คู่มือผู้ใช้ Aquacomputer Cuplex Kryos Next พร้อมชุดระบายความร้อนด้วยน้ำสำหรับ CPU รุ่น Vision 1700

1. บทนำ

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aquacomputer Cuplex Kryos Next with Vision 1700 CPU water block. This high-performance water block is designed for Intel LGA 1700 processors, offering efficient cooling and integrated monitoring capabilities through its Vision display.

Please read this manual thoroughly before proceeding with installation to ensure proper function and to prevent damage to your components.

2. ข้อมูลด้านความปลอดภัย

• Always disconnect power from your computer before installing or performing maintenance on any components.
• Water cooling systems involve liquids. Exercise extreme caution to prevent leaks. Test your loop for leaks thoroughly before powering on your system.
• Use only approved coolants for water cooling systems. Do not use tap water.
• Handle the water block and other components with care to avoid physical damage.
• เก็บให้พ้นจากมือเด็ก

3. เนื้อหาบรรจุภัณฑ์

ตรวจสอบว่าส่วนประกอบทั้งหมดที่ระบุไว้ด้านล่างมีอยู่ในแพ็คเกจของคุณ:

• Aquacomputer Cuplex Kryos Next with Vision 1700 CPU Water Block
• Mounting hardware for Intel LGA 1700 socket
• วางความร้อน
• แผ่นหลัง
• Hex key / Allen wrench
• Spreader tool (for thermal paste)
• เอกสารประกอบ (คู่มือนี้)

Image 3.1: Included mounting hardware, thermal paste, and tools for the Aquacomputer Cuplex Kryos Next water block.

4. การตั้งค่าและการติดตั้ง

4.1 ก่อนการติดตั้ง

1. Ensure your motherboard is compatible with the Intel LGA 1700 socket.
2. Clean the CPU surface thoroughly with isopropyl alcohol to remove any dust or residue.
3. Familiarize yourself with your motherboard's CPU socket area and the water block's mounting mechanism.

4.2 Mounting the Water Block

1. ติดตั้งแผ่นหลัง: Position the LGA 1700 backplate on the rear of your motherboard, aligning the holes with the CPU socket mounting holes.
2. ใช้วางความร้อน: Apply a small amount of thermal paste (pea-sized dot or thin line) to the center of your CPU's integrated heat spreader (IHS). Use the provided spreader tool if necessary to create a thin, even layer.
3. Position Water Block: Carefully place the Aquacomputer Cuplex Kryos Next water block onto the CPU, ensuring the mounting holes on the water block align with the backplate and motherboard. Avoid sliding the block once it makes contact with the thermal paste.
4. Secure Water Block: Use the provided mounting screws and springs. Tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) gradually until snug. Do not overtighten.

Image 4.1: The Aquacomputer Cuplex Kryos Next with Vision 1700 water block, showing its integrated display and mounting bracket.

Image 4.2: The copper cold plate of the Aquacomputer Cuplex Kryos Next, featuring a dense array of micro-fins for optimal heat transfer.

4.3 การเชื่อมต่อกับระบบระบายความร้อน

1. ติดตั้งอุปกรณ์: Screw your chosen G1/4" fittings into the inlet and outlet ports of the water block. Ensure they are hand-tightened securely.
2. เชื่อมต่อท่อ: Attach your tubing to the fittings, ensuring a secure and leak-free connection.
3. Integrate into Loop: Connect the water block into your custom water cooling loop. The flow direction typically does not significantly impact performance for this type of block, but consult your pump and radiator manuals for optimal flow paths.

4.4 การเชื่อมต่อทางไฟฟ้า

1. Vision Display: Connect the included USB cable from the water block to an available internal USB header on your motherboard. This powers the Vision display and allows for data communication with Aquacomputer software.
2. Optional Fan/Pump Control: If your water block includes additional fan or pump control features, connect the relevant cables to your motherboard's fan headers or a dedicated fan controller as per your system's requirements.

5. Operating the Vision Display

The integrated Vision display provides real-time monitoring of critical system parameters, typically CPU temperature. Once your system is powered on and the USB connection is established, the display will activate.

• การแสดงผลเริ่มต้น: The display typically shows the current coolant or CPU temperature.
• การควบคุมซอฟต์แวร์: For advanced configuration, such as changing displayed values, adjusting brightness, or updating firmware, download and install the Aquacomputer Aquasuite software from the official Aquacomputer webเว็บไซต์.

6. การบำรุงรักษา

Regular maintenance ensures optimal performance and longevity of your water cooling system.

6.1 Coolant Replacement

• It is recommended to replace your coolant every 6-12 months, depending on the coolant type and system usage.
• Drain the old coolant completely from your loop.
• Flush the system with distilled water or a dedicated flushing agent.
• Refill the loop with fresh, high-quality coolant.

6.2 Cleaning the Water Block

• If performance degrades or visible buildup occurs, the water block may need cleaning.
• Carefully disassemble the water block (refer to Aquacomputer's official guides if unsure).
• Clean the micro-fins and channels with a soft brush and distilled water. Avoid abrasive materials.
• Rinse thoroughly and ensure all components are dry before reassembly.

7 การแก้ไขปัญหา

8. ข้อมูลจำเพาะ

9. การรับประกัน

Aquacomputer products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Aquacomputer webหรือติดต่อฝ่ายสนับสนุนลูกค้า เก็บหลักฐานการซื้อไว้เพื่อใช้ในการเคลมประกัน

10. การสนับสนุน

For technical assistance, troubleshooting beyond this manual, or further product information, please visit the official Aquacomputer website or contact their customer support department. Online resources, FAQs, and forums may also be available.

Webเว็บไซต์: www.aquacomputer.de (อดีตampลิงค์จริงอาจแตกต่างกัน)