คู่มือการใช้งานชุดประกอบโมเดล Estes 7315 สีน้ำเงิน Origin New Shepard

การแนะนำ

The Estes 7315 Blue Origin New Shepard Rocket Builder Kit is designed for intermediate model-rocket enthusiasts, ages 10 and up (supervision recommended for ages under 12). This kit allows you to build a 1/66th-scale model of Blue Origin’s New Shepard launch vehicle, capable of reaching altitudes up to 700 ft. when powered by Estes engines (sold separately).

สิ่งที่รวมอยู่

• Blue Origin New Shepard rocket kit
• Waterslide decals
• 15-inch parachute

The kit contains all necessary components for assembly, including the rocket body, fins, nose cone, engine retainer, waterslide decals, and a 15-inch recovery parachute.

การประกอบและการตั้งค่า

The estimated assembly time for this kit is approximately 1 hour, not including glue and paint drying time.

Required Tools and Supplies (Sold Separately):

• Masking primer tape
• ดินสอ
• ไม้บรรทัด
• กาวสีเหลือง
• มีดงานอดิเรก
• Medium CA glue
• กระดาษไข
• กรรไกร
• Clear coat (optional)
• สีขาว
• กระดาษทรายละเอียด
• Sand block

Before beginning assembly, ensure you have all the necessary tools and supplies, such as various glues, cutting tools, and finishing materials.

Operation & Launch

Engine Selection

The Blue Origin New Shepard rocket is compatible with Estes B4-4, B6-4, and C6-5 rocket engines. The C6-5 engine allows the model to reach its maximum projected altitude of 700 ft. Always refer to the rocket's packaging or instructions for a list of acceptable engines.

รายการตรวจสอบก่อนเปิดตัว

• Ensure the launch area is free of obstructions, dry weeds, brown grass, or highly flammable materials.
• Launch only during calm weather with little or no wind and good visibility.
• Always check with your local city government for any special regulations that may apply to your area.
• Follow the NAR (National Association of Rocketry) model-rocket safety code during operation.

The rocket's technical specifications indicate compatibility with specific Estes engines for optimal flight performance.

The flight sequence involves a safe launch, ascent, engine burnout, parachute deployment, and gentle descent for recovery.

Proper launch site dimensions are crucial for safety, ensuring sufficient clear space for rocket flight and recovery.

ระบบการกู้คืน

The kit includes a 15-inch parachute for safe recovery. Recovery wadding (sold separately) is essential to protect the parachute from the hot ejection charge of the engine.

Using Recovery Wadding

Insert recovery wadding into the body tube above the engine before each flight to prevent the hot ejection gases from damaging the parachute.

การซ่อมบำรุง

After each flight, inspect your rocket for any damage to the fins, nose cone, or body tube. Ensure the recovery system (parachute and shock cord) is intact and free of tears or tangles. Clean any residue from the engine mount area. Store the rocket in a cool, dry place to prevent material degradation.

การแก้ไขปัญหา

ปัญหาทั่วไปและวิธีแก้ไข:

จรวดปล่อยไม่สำเร็จ:

• Check connections: Ensure the launch controller clips are securely attached to the igniter wires.
• Battery check: Verify that the launch controller has fresh batteries (4 AA batteries required, sold separately).
• Igniter placement: Make sure the igniter is fully inserted into the engine nozzle and held in place by the igniter plug.

Rocket Flies Erratically:

• Fin alignment: Confirm that the fins are securely attached and properly aligned.
• Center of pressure: Ensure the rocket's components are assembled correctly to maintain proper flight stability.

ร่มชูชีพไม่กาง:

• Wadding: Verify that recovery wadding was used and properly packed to protect the parachute.
• Engine: Ensure the correct engine type was used and that it functioned properly.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

For warranty information and customer support, please refer to the official Estes webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง คุณยังสามารถเยี่ยมชม Estes Store on Amazon สำหรับทรัพยากรเพิ่มเติมและข้อมูลผลิตภัณฑ์