Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI FTW3 Ultra Water Block Manual

1. บทนำ

This manual provides detailed instructions for the installation, operation, and maintenance of the Alphacool Eisblock Aurora Acryl GPX-N water block for NVIDIA RTX 3090 TI FTW3 Ultra graphics cards. This product is designed to provide efficient liquid cooling for your graphics card's critical components, including the GPU, VRAM, and VRMs, and features integrated digital RGB lighting.

2. ข้อมูลด้านความปลอดภัย

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in product damage, system damage, or personal injury.

• Ensure your computer system is powered off and disconnected from the main power supply before beginning installation.
• จัดการส่วนประกอบต่างๆ ด้วยความระมัดระวังเพื่อหลีกเลี่ยงความเสียหาย
• Use appropriate tools and follow anti-static precautions.
• Perform a leak test before powering on your system after installation.
• เก็บให้พ้นจากมือเด็ก

3. เนื้อหาบรรจุภัณฑ์

Verify that all components are present before proceeding with the installation:

• Alphacool Eisblock Aurora Acryl GPX-N Water Block
• แผ่นหลัง
• สกรูยึดและแหวนรอง
• แผ่นความร้อน
• น้ำยาหล่อเย็น
• Digital RGB Adapter Cable
• คู่มือการติดตั้ง (เอกสารนี้)

4. การตั้งค่าและการติดตั้ง

This section details the steps required to install the water block onto your NVIDIA RTX 3090 TI FTW3 Ultra graphics card.

4.1. การเตรียมพร้อม

1. Carefully remove your graphics card from your computer system.
2. Remove the stock cooler and backplate from the graphics card. Refer to your graphics card manufacturer's instructions for this step.
3. Clean the GPU die and all VRAM/VRM components thoroughly to remove any old thermal paste or residue using isopropyl alcohol and a lint-free cloth.

4.2. Applying Thermal Pads and Paste

1. Cut the provided thermal pads according to the dimensions specified in the included diagram (if applicable) or the water block's instructions for your specific GPU model.
2. Apply the thermal pads to the VRAM and VRM components on the graphics card PCB. Ensure full coverage and good contact.
3. Apply a small amount of thermal paste to the center of the GPU die. A pea-sized amount is typically sufficient.

4.3. Mounting the Water Block

1. Carefully align the water block with the mounting holes on the graphics card PCB. Ensure the GPU die makes contact with the copper cold plate and all thermal pads are properly seated.
2. Gently lower the water block onto the graphics card.
3. Secure the water block using the provided mounting screws and washers. Tighten screws in a diagonal pattern to ensure even pressure, but do not overtighten.

รูปที่ 1: ด้านบน view of the Alphacool Eisblock Aurora Acryl GPX-N Water Block, showing the clear acrylic top and internal cooling channels.

4.4. Installing the Backplate

1. Align the backplate with the corresponding mounting holes on the rear of the graphics card PCB.
2. Secure the backplate using the designated screws.

Figure 2: The Alphacool Eisblock Aurora Acryl GPX-N Backplate, designed to cover the rear of the graphics card PCB.

Figure 3: The Alphacool Eisblock Aurora Acryl GPX-N Water Block with the backplate installed, showing the complete assembly.

4.5. Connecting Digital RGB Lighting

1. Connect the digital RGB cable from the water block to the appropriate 3-pin 5V addressable RGB header on your motherboard or a compatible RGB controller.
2. Ensure the connector is oriented correctly to avoid damage.

4.6. Integrating into the Cooling Loop

1. Install appropriate fittings (not included) into the G1/4" ports on the water block.
2. Connect the water block into your existing or new custom liquid cooling loop using compatible tubing.
3. Ensure all connections are secure and fittings are tightened to prevent leaks.

4.7. การทดสอบการรั่วซึม

1. Before powering on your computer, fill your liquid cooling loop with coolant.
2. Use a dedicated leak testing tool or run the pump independently (without powering the rest of the system) for at least 24 hours.
3. Visually inspect all connections and components for any signs of leaks. Address any leaks immediately before proceeding.

5. คู่มือการใช้งาน

Once the water block is successfully installed and leak-tested, you can power on your system. The water block will passively cool your GPU as long as the liquid cooling loop is operational.

• Monitor your GPU temperatures using appropriate software to ensure optimal cooling performance.
• Manage the digital RGB lighting effects through your motherboard's software or a connected RGB controller.

6. การบำรุงรักษา

Regular maintenance is crucial for the longevity and performance of your liquid cooling system.

• การเปลี่ยนน้ำหล่อเย็น: It is recommended to replace the coolant in your loop every 6-12 months, depending on the coolant type and usage.
• การทำความสะอาดระบบ: Periodically inspect the water block and other loop components for any signs of buildup or discoloration. If necessary, drain the loop and clean components with distilled water or a specialized cleaning solution.
• การตรวจสอบภาพ: Regularly check tubing and fittings for wear, cracks, or loose connections.

7 การแก้ไขปัญหา

หัวข้อนี้จะกล่าวถึงปัญหาทั่วไปที่คุณอาจพบเจอ

7.1. High GPU Temperatures

• ตรวจสอบการทำงานของปั๊ม: Ensure your pump is running and circulating coolant.
• ฟองอากาศ: Bleed any air bubbles from the loop. Tilt your system gently to help move air to the reservoir.
• Thermal Paste/Pads: Verify that thermal paste was applied correctly and thermal pads are making good contact. Re-seat the water block if necessary.
• Radiator Performance: Ensure your radiator fans are spinning and the radiator fins are clean and unobstructed.

7.2. การรั่วไหล

• Identify Source: Immediately power off your system and locate the source of the leak.
• กระชับฟิตติ้ง: Ensure all fittings are securely tightened. Do not overtighten.
• ตรวจสอบท่อ: Check tubing for cuts, cracks, or improper seating. Replace damaged tubing.

7.3. ไฟ RGB ไม่ทำงาน

• ตรวจสอบการเชื่อมต่อ: Ensure the 3-pin 5V ARGB cable is correctly connected to the motherboard or controller.
• การกำหนดค่าซอฟต์แวร์: Verify that your motherboard's RGB software or external controller is properly configured and enabled.
• พลัง: Confirm the ARGB header on your motherboard is receiving power.

8. ข้อมูลจำเพาะ

9. การรับประกันและการสนับสนุน

Alphacool products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Alphacool webหรือติดต่อผู้ค้าปลีกของคุณ เก็บหลักฐานการซื้อไว้เพื่อใช้ในการเรียกร้องการรับประกัน

หากต้องการความช่วยเหลือเพิ่มเติม โปรดไปที่ Alphacool Store on Amazon.