คู่มือการใช้งานชุดประกอบปริศนาไม้ 3 มิติ ROBOTIME Magic House Book Nook

การแนะนำ

Welcome to the world of miniature crafting with your new ROBOTIME Magic House 3D Wooden Puzzle Book Nook Kit. This manual provides detailed instructions to guide you through the assembly process and ensure proper use of your finished product. Please read all instructions carefully before beginning.

ข้อมูลด้านความปลอดภัย

• This kit contains small parts and is recommended for individuals aged 14 years and up. Keep out of reach of small children to prevent choking hazards.
• Exercise caution when handling sharp tools (if required, not included in this kit) and small wooden pieces.
• Ensure proper ventilation if using additional adhesives not provided in the kit.
• Batteries are not included. Please prepare 2 AAA batteries for the LED lighting feature.

เนื้อหาแพ็คเกจ

Before starting assembly, please verify that all components listed below are present in your kit. Refer to the image for a visual representation of the package contents.

รูปที่ 1: เกินview of the ROBOTIME Magic House Book Nook Kit package contents, including wooden sheets, instruction manual, wiring, and small accessories.

• Pre-cut wooden sheets for assembly
• LED light components and wiring
• Small decorative accessories (e.g., miniature books, signs, brooms)
• คู่มือการใช้งาน
• Adhesive (glue)
• ไขควง (ถ้ามี)

ติดตั้งและประกอบ

Follow these steps carefully to assemble your Magic House Book Nook. Patience and attention to detail are key for a successful build.

เคล็ดลับสำหรับการประชุมทั่วไป

• Organize all parts before starting. Match parts to the diagrams in the instruction manual.
• Gently detach wooden pieces from their sheets to avoid breakage. Use a craft knife if necessary for stubborn connections.
• Test fit pieces before applying glue.
• Allow glue to dry completely between steps where indicated to ensure stability.
• Refer to the detailed diagrams in the included printed manual for specific part identification and placement.

การประกอบทีละขั้นตอน

1. เตรียมฐาน: Begin by assembling the main structural components of the book nook. Ensure the base is stable and level.
2. Construct the Walls and Floors: Attach the side walls and internal floor sections according to the numerical sequence in your manual. Pay close attention to the orientation of each piece.
3. Install LED Wiring: Carefully route the LED wires through the designated channels as shown in the diagrams. Connect the wires to the light fixtures and the battery box. Ensure all connections are secure.
4. Assemble Miniature Details: Construct the smaller elements such as the magic shop facade, signs, books, and other decorative items. These add character to your book nook.
5. Integrate Decorative Elements: Place the assembled miniature details into their respective positions within the book nook. Use glue sparingly to secure them.
6. Attach the Front Panel and Top: Once all internal elements are in place and the wiring is complete, attach the front panel and the top section of the book nook.

Figure 2: An individual carefully assembling a wooden component of the book nook, demonstrating the detailed nature of the craft.

คำแนะนำการใช้งาน

Your Magic House Book Nook features an integrated LED lighting system to enhance its magical ambiance.

Powering the LED Light

• Locate the battery compartment, typically found at the bottom or back of the book nook.
• ใส่แบตเตอรี่ AAA 2 ก้อน (ไม่ได้รวมอยู่ในชุด) ลงในช่องใส่แบตเตอรี่ โดยตรวจสอบให้แน่ใจว่าขั้วบวก/ลบถูกต้อง
• ปิดช่องใส่แบตเตอรี่ให้แน่น

Activating the Light

The Magic House Book Nook is equipped with a touch-sensitive switch for easy operation of the LED light.

• Locate the touch switch, usually marked with a circular icon, on the exterior of the book nook.
• Gently touch the switch to turn the LED light ON.
• Touch the switch again to turn the LED light OFF.

รูปที่ 3: รายละเอียด view of the Magic House Book Nook, highlighting the miniature elements and the location of the touch switch for the LED lighting.

การซ่อมบำรุง

To keep your ROBOTIME Magic House Book Nook in pristine condition, follow these simple maintenance guidelines:

• ปัดฝุ่น: Regularly dust the book nook with a soft, dry cloth or a soft-bristled brush to remove accumulated dust. Avoid using abrasive materials or harsh chemicals.
• การจัดการ: Handle the book nook with care, especially when moving it, to prevent damage to delicate parts.
• การเปลี่ยนแบตเตอรี่: If the LED light dims or stops working, replace the AAA batteries. Ensure the book nook is turned off before replacing batteries.
• พื้นที่จัดเก็บ: Store the book nook in a dry environment away from direct sunlight and extreme temperatures to prevent warping or fading of materials.

การแก้ไขปัญหา

If you encounter any issues with your Magic House Book Nook, refer to the following common troubleshooting tips:

• ไฟ LED ไม่ทำงาน:
  • ตรวจสอบว่าใส่แบตเตอรี่ถูกต้องและขั้วถูกต้องหรือไม่
  • เปลี่ยนแบตเตอรี่เก่าด้วยแบตเตอรี่ใหม่
  • Ensure all wire connections are secure and not loose.
  • Verify the touch switch is functioning by gently pressing it.
• Loose or Broken Parts:
  • For loose parts, reapply a small amount of glue and hold in place until dry.
  • For broken parts, attempt to reattach with strong adhesive. If a part is irreparable or missing, please contact customer support.

ข้อมูลจำเพาะ

Figure 4: The Magic House Book Nook displayed with its approximate dimensions for reference.

การรับประกันและการสนับสนุน

ROBOTIME is committed to providing high-quality products and customer satisfaction. If you have any questions, concerns, or require assistance with your Magic House Book Nook Kit, please do not hesitate to contact our customer support team.

• บริการลูกค้า: For professional after-sales service, please refer to the contact information provided on the product packaging or the official ROBOTIME webเว็บไซต์.
• ส่วนที่หายไป: If any parts are missing from your kit, contact customer service with your purchase details and the specific part numbers required.