คู่มือผู้ใช้ ZTW Shark G2 Series 100A Bi-Direction Water Cooling Brushless ESC

1. บทนำ

This manual provides essential instructions for the proper installation, operation, and maintenance of your ZTW Shark G2 Series 100A Bi-Direction Water Cooling Brushless Electronic Speed Controller (ESC). Designed for RC boats and other DIY projects requiring bi-directional motor control, this ESC offers robust performance and reliability. Please read this manual thoroughly before use to ensure safe and optimal performance of your device.

2. ข้อมูลด้านความปลอดภัย

No specific safety information was provided in the product details. Users should always adhere to general safety guidelines when operating electronic speed controllers (ESCs) and RC equipment. Failure to do so may result in property damage, injury, or product malfunction.

• Always ensure correct polarity when connecting batteries to avoid short circuits and damage.
• Use appropriate battery types and voltages as specified for the ESC.
• Ensure all connections are secure and insulated to prevent accidental contact.
• ใช้งานในบริเวณที่มีการระบายอากาศที่ดีเพื่อป้องกันการเกิดความร้อนสูงเกินไป
• Keep the ESC away from water unless specifically designed for submersible use, even with water cooling.
• Disconnect the battery immediately after use and before any maintenance.

3. คุณสมบัติของผลิตภัณฑ์

The ZTW Shark G2 100A ESC incorporates advanced technology for superior control and protection:

• Super smooth, accurate, and programmable throttle linearity and throttle response.
• Integrated protection features including over-temperature protection, low voltage cut-off protection, and signal loss protection.
• Strong BEC output: 8A/5V continuous, with a peak of 10A.
• Supports high RPM motors and is programmable via a programming card or transmitter.
• High efficiency design with low resistance and low heat MOSFETs, powered by a 32-bit CPU.

This graphic highlights key features of the ESC, including its high-performance 32-bit CPU, bi-directional capability for forward and backward movement, and stable, accurate throttle response.

4. ข้อมูลจำเพาะ

5. เนื้อหาบรรจุภัณฑ์

เมื่อเปิดแพ็คเกจของคุณ คุณควรพบรายการต่อไปนี้:

• 1 x ZTW Shark G2 100A Bi-Direction Water Cooling Brushless ESC
• 1 x คู่มือผู้ใช้ (เอกสารนี้)
• 1 x Remote Controller (if included in your specific kit)
• 1 x Battery (if included in your specific kit)

Please inspect all components for any signs of damage before proceeding with installation.

6. การตั้งค่าและการติดตั้ง

Proper setup is crucial for the performance and longevity of your ESC. Follow these steps carefully:

1. การเชื่อมต่อมอเตอร์: Connect the three black wires from the ESC to the three wires of your brushless motor. The order of connection may affect motor rotation direction. If the motor spins in the wrong direction, swap any two of the three wires.
2. การเชื่อมต่อแบตเตอรี่: Connect the red wire from the ESC to the positive (+) terminal of your Lipo battery and the black wire to the negative (-) terminal. Ensure correct polarity to prevent severe damage to the ESC and battery.
3. การเชื่อมต่อตัวรับสัญญาณ: Plug the signal cable (usually a three-wire connector: red, white, yellow) from the ESC into the throttle channel (typically channel 2) of your RC receiver.
4. จุดเชื่อมต่อระบบระบายความร้อนด้วยน้ำ: Connect the water inlet and outlet tubes to the designated ports on the ESC. Ensure a continuous flow of water through the cooling system when the ESC is in operation, especially for high-performance applications.
5. การติดตั้ง: Securely mount the ESC in your RC boat or project, ensuring it is protected from excessive vibration and impact. Allow for adequate airflow around the unit, even with water cooling, to aid in heat dissipation.

This image displays the ZTW Shark G2 100A ESC from a top-down perspective, showing the main label with specifications and the various wire connections for motor, battery, and signal.

ด้านหนึ่ง view of the ESC, highlighting the robust wiring for power input (red/black), motor output (three black wires), and signal (red/white/yellow), along with the capacitors.

7. คู่มือการใช้งาน

Before initial use or if you change your transmitter, it is essential to perform a throttle calibration to ensure proper synchronization between the ESC and your remote control.

7.1. Throttle Calibration for Bi-Directional Operation (with Reverse)

1. Ensure your transmitter's throttle stick is at the neutral position.
2. Power on the ESC. You will hear a series of beeps.
3. Immediately move the throttle stick to the MAX (full forward) position. After another beep, indicating the maximum throttle point has been learned.
4. Move the throttle stick to the MINIMUM (full reverse) position. After a final beep, indicating the minimum throttle point has been learned.
5. Power off the ESC, then power it back on. The calibration is now complete.

7.2. Throttle Calibration for Forward-Only Operation (without Reverse)

1. Ensure your transmitter's throttle stick is at the MAX (full forward) position.
2. Power on the ESC. You will hear a series of beeps.
3. Immediately move the throttle stick to the MINIMUM (full reverse) position. After another beep, indicating the minimum throttle point has been learned.
4. Power off the ESC, then power it back on. The calibration is now complete.

บันทึก: Always perform throttle calibration for the first time using the ESC or if you change your transmitter to ensure correct operation.

8. การบำรุงรักษา

Regular maintenance helps extend the lifespan and ensure consistent performance of your ZTW Shark G2 ESC:

• การทำความสะอาด: After each use, especially in marine environments, gently clean the ESC and its cooling system to remove any salt, dirt, or debris. Use fresh water and a soft brush, then dry thoroughly.
• การตรวจสอบ: Periodically inspect all wires and connectors for signs of wear, fraying, or corrosion. Ensure all connections remain secure.
• ระบบระบายความร้อน : Verify that the water cooling lines are clear and free of blockages. A clogged cooling system can lead to overheating.
• พื้นที่จัดเก็บ: Store the ESC in a dry, cool place away from direct sunlight and extreme temperatures. Disconnect from batteries during storage.

9 การแก้ไขปัญหา

หากคุณพบปัญหาเกี่ยวกับ ESC โปรดดูขั้นตอนการแก้ไขปัญหาทั่วไปต่อไปนี้:

หากปัญหายังคงมีอยู่หลังจากพยายามแก้ไขปัญหาเหล่านี้แล้ว โปรดติดต่อฝ่ายสนับสนุนลูกค้า

10. การรับประกันและการสนับสนุน

ZTW and HAWK HOBBY provide a 100% free warranty for this ESC. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or contact the manufacturer directly.

For technical support, programming assistance, or any other inquiries, please reach out to your retailer or the official ZTW customer service channels.