1. สินค้าหมดview
The KREG Pocket-Hole Jig 320 is designed to simplify the creation of strong pocket-hole joints for a wide range of woodworking projects. This durable tool works efficiently with standard material thicknesses, offering quick setup and versatile use for both indoor and outdoor applications.
คุณสมบัติที่สำคัญ ได้แก่:
- Precision Pocket-Hole Jig: Easily create strong pocket-hole joints for various projects.
- Easily Work with Standard Materials: Works with materials 1/2" to 1 1/2" thick, including common DIY sizes.
- Effortless Setup & Durability: Quick material thickness setup, plus sturdy construction with a lifetime drill-guide warranty.
- Versatile & Secure Design: Suitable for indoor or outdoor projects; with an anti-slip base, adjustable spacing, and a foolproof setup.
Figure 1: Kreg Pocket-Hole Jig 320 complete kit.
2. การตั้งค่า
Before beginning your project, ensure all components are present and properly prepared.
2.1 การแกะกล่องและการระบุชิ้นส่วน
The Kreg Pocket-Hole Jig 320 kit includes the main jig body, a Classic 2-inch Face Clamp, a step drill bit, a stop collar, a hex wrench, and a material thickness gauge/spacer.
Figure 2: The Pocket-Hole Jig 320 and Classic Face Clamp.
2.2 Adjusting for Material Thickness
The jig features a twist-apart design allowing for variable spacing and adjustment to different material thicknesses. Use the material thickness gauge to quickly set the jig for materials ranging from 1/2 inch to 1 1/2 inches thick. The gauge has etched markings for common sizes.
Figure 3: Adjusting the jig for variable spacing.
Figure 4: Preset settings for material thickness on the jig.
2.3 Setting the Drill Bit Stop Collar
Place the stop collar onto the step drill bit. Use the material thickness gauge to determine the correct position for the stop collar on the drill bit. Secure the stop collar firmly with the hex wrench. This ensures consistent drilling depth for strong joints.
Figure 5: Drill bit with stop collar and etched markings for easy setup.
3. คู่มือการใช้งาน
Follow these steps to effectively use your KREG Pocket-Hole Jig 320 for creating strong wood joints.
3.1 Securing the Jig to Material
Position the jig on your workpiece. The jig features an anti-slip base (GripMaxx™) for secure positioning. Use the included Classic 2-inch Face Clamp to firmly hold the jig and workpiece in place. Proper clamping is crucial for accurate drilling and preventing movement during operation.
Figure 6: The GripMaxx anti-slip base ensures secure clampการไอเอ็นจี
3.2 การเจาะรูแบบพ็อกเก็ตโฮล
- Ensure the jig is securely clamped to your workpiece.
- Insert the step drill bit (with the stop collar set) into the drill guide of the jig.
- Begin drilling at a moderate speed, applying steady pressure. The stop collar will prevent over-drilling.
- Once the stop collar makes contact with the jig, withdraw the drill bit.
- Repeat for additional pocket holes as needed for your joint.
3.3 Assembling Joints
After drilling the pocket holes, align the two workpieces to be joined. Use a suitable Kreg pocket-hole screw (sold separately) and a square-drive bit (often included with screws) to drive the screw into the pocket hole and into the adjoining workpiece. Ensure the pieces are held tightly together during assembly, ideally with a face clamp, to create a strong and flush joint.
4. การบำรุงรักษา
Proper maintenance will extend the life and performance of your KREG Pocket-Hole Jig 320.
- การทำความสะอาด: After each use, clear any sawdust or debris from the jig and drill bit using a brush or compressed air. Ensure the drill guides are free of obstructions.
- พื้นที่จัดเก็บ: Store the jig and its components in the provided case in a dry environment to prevent rust and damage.
- การดูแลรักษาดอกสว่าน: Periodically check the step drill bit for sharpness. A dull bit can lead to poor hole quality and increased effort. Replace if necessary.
5 การแก้ไขปัญหา
ต่อไปนี้คือปัญหาทั่วไปบางประการและแนวทางแก้ไขที่เป็นไปได้:
| ปัญหา | สาเหตุที่เป็นไปได้ | สารละลาย |
|---|---|---|
| Inaccurate or inconsistent hole depth | Stop collar not set correctly or loose. | Ensure stop collar is set to the correct depth for your material and tightened securely with the hex wrench. |
| Jig moves during drilling | ไม่เพียงพอ clamping pressure or anti-slip base is dirty. | Use the Classic Face Clamp to firmly secure the jig. Clean the anti-slip pads on the jig's base. |
| Difficulty driving screws or stripped screw heads | Incorrect screw length or type for material, or incorrect driver bit. | Ensure you are using the correct Kreg pocket-hole screws for your material thickness. Use a square-drive bit that fits the screw head properly. |
6. ข้อมูลจำเพาะ
| คุณลักษณะ | ค่า |
|---|---|
| ยี่ห้อ | เคร็ก |
| หมายเลขรุ่น | Kreg KPHJ320-22 |
| วัสดุ | โลหะ |
| ขนาดรายการ (ยาว x กว้าง x สูง) | 8.31 x 3.66 x 9.37 นิ้ว |
| น้ำหนักสินค้า | 2.16 ปอนด์ (0.98 กิโลกรัม) |
| สี | สีน้ำเงิน สีเงิน |
| สไตล์ | คลาสสิค |
| Compatible Material Thickness | 1/2 inch to 1 1/2 inch |
| ยูพีซี | 647096811990 |
| ผู้ผลิต | Kreg Tool Inc |
7. การรับประกันและการสนับสนุน
Kreg Tool Inc. provides a lifetime drill-guide warranty for the KREG Pocket-Hole Jig 320, reflecting their commitment to quality and durability. For specific warranty details, product support, or to inquire about replacement parts, please refer to the official Kreg webหรือติดต่อฝ่ายบริการลูกค้าโดยตรง
ผู้ผลิต: Kreg Tool Inc.
Webเว็บไซต์: www.kregtool.com
