WOLFBOX USB C Hardwire Kit Instruction Manual

การแนะนำ

This manual provides detailed instructions for installing, operating, and maintaining your WOLFBOX USB C Hardwire Kit. This kit is designed to provide continuous power to your compatible WOLFBOX dash cam, enabling features like 24/7 parking surveillance and low voltage protection. Please read this manual thoroughly before installation to ensure proper and safe usage.

สิ่งที่รวมอยู่

Your WOLFBOX USB C Hardwire Kit package includes the following components:

• WOLFBOX USB C Hardwire Kit (main unit with USB-C connector, red ACC wire, yellow B+ wire, black ground wire)
• Multiple sizes of fuse taps (Micro, Mini, Small, Medium) for broad vehicle compatibility
• Trim removal tool for safe panel removal

Image: Complete contents of the WOLFBOX USB C Hardwire Kit package.

การติดตั้งและการตั้งค่า

Proper installation is crucial for the optimal performance of your hardwire kit. Follow these steps carefully:

รายการตรวจสอบก่อนการติดตั้ง

• Ensure your vehicle's engine is completely off.
• Disconnect the negative terminal of your car battery to prevent short circuits during installation.
• Confirm your dash cam uses a USB-C port for power.

Identifying Fuse Box and Ground Point

Locate your vehicle's interior fuse box, typically found near the driver's side dashboard or footwell. You may need to remove a panel to access it. Use the provided trim removal tool for this purpose.

ภาพ: อดีตample of fuse box location and suggested cable routing in a car interior.

Identify a suitable ground point, usually a metal bolt or screw on the vehicle's chassis near the fuse box. This is where the black ground wire from the hardwire kit will be connected.

การเชื่อมต่อสายไฟ

The hardwire kit includes three wires: red (ACC), yellow (B+), and black (Ground). You will use the appropriate fuse taps to connect the red and yellow wires to your fuse box.

• Yellow Wire (B+ / Battery Positive): Connect this to a fuse that provides constant power, even when the vehicle is off. This is essential for parking surveillance.
• Red Wire (ACC / Accessory Power): Connect this to a fuse that only receives power when the vehicle's ignition is on (e.g., cigarette lighter fuse). This signals the dash cam to switch between driving and parking modes.
• สายสีดำ (สายดิน): Securely attach this to the identified metal ground point on the vehicle's chassis.

Image: Detailed wiring diagram for the hardwire kit connections.

Image: Various fuse tap types included for compatibility with different vehicle fuse boxes.

Cable Routing and Testing

Carefully route the hardwire kit cable from the fuse box up to your dash cam, tucking it neatly along the vehicle's interior trim using the trim removal tool. Once all connections are made, reconnect your car battery's negative terminal and test the dash cam's functionality.

คำแนะนำการใช้งาน

The hardwire kit enables advanced recording features for your WOLFBOX dash cam:

ระบบรักษาความปลอดภัยที่จอดรถตลอด 24 ชั่วโมง

When connected to a constant power source (B+ wire), the hardwire kit allows your dash cam to monitor your vehicle even when the engine is off. This protects against theft and records incidents in the parking lot.

Image: Visual representation of 24-hour parking monitoring provided by the hardwire kit.

ปริมาณต่ำtagการป้องกันอี

The kit features a smart low voltage protection system. It will automatically shut off power to your dash cam if the car battery voltage drops to 11.6V (for 12V systems) or 22.8V (for 24V systems). This prevents draining your vehicle's battery, ensuring you can always start your car.

การบันทึกต่อเนื่อง

While driving, the dash cam will operate in normal continuous recording mode, powered by the ACC connection.

การซ่อมบำรุง

• ตรวจสอบการเชื่อมต่อสายไฟทั้งหมดเป็นระยะ เพื่อให้แน่ใจว่ายังคงแน่นหนาและปราศจากสนิม
• Ensure cables are not pinched or exposed to excessive heat or sharp edges.
• Keep the fuse box area clean and dry.

การแก้ไขปัญหา

• กล้องติดรถยนต์ไม่เปิดใช้งาน:
  • Check all fuse connections (ACC, B+) to ensure they are properly seated and receiving power.
  • Verify the ground wire is securely connected to a metal chassis point.
  • Ensure the USB-C connector is fully inserted into the dash cam.
  • Confirm the correct fuse type and rating are used for the fuse taps.
• ระบบตรวจสอบการจอดรถไม่ทำงาน:
  • Ensure the yellow B+ wire is connected to a constant power fuse.
  • Check your dash cam settings to ensure parking mode is enabled.
• ท่อระบายน้ำแบตเตอรี่:
  • The hardwire kit has built-in low voltage protection. If your battery is still draining, check for other vehicle electrical issues or consult a professional.
  • Ensure the dash cam's parking mode settings (e.g., sensitivity, duration) are not excessively high.

ข้อมูลจำเพาะ

การรับประกันและการสนับสนุน

WOLFBOX is committed to providing high-quality products and excellent customer service. Your hardwire kit comes with the following:

• รับประกัน 12 เดือน: ครอบคลุมถึงข้อบกพร่องจากการผลิตและการทำงานผิดปกติภายใต้การใช้งานปกติ
• นโยบายการคืนสินค้าภายใน 7 วัน: สำหรับการคืนสินค้าภายใน 7 วันนับจากวันที่ซื้อ
• การคืนสินค้าเนื่องจากสินค้ามีตำหนิ: Products with confirmed defects are eligible for return.

For any inquiries or support, please contact WOLFBOX customer service:

• อีเมล: service@wolfbox.com
• โทรศัพท์: +1 888 296 8399