utilize a 2-pin hybrid connection for their power supply and motors. Known compatible brands include:

โอกิน
Dewert
Lazyboy
ความภาคภูมิใจ
Catnapper
Limoss

Always verify the plug design of your existing components to ensure compatibility before purchase.

10. การรับประกันและการสนับสนุน

For any questions, concerns, or support regarding your Okin 2-Pin Y Splitter Cable, please contact Okin customer service. Refer to your product packaging or the Okin official webเว็บไซต์สำหรับข้อมูลติดต่อและรายละเอียดการรับประกันล่าสุด

Okin R5.216.01.024D