คู่มือผู้ใช้รีโมทคอนโทรลหรี่ไฟ 4 โซน รุ่น LM007 จาก BTF-LIGHTING

1. สินค้าหมดview

The BTF-LIGHTING LM007 is a 2.4G RF wireless remote controller designed for dimming and color temperature (CCT) adjustment of compatible LED lighting systems. It features 4-zone control, allowing independent management of multiple lighting groups. This remote is powered by two AAA batteries and offers a control distance of up to 30 meters (98 feet).

It is compatible with various BTF-LIGHTING and Mi-Boxer/Mi-Light brand single color and CCT (Dual White) controllers, including models like C01RF, C01W, C02RF, C02W, WB5, LM052, LM053, LM051, WL5, LS2, FUT036S, and others.

Image 1: The BTF-LIGHTING LM007 remote controller shown with its packaging and included wall mount bracket.

Image 2: The LM007 remote controller held in hand, illustrating its ergonomic design and compact size.

2. คำแนะนำในการตั้งค่า

2.1 การติดตั้งแบตเตอรี่

The LM007 remote controller requires two AAA batteries (3V) for operation. Ensure correct polarity when inserting the batteries.

1. เปิดฝาครอบช่องใส่แบตเตอรี่ที่ด้านหลังของรีโมทคอนโทรล
2. Insert two AAA batteries, observing the positive (+) and negative (-) terminals.
3. ปิดฝาช่องใส่แบตเตอรี่ให้แน่น

2.2 Linking the Remote to a Controller

To control your LED lights, the LM007 remote must be linked to a compatible LED controller (e.g., WB5, LM052, C01RF). This process typically involves a pairing sequence:

1. โปรดตรวจสอบให้แน่ใจว่าตัวควบคุม LED ปิดอยู่
2. เปิดสวิตช์ควบคุม LED
3. Within 3 seconds of powering on the controller, press the "ON" button for the desired zone (1-4) on the LM007 remote three times.
4. The LED lights connected to the controller should flash three times, indicating successful linking.
5. If linking fails, repeat the steps. Ensure the remote is within range of the controller.

To unlink a controller from a zone, follow the same steps but press the "ON" button five times within 3 seconds of powering on the controller. The lights will flash ten times to confirm unlinking.

ภาพที่ 3: อดีตamples of compatible CCT (Dual White) LED controllers that can be paired with the LM007 remote.

3. คู่มือการใช้งาน

The LM007 remote provides intuitive control over your linked LED lighting zones. Refer to the button layout below for specific functions.

Image 4: Detailed button layout and dimensions of the LM007 remote controller.

3.1 การควบคุมหลัก

• บน: Master ON button. Turns on all linked zones.
• ปิด: Master OFF button. Turns off all linked zones.

ระบบควบคุม 3.2 โซน

• Zone 1-4 ON/(un)link Button: Press to turn on a specific zone. Press and hold during linking process to link/unlink a controller to that zone.
• Zone 1-4 OFF/Night Light Mode: Press to turn off a specific zone. Press and hold to activate Night Light mode for that zone (if supported by the controller).

Image 5: Diagram illustrating the 2.4GHz wireless transmission and 4-zone control capability, allowing control of different areas within a 30-meter range.

ภาพที่ 6: อดีตample of group setting and control, demonstrating how multiple controllers can be assigned to different zones for comprehensive lighting management.

3.3 Brightness and Color Temperature Adjustment

• แถบเลื่อนปรับอุณหภูมิสี: Touch the color wheel to adjust the color temperature from warm white (e.g., 3000K) to cool white (e.g., 6000K). This function requires a CCT (Dual White) LED strip with 3 wires (V+ WW CW).
• ความสว่าง + / -: เพิ่มหรือลดระดับความสว่าง
• 30% / 60% / 100% Brightness: Quick access buttons for preset brightness levels.
• การสลับแสงสีขาวโทนเย็น-โทนอุ่น: Toggles between cold white and warm white modes.

Image 7: Demonstration of adjusting color temperature from 3000K (warm white) to 6000K (cool white) using the remote's touch slider.

3.4 Dynamic Modes and Speed

• โหมดไดนามิก (M): Cycles through various pre-programmed dynamic lighting modes (e.g., fading, flashing).
• Speed + / -: Adjusts the speed of the active dynamic lighting mode.

4. ข้อมูลจำเพาะ

5. การบำรุงรักษา

Proper maintenance ensures the longevity and optimal performance of your LM007 remote controller.

• การเปลี่ยนแบตเตอรี่: Replace batteries when the remote's response becomes sluggish or inconsistent. Always use fresh AAA batteries.
• การทำความสะอาด: Wipe the remote with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• พื้นที่จัดเก็บ: Store the remote in a dry environment, away from extreme temperatures and direct sunlight. If storing for extended periods, remove the batteries to prevent leakage.

6 การแก้ไขปัญหา

If you encounter issues with your LM007 remote controller, refer to the following common troubleshooting steps:

• รีโมตไม่ตอบสนอง:
  • ตรวจสอบว่าติดตั้งแบตเตอรี่อย่างถูกต้องและมีประจุเพียงพอ เปลี่ยนแบตเตอรี่หากจำเป็น
  • Ensure the remote is within the specified control distance (30 meters) of the LED controller.
  • Verify that the remote is linked to the correct zone on the LED controller.
• Lights Not Responding to Specific Zone:
  • Confirm that the LED controller is properly linked to the desired zone on the remote. If unsure, try unlinking and relinking the controller.
  • Ensure the LED controller itself is powered on and functioning correctly.
• Color Temperature or Dimming Not Working:
  • Ensure your LED strip is a CCT (Dual White) type with 3 wires (V+ WW CW) for color temperature adjustment. Single color strips will only respond to dimming.
  • Verify that the linked LED controller supports CCT and dimming functions.
• การรบกวน:
  • While 2.4GHz RF is robust, strong electromagnetic interference from other devices might affect performance. Try moving the remote or controller to a different location.

7. การรับประกันและการสนับสนุน

Information regarding product warranty and customer support was not available in the provided product data. For warranty details, technical assistance, or further inquiries, please refer to the official BTF-LIGHTING webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง