1. บทนำ
This manual provides detailed instructions for the proper use, application, and maintenance of AK Interactive AK WARGAME Liquid Pigments, specifically the Green Oxide (AK1212) variant. Adhering to these guidelines will ensure optimal results and longevity of your models and tools. Please read this manual thoroughly before beginning any application.
2. สินค้าหมดview
The AK WARGAME Liquid Pigments Green Oxide (AK1212) is a high-quality enamel-based liquid pigment designed for weathering and detailing wargame models, dioramas, and other scale models. This 35ml bottle contains a concentrated pigment that offers a self-fixing, matt finish when applied correctly. It is formulated to provide realistic effects and can be diluted for various application techniques.
Figure 1: AK WARGAME Liquid Pigments Green Oxide (AK1212) 35ml bottle. The label indicates it is an enamel liquid pigment, Green Oxide color, and can be diluted with enamel thinner for a self-fixing, matt finish.
3. การตั้งค่าและการเตรียมการ
3.1 ข้อควรระวังเพื่อความปลอดภัย
- ทำงานในบริเวณที่มีอากาศถ่ายเทสะดวกเพื่อหลีกเลี่ยงการสูดดมควัน
- Wear appropriate personal protective equipment, such as gloves and a respirator, especially when airbrushing.
- เก็บให้พ้นจากมือเด็กและสัตว์เลี้ยง
- Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if irritation persists.
3.2 การเตรียมพื้นผิว
Ensure the model surface is clean, dry, and free of dust, grease, or other contaminants. A properly prepared surface will ensure optimal adhesion and finish of the pigment.
3.3 Dilution
This liquid pigment can be diluted with enamel thinner. The dilution ratio depends on the desired effect and application method (brush or airbrush). Start with a small amount of thinner and gradually add more until the desired consistency is achieved. For airbrushing, a thinner consistency is generally required.
4. คู่มือการใช้งาน (แอปพลิเคชัน)
4.1 Shaking the Bottle
Before each use, shake the bottle thoroughly to ensure the pigment is uniformly mixed. Pigments can settle over time, and proper mixing is crucial for consistent color and performance.
4.2 วิธีการประยุกต์ใช้
- การทาด้วยแปรง: Apply the pigment directly or diluted with a brush to create weathering effects, streaks, or dirt accumulation. Use a fine brush for precise details and a broader brush for larger areas.
- Airbrush Application: For airbrushing, dilute the pigment with enamel thinner to a milk-like consistency. Apply in thin, even coats to build up the desired effect. Maintain a consistent distance and pressure for smooth coverage.
4.3 Drying Time and Finish
The pigment is self-fixing and dries to a matt finish. Drying time can vary depending on humidity, temperature, and the thickness of the applied layer. Allow sufficient time for each layer to dry before applying subsequent coats or handling the model. Typically, touch-dry in minutes, fully cured in hours.
Figure 2: A swatch demonstrating the Green Oxide pigment color and texture when applied. This illustrates the typical appearance of the pigment.
5. การบำรุงรักษา
5.1 เครื่องมือทำความสะอาด
Immediately after use, clean brushes and airbrushes with enamel thinner or a dedicated cleaner suitable for enamel paints. Do not allow the pigment to dry on tools, as it can be difficult to remove.
5.2 พื้นที่จัดเก็บ
Store the pigment bottle upright in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed after each use to prevent drying and contamination. Proper storage helps maintain the pigment's quality and extends its shelf life.
6 การแก้ไขปัญหา
- การใช้งานที่ไม่สม่ำเสมอ: Ensure the surface is clean and properly prepared. Adjust dilution ratio and application technique (e.g., thinner coats for airbrushing, even brush strokes).
- Clogging (Airbrush): This often indicates insufficient dilution or dried pigment in the nozzle. Clean the airbrush thoroughly and ensure proper dilution before use.
- Pigment Drying Too Fast: Work in smaller sections or consider slightly increasing dilution. High temperatures or low humidity can accelerate drying.
- การยึดเกาะที่ไม่ดี: Ensure the surface is free of oils, dust, and other residues. A primer might be necessary for certain materials.
7. ข้อมูลจำเพาะ
- ชื่อสินค้า : AK WARGAME Liquid Pigments Green Oxide
- หมายเลขรุ่น: AK-AK1212
- ยี่ห้อ: เอเค อินเตอร์แอคทีฟ
- ปริมาณ: 35มล.
- พิมพ์: Enamel Liquid Pigment
- เสร็จ: Matt, Self-fixing
- การเจือจาง: Requires Enamel Thinner
- วันที่เข้าใช้งานครั้งแรก: วันที่ 11 มิถุนายน 2023
8. การรับประกันและการสนับสนุน
AK Interactive products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the official AK Interactive webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง โปรดเก็บใบเสร็จรับเงินไว้เป็นหลักฐานการซื้อ
ผู้ผลิต: เอเค อินเตอร์แอคทีฟ
หากต้องการความช่วยเหลือเพิ่มเติม โปรดไปที่: www.ak-interactive.com
